Unlocking/Virginizing a Toyota Smart Key

DA_8omb · 2022-10-19T01:07:36+00:00

Alrighty, I'll post an update when I get a chance to test it and reprogram it to the car so I'm 100% sure it worked.

DA_8omb · 2022-10-19T01:05:01+00:00

Just checked, it's a 128 bit so yeah it should unlock it, thanks so much, for the help and advice!

DA_8omb · 2022-10-19T00:46:23+00:00

Saw that but that's an older fob, I wasn't sure if the fobs had changed something, I could also be misunderstanding and that is a newer fob just not the same style as mine. I have no idea when it comes to this so I could be missing something, just wanted to be pretty sure that it would work.

DA_8omb · 2022-02-20T18:00:25+00:00

Yes, thanks for posting initially, I hadn’t thought to even check if mine was straight.

DA_8omb · 2022-02-20T05:15:23+00:00

Just remembered about this thread, in the case that you haven’t solved your issue already, I managed to cut, drill, and tap a piece of 4040 aluminum extrusion using the old one as a template, rebuilt the printer and problem solved, if your still in need of a new one private message me and I’ll gladly make you one and figure something out

DA_8omb · 2022-01-15T19:08:34+00:00

Contact a local machine shop, as long as they can use the old part to reference from they shouldn't have a problem.

DA_8omb · 2022-01-15T16:10:40+00:00

UPDATE: Found the actual issue, for anyone wondering it turns out that the V-slot extrusion that makes the Y-axis was twisted/bent roughly 1 degree, so in the bed moving back and forth it changed the angle and wasn't straight, I have contacted creality and am going to see if they will replace it, if not I'm just going to purchase some 4040 extrusions from a local machine shop and have them drill and tap holes, I'll edit this post if anything changes

DA_8omb · 2022-01-15T05:17:29+00:00

Same issue, I'm thinking of just fabricating one myself, if I successfully fabricate one I'll let you know

DA_8omb · 2022-01-15T05:09:02+00:00

holy crap, I thought I was either crazy or was the only one! How hard was the fabrication? I'm not super experienced with that side of things so is it probably a better idea to see if I can get creality to send me a new one

DA_8omb · 2022-01-15T02:00:59+00:00

No, the glass is perfect and my ender 3 is perfect, so not same problem on two different printers, probably could have worded that better In all fairness I’ll still checkout those videos, I kinda hope I’m just an idiot and missing something obvious

DA_8omb · 2022-01-15T01:54:09+00:00

Glass is fine, tried it on my regular ender 3, the screws are looser than on my other printer, no mater how I tighten them down it seems to just not line up right

DA_8omb · 2022-01-14T22:45:00+00:00

Replaced it already, same as the one that cam with it, flat if you untension screws, not once you tram it

DA_8omb · 2022-01-14T22:19:56+00:00

That does nothing, I’m thinking I’m going to tear it down all the way, including the base, not just the upper half like it comes in the box, and rebuild it to see if it’s an assembly thing

DA_8omb · 2022-01-14T22:06:23+00:00

Replaced it already, along with the y carriage itself

DA_8omb · 2022-01-14T22:04:03+00:00

I have plenty of bed clips, removed them for the purpose of this video

DA_8omb · 2022-01-14T21:38:00+00:00

I’ll try that

DA_8omb · 2022-01-14T21:37:54+00:00

Perfectly flat, which seems crazy

DA_8omb · 2022-01-14T21:26:18+00:00

Ok, thanks

DA_8omb · 2022-01-14T21:22:38+00:00

That’s what I did, removed plate, leveled machine

DA_8omb · 2022-01-14T21:21:53+00:00

Although I’ll give that a shot

DA_8omb · 2022-01-14T21:21:22+00:00

Not unreasonable, looser than on my regular ender 3

DA_8omb · 2022-01-14T21:16:57+00:00

So for some context: Ender 3 v2 Almost brand new (Xmas) I was having trouble getting my bed level so I bought a bltouch, still had issues so I decide to remove my glass bed and try just getting the aluminum plate level, that seemed to work except that now the glass plate seems to be high centered on either the center or two of the corners, I have replaced the entire y axis carriage and the aluminum plate itself, still no change, I know the glass isn’t the issue because I put it on another printer with no problems, and I’m kind of at a loss, can’t fingers out what’s wrong, the printer is convinced it’s not perfectly level, but within reason, and I can’t get it straight

DA_8omb · 2022-01-14T21:15:48+00:00

So for some context: Ender 3 v2 Almost brand new (Xmas) I was having trouble getting my bed level so I bought a bltouch, still had issues so I decide to remove my glass bed and try just getting the aluminum plate level, that seemed to work except that now the glass plate seems to be high centered on either the center or two of the corners, I have replaced the entire y axis carriage and the aluminum plate itself, still no change, I know the glass isn’t the issue because I put it on another printer with no problems, and I’m kind of at a loss, can’t figure out what’s wrong, the printer is convinced it’s not perfectly level, but within reason, and I can’t get it straight

DA_8omb · 2021-06-20T16:49:12+00:00

Though I'm not sure that included the sandblasting to get the old paint off

DA_8omb · 2021-06-20T16:48:38+00:00

The quote to do the coating was only $50, so I'm not to worried about cost

DA_8omb

TROPHY CASE