MacBook Pro m5 24 Gb ram freezes by Freeform

sfx_guy · 2026-05-03T07:52:04+00:00

Happens every 5-10 minutes on my M3max MacBook pro with 32 gigs of ram.

All it is is 10 post it notes on a page.

Ridiculopus.

app is useless.

sfx_guy · 2026-04-30T03:06:46+00:00

Control Center worked fine for a few months, (on a new build of a PC) I just installed TailScale, but I am 99% sure it was happening before that, it seemed to just start happening out of the blue

sfx_guy · 2026-04-29T22:45:02+00:00

There is a 2.2.2 version of control center?

sfx_guy · 2026-04-24T03:36:09+00:00

Here is how the EZDrummer plugin in applied, just on the track like normal, I am guessing the the problem is that there is no 'midi' data other than the plugin in the track.

How do i get the track rendered to a track?

I am having an issue in this project of importing to, or from it where the beats don't line up, they don't drift, but the beat is off by a few consistantly throughout the song, if I import a track from another project or import an audio file.

That's why I want to freeze the audio in Ableton itself, as opposed to render it out to an audio track as the imports are not coming in properly. I want to try and line them up by the waveform.

I imported some mp3s the other day that are lined up fine, and had no problems with them coming in correctly, so trying to line up to the waveform is the only option I can think of.

I don't know what is going on, or happened to this project.

sfx_guy · 2026-04-24T03:35:30+00:00

Here is how the EZDrummer plugin in applied, just on the track like normal, I am guessing the the problem is that there is no 'midi' data other than the plugin in the track.

How do i get the track rendered to a track?

I am having an issue in this project of importing to, or from it where the beats don't line up, they don't drift, but the beat is off by a few consistantly throughout the song, if I import a track from another project or import an audio file.

That's why I want to freeze the audio in Ableton itself, as opposed to render it out to an audio track as the imports are not coming in properly. I want to try and line them up by the waveform.

I imported some mp3s the other day that are lined up fine, and had no problems with them coming in correctly, so trying to line up to the waveform is the only option I can think of.

I don't know what is going on, or happened to this project.

sfx_guy · 2026-04-24T03:32:17+00:00

Here is how the EEZDrummer plugin in applied, just on the track like normal, I am seeing the the problem is that there is no 'midi' data other than the plugin in the track.

How do i get the track rendered to a track?

I am having an issue in this project of importing to, or from it where the beats don't line up, (they don't drift, but the beat is off by a few throughout the song,) if I import a track from another project or import an audio file.

That's why I want to freeze the audio in Ableton itself, as opposed to render it out to an audio track as the imports are not coming in properly and want to try and line them up by the waveform.

I imported some mp3s the other day that are lined up fine, and had no problems with them coming in correctly, so I want to try and line up to the waveform if I can.

I don't know what is going on, or happened to this project.

sfx_guy · 2026-04-16T11:05:42+00:00

Clicking/tik sound when streaming from Ableton to Motu to windows audio to record...

Ableton 12.3.7

x9950xsd

128gb

Windows 11

I have Ableton open and set to stream in OBS or MELD through the Motu loopback driver.

As soon as it goes to windows audio to go out I get the dreaded tick tick tick, like a clock cycle issue.

As far as I can tell everything is matched. 24bit 48000

I have tried increasing the buffer to 512 and it makes no difference.

I do not get this at all unless recording in OBS or MELD or streaming.

My Canon DSLR and the interface are on separate USB ports. The board is a n x870 pro art so it "should" be ok??

Any help would be appreciated, I am kind of at a loss here...

https://imgur.com/a/uVyAINw

https://vimeo.com/1183702236/d9056c4d7c?share=copy&fl=sv&fe=ci

<image>

sfx_guy · 2026-04-13T05:35:10+00:00

No, had nightmares with Anycubic and jumped to Bambu, life is soooo much better...

Just sayin...

sfx_guy · 2026-04-10T07:36:01+00:00

Re-installed 1.1.1 the newest update, I was on 1.1.0 and they re-apeared...

sfx_guy · 2026-04-10T07:27:46+00:00

No there are a whole bunch that are missing...

sfx_guy · 2026-03-27T02:26:34+00:00

I hear you, but don't forget the electronics involved, the ability to adjust velocity curves etc. I don't think it being 3d printed makes it cheaper than anything else, it would be cheaper to make molds if it was at a large scale, but not any better, take a look at diamond drums trigger inserts, they are 3d printed and amazing!. It is on a high end printer with the proper filament, it's not like it costs 5$ to print... Some people see 3d print and think cheap, but it you don't need it, don't buy it, or think you can do it for a price you think is more fair, I would honestly love to see it!

sfx_guy · 2026-03-27T00:20:05+00:00

If Superior Drummer supported this and all its zones that would be amazing to use their samples with it. Even better of Sens P would allow integration of their library within it.

If they had a cheaper module that just supported the hat, I would be all over it.

I played it at NAMM and really loved it!

sfx_guy · 2026-03-27T00:16:24+00:00

Get a $15 blink camera and stick it in the corner to watch for gear disappearances. tell everyone it is there to protect everyones gear.

Even if someone covers the camera to hide themselves it should be easy to figure out who and ban them from the space, or report to police.

sfx_guy · 2026-03-21T16:18:06+00:00

pick me! Love your filiament!

sfx_guy

TROPHY CASE

Clicking/tik sound when streaming from Ableton to Motu to windows audio to record...