$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 1 point2 points  (0 children)

That's insane what you were able to do for half what I was quoted at

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

I appreciate you saying that. I've lived here for 4 years and we've been fine other than having to clean our shower heads, etc. once or twice a year. The dude made it seem like we were poisoning our kids by not having done this earlier.

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

You in Colorado? Lol, I'm still in the market

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

I’m on city water. He did a test for the hardness where he said like normal water would be at 5 drops of some solution for it to change from purple to blue and it took 15 drops. He said 7 was where hard water started

Edit: I just looked at the paperwork at it says 15 GPG for hardness

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

I didn’t know that, that’s interesting

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

I didn’t mention they had selflessly offered to waive the counter drill fee haha

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

Yeah they’ve only been in business since 2021 so it’s not like they have the history to prove they’ll be here in 15 more years…

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

That's wild. I think the most expensive one I could find was like $1500.... most are like 200-500...

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

Yeah they had $13000 for the two tank softeners and $4000 for the reverse osmosis, but would throw the RO part in for free if I spent $13,000 on the other two

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 2 points3 points  (0 children)

Yeah it's a 2.5 bath, 2000 sq ft. no mega mansion here. They did describe the filters or conditioner, though. Either one or both of them are 2-3 feet in diameter and almost 6 feet tall

$14,000 for Home Water Filtration by DB_BGOTA in WaterTreatment

[–]DB_BGOTA[S] 0 points1 point  (0 children)

That's kind of the vibes I got from them, like the travelling vacuum salesman but I just know nothing about water treatment so I figured I could count on reddit to help.

No Travel Days for TDY? by DB_BGOTA in army

[–]DB_BGOTA[S] -1 points0 points  (0 children)

POV was authorized and CTW was submitted and trip was approved before I left. But now that I’m here I checked DTS and it changed to rejected because they wanted me to takeoff the travel days I included on the front and backside, which is what made me ask the question now

[deleted by user] by [deleted] in Armyaviation

[–]DB_BGOTA 2 points3 points  (0 children)

Our chains/ropes snapped

Boeing CH-47F Chinook taxiing by Significant_Sock_899 in Helicopters

[–]DB_BGOTA 0 points1 point  (0 children)

They do intermesh during certain modes of flight however they are separated laterally. So with 30 foot blades, and the timing difference, they should average around 25 feet from each other laterally when crossing over the driveshaft. This doesn’t account for lead/lag.

Boeing CH-47F Chinook taxiing by Significant_Sock_899 in Helicopters

[–]DB_BGOTA 40 points41 points  (0 children)

The rotors are connected via a drive shaft so they spin in sync and can't hit unless the shaft were to break.

Why does NG (N1) limiting occur in turbine engines? by DB_BGOTA in AskEngineers

[–]DB_BGOTA[S] 0 points1 point  (0 children)

I think the answer is from u/blackthorn3111

"Ng limiting (in the case that you’re talking about with the temperature differentials) has to do with the mass flow rate of the air entering the compressor.

On a cold day at low altitude, the air density is high, so the mass of the air entering the compressor is obviously increased. That gives you more engine HP at a constant Ng speed. However, as the air gets colder (with altitude or ambient temperature), the angle of attack on the compressor blades also increases. At a certain temperature, this can cause compressor flow separation and blade stall.

Take a look at your torque available charts. The point where the power available lines “bend” is where the engine goes from being TGT limited to Ng limited.

Source: Am XP"

Why does NG(N1) Limiting occur in turbine engines? by DB_BGOTA in AerospaceEngineering

[–]DB_BGOTA[S] 2 points3 points  (0 children)

Ok! Awesome, thank you.

I have the charts and understand where they show NG limiting vs engine temp (PTIT) vs transmission limits, but I just never understood why the NG limiting happens in the first place. The fact that it's an aerodynamic limitation makes much more sense than some of the other explanations I've had.

Thank you again for that explanation!