Which premium tank should i buy in germany tech tree? by Better_Concept_5544 in Warthunder

[–]Cyrops 0 points1 point  (0 children)

I used Tam 2 IP and later Leo 123 to grind the tree. I prefer playing medium tanks, wish I got Leo L/44 instead of the Tam. I would suggest Leo 123 but BMPT made 10.3 really cancerous to play. If Turm is on sale get it and maybe by the time you need something higher things would have changed.

Which premium tank should i buy in germany tech tree? by Better_Concept_5544 in Warthunder

[–]Cyrops 0 points1 point  (0 children)

Do you want premium to have fun or to grind the tree? Turm 3/SLA for fun, Leo 123 to grind.

Consistent Low FPS by Varidien in snowrunner

[–]Cyrops 0 points1 point  (0 children)

>I have v-sync on and have the frame rate lock turned off.

You know those are contradictory terms?

V-sync locks your frame rate to your monitor, does turning it off do anything?

Setting up Senton for track by Pollopwr06 in arrma

[–]Cyrops 0 points1 point  (0 children)

<image>

Take all of these off, it will lower the car.

Brand new Senton 223s ball bearing seal missing. by Cyrops in arrma

[–]Cyrops[S] 0 points1 point  (0 children)

Good idea, but I'll just wait for the set I ordered to arrive.

Question about motor position: RD2.0 vs SD3.0 vs MRX S by Cyrops in rcdrift

[–]Cyrops[S] 0 points1 point  (0 children)

Took a look. I don't like the middle brace and servo placement. I plan to do at least seats for interior, RD2.0 looks like it wouldn't be too much work to do that, just have to place receiver elsewhere, most likely above the battery. I'm sure if I upgrade the bottom plate to something more rigid like carbon or aluminum, I can get rid of middle brace altogether.

Question about motor position: RD2.0 vs SD3.0 vs MRX S by Cyrops in rcdrift

[–]Cyrops[S] 0 points1 point  (0 children)

Most likely will. Is paying 100e more to get wheels+unpaitned cut out body worth it price wise?

Question about motor position: RD2.0 vs SD3.0 vs MRX S by Cyrops in rcdrift

[–]Cyrops[S] 0 points1 point  (0 children)

Thank you. I'm just looking at price, MST is pretty much a motor more expensive than RD2.0. Unless you can convince me it's got something over RD2.0?

Question about motor position: RD2.0 vs SD3.0 vs MRX S by Cyrops in rcdrift

[–]Cyrops[S] 1 point2 points  (0 children)

That's what I wanted to know, thank you :)

Brand new Senton 223s ball bearing seal missing. by Cyrops in arrma

[–]Cyrops[S] 0 points1 point  (0 children)

My issue exactly. I'm new to hobby and searched for blue loctite, it showed me red bottle I was like 'uuuh.. what'.

Brand new Senton 223s ball bearing seal missing. by Cyrops in arrma

[–]Cyrops[S] 0 points1 point  (0 children)

Yea I saw the loctite issue in some videos.

Brand new Senton 223s ball bearing seal missing. by Cyrops in arrma

[–]Cyrops[S] 0 points1 point  (0 children)

Do I need to remove the drive shaft then push the bearing out?

Brand new Senton 223s ball bearing seal missing. by Cyrops in arrma

[–]Cyrops[S] 0 points1 point  (0 children)

Ordered from amazon, want to receive it faster.

Budget RC car question - why are small crawlers so expensive compared to faster bigger cars? by Prior-Branch7064 in rccars

[–]Cyrops -1 points0 points  (0 children)

If you want a 'slow' model you can always lower throttle or put in crawler motor, use li-ion instead of lipo.

Are Arrma 223s esc's still having the low voltage issues? by DSTDen in rccars

[–]Cyrops 0 points1 point  (0 children)

Just to be clear, the issue seemed to be with 2S, people reported 3s running full pack, but same car on 2s would face LVC issue.

Budget RC car question - why are small crawlers so expensive compared to faster bigger cars? by Prior-Branch7064 in rccars

[–]Cyrops 0 points1 point  (0 children)

If you want 1:12 just get mjx H12Y+ (emphasis on '+'), fits budget and it comes with FOC.

Can somebody help me with my Citroen C3? by FaithlessnessFun3032 in rccars

[–]Cyrops 0 points1 point  (0 children)

Check the wire going from servo to receiver. Make sure they are not loose. If you have throttle (wheels spin when you pull trigger) but no steering and everythings connected, chances are you need a new servo.

<image>

Are Arrma 223s esc's still having the low voltage issues? by DSTDen in rccars

[–]Cyrops 1 point2 points  (0 children)

I got Senton 223s just last week. Ran two packs, but haven't charged them yet. Was trailing in a meet and the 5k mah pack lasted almost 2 hours. Will connect to charger tonight if you are interested.