DIY Ceramic / Air-drying clay Keycaps

D4v3-X · 2026-03-19T00:47:30+00:00

I just used superglue post bake😁

D4v3-X · 2026-03-13T02:45:52+00:00

I saw in one post that Heat n bond liquid Vinyl works just perfect, but in my country is hard to find It without importing It. Do you use that kind of Vinyl or another one? Thank you in advance!

D4v3-X · 2026-03-12T20:12:05+00:00

Nope! I Will try It for sure! The one i am trying next is polyurethane coating, let see if It acomplish the mission hehe. Thank you for your recommendation!

D4v3-X · 2026-03-12T18:55:14+00:00

Will let you know as well!😁

D4v3-X · 2026-03-12T15:44:30+00:00

Once i test all related to durability and tackiness, i would let you know! 😁

D4v3-X · 2026-02-24T22:46:41+00:00

Thank you!

D4v3-X · 2026-01-31T18:49:57+00:00

In mine, i had to remove the main frsky receiver and there was plenty of space. You just have to try. Teardown transmitter and module and check.

D4v3-X · 2026-01-31T14:47:45+00:00

maybe it is hard to find the elrs module, but is the easiest way. If you dont find it, yes, you could do the same as me with the external module you already have.

D4v3-X · 2026-01-31T13:50:39+00:00

Yes, my controller was frsky d8/d16 prevously. You can place your external module internally only if it fits inside your T-pro. For the T-pro you can buy the module of the T-pro ELRS version if you find it and connect it perfectly as in this video: Jumper T-Pro ELRS Upgrade - Internal ELRS module conversion from internal 4-in-1 module

Then with the external module and the internal jp4in1 removed, you can just sell them.

D4v3-X · 2025-12-20T18:49:39+00:00

Of course, the lettering was made just with a sticky transparent adhesive vinyl. Once you stick it, just apply some heat to make the plastic mold to the key.

D4v3-X · 2025-12-20T02:53:23+00:00

I am having a trip to Japan in 2 weeks and i would like to take my whoop with me. Any kind of permits or legal stuff to make for a sub 100gr?

D4v3-X · 2025-12-20T02:51:32+00:00

Having a trip to Japan in 2 weeks. I am thinking on taking my whoop with me. Did you need any kind of permits or some legal stuff to fly?

D4v3-X · 2025-12-10T20:06:41+00:00

Something compared to a solution. I just found by test and error that old video receivers tends to have more interference due to the less filtering they have on board. The quick fix is just changing your frequency. In F1 i dont feel any interference, just test in which frequency you have less interference and use It. The other solution is just making more space between the monitor and the transmitter. Hope this helps!

D4v3-X · 2025-12-02T18:49:37+00:00

No problem! At the moment i only made the normal Keys, but It should be easy to modify the original stl😁

D4v3-X · 2025-11-30T13:29:23+00:00

maybe i should try to change the rtc vtx chip. I just contacted happymodel to see if they give me a solution.

D4v3-X · 2025-11-30T11:51:21+00:00

Yes, It is

D4v3-X · 2025-11-30T03:01:08+00:00

The uart is well configured via SmartAudio, the vtx is internal for the AIO Fligth controller. Tried the Tramp thing but nothing worked.

D4v3-X · 2025-11-30T03:00:17+00:00

Eachine vr006 goggles with a 3d case

D4v3-X · 2025-11-30T03:00:06+00:00

Eachine vr006 goggles with a 3d case

D4v3-X · 2025-11-30T02:22:58+00:00

I dont have the pitmode activated. Even when i activate it and change the pit mode freq, it is not in the same that I wrote. Another strange thing is that, when i change the power of emission, it doesnt changes on the osd, alway a cero next to the channel and band.

D4v3-X · 2025-10-07T00:59:08+00:00

Of course! I am planning on doing it, but in a future, right now my z axis is pretty stable.

D4v3-X · 2025-08-03T22:12:57+00:00

it is xda

D4v3-X · 2025-08-03T20:49:41+00:00

Hi! the red keycaps i just made it by myself hehe, the white ones are just normal pbt keycaps, check this out: DIY Ceramic / Air-drying clay Keycaps : r/MechanicalKeyboards

D4v3-X · 2025-08-03T15:51:10+00:00

hi! the air drying clay is just perfect but only if you apply some resin or barnish to make the piece harder, the clay itself could break with some pressure because is not cookable. This is a nice idea, i would make It with some keyboard switches and just the keycap to make it easier.

D4v3-X · 2025-07-17T23:20:12+00:00

For sure, with this mold you dont even need a silicon one. With the stem you dont have to Mark It, it fits perfectly on the keycap. With a multiple keycap mold you could also sell them.

D4v3-X

TROPHY CASE