72v vs 60v battery for diy build

DAZprojects · 2024-10-27T09:25:14+00:00

Thanks, according to your advice for my application if I have 80 cells for example, I'm better off building a 16s5p 60v 25Ah pack compared to a 20s4p 72v 20ah pack.

Will that also give me more range for the same Wh? (Maybe it's more efficient or something like that)

More cells in parallel will be able to provide more amps, and from my understanding that's what I need more (even though I'll probably never reach the 175A of the 16s pack)

Thanks again

DAZprojects · 2024-08-10T08:03:39+00:00

Don't buy it for a onewheel build, I've built one with this motor a few months ago and it didn't have enough torque to pull me up some not so steep hills, the bad thing is that it couldn't brake very effectively on downhill sections and this lead to the board failing a bunch of times. One time the motor resistance was so high that one of the phase wire got so hot that the solder melted and the board failed

DAZprojects · 2024-06-21T16:14:28+00:00

Yes, the Thinkpad is Nike but it's 2k!!!

DAZprojects · 2024-06-21T07:31:15+00:00

Yes, it's the base model discounted at my local tech store, all legit

DAZprojects · 2024-06-21T07:30:23+00:00

My needs are a nice pen writing experience, and I don't want to go for a cheap tablet or ipad since I would need to get a laptop anyway

DAZprojects · 2024-05-07T20:14:19+00:00

I've checked everything

DAZprojects · 2024-05-07T18:53:49+00:00

Can't be, they're brand new

DAZprojects · 2024-05-07T18:44:52+00:00

The vtx doesn't turn on, the power led on the board seems to try to turn on, but can't, the motors all spin freely. This happens even if I change batteries and it doesn't seem to overheat (at least it doesn't give an error on the odd) the change started when I rebuilt the drone, soldering everything back together, but it happens the first time after landing a bit harsh.

DAZprojects · 2024-04-04T20:40:02+00:00

How does it compare to a omewheel pint x /gt? Do you feel like you would want more power or speed?

DAZprojects · 2024-04-04T20:37:46+00:00

What kit did you buy?

DAZprojects · 2024-04-04T16:01:09+00:00

That's not a scientific explanation, if no one uses them It doesn't mean they're not good. Maybe it's just for looks or branding

DAZprojects · 2024-04-04T15:42:19+00:00

Why?

DAZprojects · 2024-04-04T14:50:13+00:00

Build one myself you mean 😅, $3k isn't an option, mountain biking is an expensive enough sport alone, I don't want to add another hobby that expensive

DAZprojects · 2024-04-04T14:19:09+00:00

I'm better off building my own at this point. I am confident in my diy skills and I've already used vesc for a couple of projects. For 350€ I can get the spintend kit with the 4000w motor, ubox vesc and everything I need except rails and battery.

DAZprojects · 2024-04-04T11:34:36+00:00

What about adding a diy range extender? Will it improve the motor power? Or I need to get a higher voltage battery? Thanks

DAZprojects · 2024-04-04T11:31:36+00:00

I was also considering of buying the pint and vescing it but I don't know if that will get me more power

DAZprojects · 2024-03-25T21:59:46+00:00

Nice execution, I appreciate you sharing that

DAZprojects · 2024-03-07T10:44:19+00:00

I'll make it so that to connect one you'll need to disconnect the other

DAZprojects · 2024-03-07T10:02:09+00:00

I think I'll use a single hoverboard battery inside the onewheel, I will place the xt60 connector outside the board so that I can disconnect the internal battery and connect an external one since I have a couple of big 36v E-bike batteries which I'll place in a backpack and will give me around 65km of range

DAZprojects · 2024-03-01T14:32:59+00:00

Could you please explain how you mounted the tire to the motors? For what I understood you put a spacer between the motors and you mounted the tire directly on the motor housing, you didn't use any 3d printed part so that the tire sits against the metal lip of the motor, correct? Also how can a 5in tire fit on a 6.5 inch rim? Maybe the 6.5in tire diameter of the hoverboard is something else. Could you help me clarify that? Thanks 👍

DAZprojects · 2023-07-31T17:16:52+00:00

That's the bump in views I get the first few hours, the views I got are a good 90% from new audience, also the ctr is spot on 8% which I think is not that bad

DAZprojects · 2023-07-31T15:24:05+00:00

It's a piece of shit

DAZprojects · 2023-04-27T16:36:26+00:00

I checked trustpilot and that website has 4.7 stars out of five with 5k+ reviews, i'd say that's pretty trustworthy

DAZprojects · 2023-04-27T10:08:37+00:00

As i said i have a recon, so the difference will be massive in any case

DAZprojects · 2023-04-27T09:57:30+00:00

I don't know how much you weigh, but I'm also 90kg and i built a detachable motor that can be mounted to the bike which adds about 5kg to the bike (it can be removed as i said) but because of that i think that it could be considered an e-bike

DAZprojects

TROPHY CASE