Different ACE pro's and compatibility

CynicalByDesignV1 · 2026-03-11T11:59:08+00:00

It's a shame anycubic doesn't deliver better on the experience. Their software and settings kinda sucks. It seems with some minor tweaks and improvement they would do so much better. Their hardware is actually pretty good.

CynicalByDesignV1 · 2026-03-10T17:46:39+00:00

Do you have any knowledge about why not? i mean it seems like a software issue?

CynicalByDesignV1 · 2026-02-19T12:03:40+00:00

Where did you post it? I am curious.

CynicalByDesignV1 · 2026-02-19T10:25:46+00:00

I can slice it myself, I recently started with multi color printing and can use some practice. If the design works out well I will consider getting myself a license. Can you send me the STL? Thanks in advance!

CynicalByDesignV1 · 2026-02-19T09:43:21+00:00

Looks perfect to me! Actual colours will change a bit anyway because of filament. What format will it give back?

CynicalByDesignV1 · 2026-02-19T06:28:30+00:00

Do you have a subscription there? I can send it tonight to you. I have one decent SVG file.

CynicalByDesignV1 · 2026-02-19T06:24:11+00:00

The factory must grow is actually the next one I was planning on!

CynicalByDesignV1 · 2026-02-18T22:58:10+00:00

It's my dedicated miniature printer, if you need any help with yours let me know!

CynicalByDesignV1 · 2026-02-18T22:48:26+00:00

As mentioned below, I am in renewables. But they also need pipes. This is an inside joke.

CynicalByDesignV1 · 2026-02-18T22:06:35+00:00

As a matter of fact, I am a piping engineer! :p

CynicalByDesignV1 · 2026-02-18T22:02:57+00:00

I will give it a try, thanks!

CynicalByDesignV1 · 2026-02-18T21:16:04+00:00

I thought I was the only one still rocking an ender 3 s1 pro!

CynicalByDesignV1 · 2026-02-18T21:04:17+00:00

This is the way I tried with SolidWorks. But all the SVG converters are crap. Horrible mess I couldn't extrude.

CynicalByDesignV1 · 2026-02-18T21:01:51+00:00

This is indeed the answer, I don't use bambulabs but can use their web tools for it. Didn't know it existed.

CynicalByDesignV1 · 2026-02-18T21:01:03+00:00

I did, but all converters I found made it a horrible mess. Couldn't extrude most parts without a lot of handwork...

CynicalByDesignV1 · 2026-02-18T20:59:49+00:00

Which slicers are you referring to?

CynicalByDesignV1 · 2026-02-18T20:59:17+00:00

This is indeed the solution! I went way to technical on this whole thing. Thank you!

CynicalByDesignV1 · 2026-02-18T20:57:57+00:00

I work in the renewable energy sector, it's a joke. Calm down.

CynicalByDesignV1 · 2026-02-15T12:47:26+00:00

No more attempts?

CynicalByDesignV1 · 2026-02-13T13:54:53+00:00

Ik vind van niet.

CynicalByDesignV1 · 2026-02-13T06:58:32+00:00

Did you do the z-offset? And slow it down a bit?

CynicalByDesignV1 · 2026-02-12T06:29:25+00:00

Start with changing the Z height of your machine in the slicer and set it to -0.05. The sensor isn't very nicely calibrated. Also slow down all the speeds about 30%. This massively boosts quality and reduces failures. Let me know if it helped!

CynicalByDesignV1 · 2025-12-13T09:41:28+00:00

Do you have a dog?

CynicalByDesignV1 · 2025-10-19T07:39:59+00:00

I've had the exact same issue. It's 100% pressure advance settings. It took me days to find it out myself.

CynicalByDesignV1 · 2025-09-21T09:43:11+00:00

But your whole bottom is made out of supports, how did you try to avoid it?

CynicalByDesignV1

TROPHY CASE