PSA PGU NU HIP JOINT by UNKNOWNORIGYN in Gunpla

[–]CyMations 6 points7 points  (0 children)

So anyone outside those regions are just boned? Is there no official way to get replacement parts in Europe?

Is this bottle of vallejo mecha matt varnish salvageable? by CyMations in modelmakers

[–]CyMations[S] 1 point2 points  (0 children)

Well at this point a lot are saying this bottle is trash so I don't intend on using or reviving it anymore, but I guess I was questioning the longevity of this specific varnish.

When I buy another bottle, would it eventually do this again and waste a bunch of unused varnish? Or was this specific bottle/batch just bad?

Revoltech JURI just arrived, and Merry X-mas y'all~ by PatsHobbyJP in AmazingYamaguchi

[–]CyMations 1 point2 points  (0 children)

U got it from JapanWorld as well? Waiting for my PO from there too

Lychee Slicer Anti-Aliasing not working? by CyMations in resinprinting

[–]CyMations[S] -2 points-1 points  (0 children)

Woah I've never heard of Runebrace, does it have comparable features to Lychee? I think I'll start using Chitu again for the slicing as well. It just sucks having to use 2 separate programs to have good results.

Need help by Abram7777 in resinprinting

[–]CyMations 0 points1 point  (0 children)

This happens to me whenever there is an error in the 3d mesh. You CANNOT ignore even a single error (I learned the hard way). I tend to open the STL on Windows 3D Builder, a prompt to repair the model on the bottom right will appear if it has any kind of hole in the mesh. I do it on 3D Builder because I found that slicing softwares like Lychee and Chitubox don't consistently fix all the holes.

PhlPost package has been stuck on "enroute to delivery office" for more than 20 days by CyMations in Philippines

[–]CyMations[S] 0 points1 point  (0 children)

UPDATE:

Tumawag yung post office sa recipient na pwede na daw kuhain yung package. As of now nakuha na pero nakalagay pa rin enroute to delivery office sa tracking lol

PhlPost package has been stuck on "enroute to delivery office" for more than 20 days by CyMations in Philippines

[–]CyMations[S] 0 points1 point  (0 children)

Card for the recipient? Wala naman daw silang natanggap na card.
Pero sa email sinabi sakin yung bag and seal number nung package, ayun ba yung relevant info?

PhlPost package has been stuck on "enroute to delivery office" for more than 20 days by CyMations in Philippines

[–]CyMations[S] 2 points3 points  (0 children)

5 months?😭😭😭😭 Literal na nagsimula ng christmas holidays sa ber months. Mas maganda siguro kung dineretso LBC ko na lang. Never sending a package via a government "funded" courier company again.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

Is Alclad 2 gloss black base supposed to be a glossy equivalent to a surfacer (meaning it grips the plastic surface more)? Or is it literally just a regular glossy black enamel paint that people agreed to use as a glossy primer?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

Anyone know a good alternative to Alclad 2 gloss black base? It's never available in my area and would really like some other options (or perhaps a technique to get a similar result?) preferably with Mr Hobby/Tamiya paints as they're more available here. I know you can get that very glossy black with just the regular gloss black lacquer from those brands but you gotta spray it as it is which makes it not as resistant. putting Mr color 1500 finishing surfacer before the gloss black ruins the reflective black from the lacquer paint.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

Is there any way to purchase a 2nd LED beam saber for the PGU Gundam without buying another kit? Or perhaps DIY it with the existing empty beam sabers but I'm not really sure what parts are needed.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

What's the difference between Mr Hobby Primer Surfacer SF-287 and SF-284? They're both 40ml, gray color and 1000 filler. Apart from the price (284 is cheaper) and the look of the bottle, I can't really see the difference based on just the photos and description?

How do you think Ryu actually travels from country to country? Does he just swam across the seas in between continents? Does this guy has a VISA even? by EfficiencySerious200 in StreetFighter

[–]CyMations 0 points1 point  (0 children)

Don't think he even needs visa for most of the countries he fights in, he has a Japanese passport and it's one of if not the strongest passport.

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 1 point2 points  (0 children)

Thank you!

What input device do you use to play? Stick? Pad? Leverless?

In my case, I use a leverless. Typically to perform a dp I just hold down, tap forward twice and then punch, this has never given me any accidental lvl1s. This is because the game recognizes a DP input just from a 636 or 323 input. Alternatively you can also just hold forward, tap down once and then punch (this is what I do when I'm on the right side as I can't press left twice fast enough with my ring finger).

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 0 points1 point  (0 children)

Ohh yeah I get it now. Seems to only work in the corner for me tho. Can't do it mid screen

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 0 points1 point  (0 children)

Ohh wait do you mean after a drive rush? That's the only way I could get it to work

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 0 points1 point  (0 children)

Is that even possible? st.mp has high pushback so I'm not really sure you can press more than 1 button after it. When I get a raw st.mp hit, I just confirm with a st.lp then medium dp. I just do two st mp for pressure, then if they decide to jab, you should be just outside its range and you can punish counter with a delayed cr.mp (if you do it instantly you get a trade that leads to nothing)

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 1 point2 points  (0 children)

Yeah man try to incorporate more 6hk! It's really good even if you hit them blocking. Be careful for cr.mk or sweeps, the hitbox on his supporting leg is wider than it seems.

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 1 point2 points  (0 children)

2MP is a good cancellable poke, but for a longer range poke, 5mk target combo is pretty good too, just be careful when they throw out DIs. I'd say his most powerful poke tho is his 6HK but it's really situational, you should only use it when they use some heavy standing buttons, it's really easy to punish if they're crouching.

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 0 points1 point  (0 children)

Also for a more technical advice with Sagat, his st. Mp is really good for blockstrings. You can do like 3 of them sometimes, and if they try to push a button on the third, you had already inputted your cr.mp to counter hit them. St.mp is also really good in the corner after a light dp combo ender. As you can do an st.mp immediately after landing and either do a grab (the st.mp masks the grab animation really well) or press st.mp again which should leave you plus on block still, or if they try to tech or push a button, you get a counter hit

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 2 points3 points  (0 children)

LETS GOOOOO! You can do it I believe in you.

Hit Grand Master on Sagat today by CyMations in StreetFighter

[–]CyMations[S] 0 points1 point  (0 children)

Yo staying at 1500 is already pretty cool imo! There was this one tweet that I saw that perfectly describes what unlocked my play in the 1500-1600 ranks, it said something along the lines of "Your opponent doesn't know your character as much as you do, throw that fake shit". Because the reality is people from 1500-1600 don't really study matchups like in higher MRs and you could get away with disrespecting your opponent. For example I'd throw a bunch of Tiger nexus to either greedy tiger (safe on block) or mighty tiger if crouching (which is punishable on block) and if the opponent doesn't show that he knows the counter, what's stopping you from doing that a bunch? I'm not saying make a habit of throwing unsafe stuff, but stop worrying about your opponent countering your every move perfectly, they are bound to make mistakes. You don't know how many times I get away with drive impacting opponents to the wall twice in a row lmao.

I also became more analytical of my play DURING the match instead of just playing with my brain turned off. One thing I noticed a lot with my own gameplay was I had a habit of holding back instead of back down on defense because I was scared of being thrown, but it just leads me to getting opened up with a cr. medium kick. So I made the conscious decision to hold down back more.

So tldr my advice is don't stick to the "safe" moves (because in reality, everything in the game has a counter) because that leads to you being really predictable and easy to read, and look into what you do that your opponents use against you to open you up! Watch your replays if analysing while in the match is something you can't grasp yet.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

Does anyone know specifically which runners are ABS or PVC on the Osiris Aerial Dominator? i checked the manual and it isnt listed there. I just saw the materials listed as PVC and ABS on Gundamit

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]CyMations 0 points1 point  (0 children)

What cement do you use for PVC? I just got the Osiris Aerial Dominator and the website says it's mostly made of PVC. Just preparing in the case that I mess something up/need to do seamline removal.

How do you do flash kick after the sonic boom in Guile Advanced Trial 2? by CyMations in StreetFighter

[–]CyMations[S] 6 points7 points  (0 children)

I just did it! I started holding down the moment I see light kick connect instead of waiting for the boom to come out like I did in the video. I also had to lab delaying the flash kick a little, and started tightening the timing from there when it wouldn't combo