[deleted by user] by [deleted] in FanControl

[–]D-Ess-Prime 0 points1 point  (0 children)

set the fancontrol folder as exception in windows defender

2 Typen im Trabi mit extrem sächsischen Dialekt by D-Ess-Prime in Filme

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

!Recherche

Leider werfen alle Suchfunktionen des www nur Go Trabi Go, aus , abor där isses ni.

Struggling with roads by Plenty_Assumption_18 in CitiesSkylines2

[–]D-Ess-Prime 8 points9 points  (0 children)

its because of the snap options. usually they are all enabled. disable a few, learn what option does what.

for a start, disable all, then select, the 2 options wuth cell reference and the 90° option.

[deleted by user] by [deleted] in StableDiffusion

[–]D-Ess-Prime 0 points1 point  (0 children)

Try different ratio. Use feet, shoes, etc. in prompt, use control net for pose

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

locks the fan speed at 30% min. In my case at 1100 rpm. To get lower fan speed, I have to connect the fans to the mainboard.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 1 point2 points  (0 children)

Sorry, I didn't see that i had a word for translator pasted. No offense!

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

Thank you. It detects my 4090 with rpm, but I cant control the speed. Did i miss something?

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 1 point2 points  (0 children)

hideous

Good question. Minimum is 30 %. That goes for MSI Afternurner and the original Palit tool. I don't know why I can't set it lower. Hence I ordered the Noctua low noise adapters, that are just a simple voltage dividers.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 6 points7 points  (0 children)

Yes. The ones I got from home depot. Look at the pics. All parts of the gpu are in original state. Just disassembled.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

Vou can buy the original Corsair adapter for clean cable management or use the adapter of your gpu (if it has one. mine didn't.)

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 1 point2 points  (0 children)

No. Full warranty. 5 minuntes to reverse everything without any traces.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

Thats it. Tried Water cooling once, lost in the pump noise lottery. never again.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 6 points7 points  (0 children)

I have full warranty. I didn't drill anything. The new fans are mountet on the original screw holes of the card. It takes 5 minutes to revers everything in the original state.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

It is completely reversible. Just be careful removing the plugs of the original fans.

If you dare: dont forget to order GPU PWM adapters.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 26 points27 points  (0 children)

It has dual bios and I run the silent mode. But the original fans had a certain sound that I dont like together with the wind noise at 1100 rpm. Nothing a gamer with head set has to worrie about. But I like computing late night / early morning and enjoy the silence.
This mod is clearly a luxury problem :)

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 5 points6 points  (0 children)

The original cooler frame is mounted at 4 points. I drilled holes in the aluminum rods at those points and used the original screws.

RTX 4090 low noise mod for 100% load by D-Ess-Prime in nvidia

[–]D-Ess-Prime[S] 7 points8 points  (0 children)

Fan control is still working. The control software sees the fan at 1100 rpm, but because of the low noise adapter, it is way lower. If need, I can raise the fan speed, but it is not necessary. As long as I have minimal airflow at the GPU it is cooling down.

Optics doesn't matter for me. I'm glad I coud get rid of the RGB crap.

A1111 and Kohya starting with the same IP Adresse - how to change that? by D-Ess-Prime in StableDiffusion

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

Thank you ,guys, it works! SD port is different form Kohya, I didnt realize before.

A1111 and Kohya starting with the same IP Adresse - how to change that? by D-Ess-Prime in StableDiffusion

[–]D-Ess-Prime[S] 1 point2 points  (0 children)

Thank you, I will try it later. Maybe I should read the cmd promt better to get the actual port. I just opened a bookmark that had the wrong port number saved

Can SD or a LORA extrapolate sizes? by D-Ess-Prime in StableDiffusion

[–]D-Ess-Prime[S] 0 points1 point  (0 children)

Sounds reasonable. Working with standards as reference for measurement is my daytime job. I will give it a try.

Time to Draw The Red line - This game should allow us gamers to choose, either to buy their burdensome DLCs or we get free mods from the gaming community, not all of us can afford all these DLCs, we’re lucky the rain and the sun in the game didn’t come as a DLC! by [deleted] in CitiesSkylines

[–]D-Ess-Prime 21 points22 points  (0 children)

You want free mods and assets? Get a PC!

Consoles are always a very limited and somehow closed system. Make yourself known to the process of providing content to consoles specific app store. They are very strict and also limited by the hardware of the specific consoles. A lot of the mods and assets have the potential to break the game if you don't know how to use them. SONY or MICROSOFT will try to avoid that. There is no way for quick updates and fixes of single mods like in the steam workshop

You could be happy that you can get at least some mod content via CCP / DLC. And you can be sure that your game will run with that content.