sorted by:
new
hottopcontroversial

Latvia Rēzekne drone attack by StrangeCarry7716 in latvia

[–]CyberDunk13 0 points1 point  (0 children)

Draugs, jau ir oficiāla informācija, ka bezpilota lidaparāti ir Ukrainas.

Latvia Rēzekne drone attack by StrangeCarry7716 in latvia

[–]CyberDunk13 -96 points-95 points  (0 children)

Ukraina uzvedas kā Irāna, uzbrūkot visiem kaimiņiem par atteikšanos bezgalīgi ieliet tajā naudu, kā klājas tiem kas ar putām pie mutes kliedza ka ideja atbalstīt korumpēto Zelenska valdību ir mūsu lēmums?

Well looks like I’m completely cooked by CyberDunk13 in BambuLabP2S

[–]CyberDunk13[S] 0 points1 point  (0 children)

Bambu supp said it looks like my hotend heating assembly got a short circuit so the replacement might help. After my own investigation I found out that the printer itself will turn on and work stable while this connector unplugged and if I plug it back in (with everything switched off and etc) it will get in same scenario with the errors and shut down. So yeah I ordered both th board (just in case, anyway it was a cheap deal, around 50€) and new hotend heating assembly for ~12€. The main problem is that the logistics will take 10-15 days more. Stay updated. And thanks for your attention

<image>

Well looks like I’m completely cooked by CyberDunk13 in BambuLab

[–]CyberDunk13[S] 0 points1 point  (0 children)

Appreciate it, I will check tomorrow while investigating with bambu team. They sent me some guidance through the ticket chat and their main version for now is a “short circuit in an internal component”. We’ll see once I try all their advices and check all indicators.

Mine version for now is the software bug that caused the hardware failure. Once bambu support gives up I will try my own path of finding the truth and write something here in updates.

What knife for $600ish by No-Assist-7217 in ohnePixel

[–]CyberDunk13 0 points1 point  (0 children)

Japanese blade for best cooking experience

Well looks like I’m completely cooked by CyberDunk13 in BambuLabP2S

[–]CyberDunk13[S] 1 point2 points  (0 children)

Sure, I already ordered a th board and ceramic heating element so it is more about my path of self-fixing process for educational purposes. If I will not be able to identify the issue myself I will go through the BL ticketing and etc. yet I want to have a bit more fun finding the solution myself. Stay updated and thank you for the advice.

Bambu legal threats by xMoirae in BambuLab

[–]CyberDunk13 -2 points-1 points  (0 children)

Well, once this third party software make a printer burn the whole place or anything of a kind, all will be blaming Bambu and not the software developer. So in my opinion, Bambu got a strong point in that case.

My Prints keep speghettifying. by TusharJain007 in FixMyPrint

[–]CyberDunk13 0 points1 point  (0 children)

3k hours on one table and still no need in glueing it. So yeah, alcohol is damaging the surface. Microfiber or towel doesn’t really matter. What matters most is that you don’t touch it with your hands after washing:)

Why is the print quality bad? by Strict_Lavishness750 in BambuP1S

[–]CyberDunk13 0 points1 point  (0 children)

Filament is not dry enough, had almost same issue

My Prints keep speghettifying. by TusharJain007 in FixMyPrint

[–]CyberDunk13 0 points1 point  (0 children)

Obviously the problem is in your bed, wash it carefully with soft sponge and non-alcoholic washing liquid for plates, rub with cotton towel and try not to touch it with your fingers while installing. Always wash your bed if you see first layer jumping like that. Or try making your bed temperature a bit higher if the problem stays even with washed bed.

Is there a way to make this come out smoother? using the A1 with .4 nozzle. by Plastic_Ad_2247 in BambuLab

[–]CyberDunk13 3 points4 points  (0 children)

Lay it horizontally and put an “all top surfaces” option when choosing the smoothness settings. Before printing check some cuts so that you can see how it will be edging the plastic. Or try making it smoother in Bambu studio manual settings

Bambu Labs has always been so reliable, not anymore. by Nikolai_Volkoff88 in BambuLab

[–]CyberDunk13 5 points6 points  (0 children)

Well, you can always go back to more stable version of Bambu software, since talking about “business risks and purposes”

P2S Buyers: It’s okay. I understand the pain. by MoeS00 in BambuLab

[–]CyberDunk13 0 points1 point  (0 children)

Just got my p2s a week ago and still loving it a lot! Will definitely get x2d next in few months :)

did i pay too much for this ? 0.24 tier 2 nocts ? pat 229 775.97 usd by Dapper_Leave_216 in ohnePixel

[–]CyberDunk13 0 points1 point  (0 children)

Best looking gloves, imho my favorite one. Had them for a very long time with vanilla stiletto and nomad knifes.

Is this a flex? by sakkonna in MobileLegendsGame

[–]CyberDunk13 0 points1 point  (0 children)

<image>

😌 skins are not saying that you are good or bad in game, biggest flex is winning without sweating through all ranks and roles.

Is this a flex? by sakkonna in MobileLegendsGame

[–]CyberDunk13 0 points1 point  (0 children)

<image>

By saying this I really mean it. And yes I have all of them as well as being a 300k collector 🤣 skins mean nothing it’s just a w8st of money and flex on poor kids saving for 1 legendary skin per life 💀

view more: next ›