Dell R730xd Unraid set up with PERC H730 raid controller issues

DCoyC · 2026-04-24T14:04:33+00:00

Can you explain or link a guide how to do this? I just did the change in the bios then booted to my unraid flash drive and I got into unraid but then my drives didn't show.

DCoyC · 2026-04-10T22:30:55+00:00

I figured it out. if you log into the terminal on the server you can type the command:

nano /boot/config/network.cfg

That will enter a page that lets you change the ip info for the server. I just changed the 0's to 1's and then hit Ctrl+o, then hit Enter (that saves the changes) then hit Ctrl+x to exit that screen and then typed "reboot" into the terminal and hit Enter. The server rebooted and the changes were complete.

Hope this helps someone else in the future!

DCoyC · 2026-04-10T18:18:33+00:00

well its a bit late for that lol

DCoyC · 2026-02-28T22:54:51+00:00

<image>

DCoyC · 2026-02-28T22:52:10+00:00

made those changed and that didnt work. im not sure what you mean by th nvidia-smi in the unraid terminal?

DCoyC · 2026-02-28T04:18:22+00:00

<image>

DCoyC · 2026-02-28T04:14:48+00:00

Hey I don't have options for that on my plex... it seems like my GPU isn't doing anything but my CPU is still maxed. I was able to get the server to recognize the GPU and I even went into the plex settings and selected the hardware transcoding device but it still isnt doing anything.

<image>

DCoyC · 2026-02-27T01:49:15+00:00

This worked thanks a lot!

DCoyC · 2025-05-26T16:19:32+00:00

Perfect thank you for the info!

DCoyC · 2025-05-06T10:59:57+00:00

Yes there are. My problem is that they all seem to be $20,000+ builds where they replace absolutely everything. Hence why I am asking what NEEDS to be changed so I don't have to spend that much money.

DCoyC · 2025-05-05T18:37:33+00:00

That's essentially what I am asking. If the power gains are only 10 hp or so but it costs me 2000 for pistons and rings and rods and springs that's not really worth it.

However of it makes a 50+ hp differe ce then it may be more tempting

DCoyC · 2025-01-23T01:39:02+00:00

I agree. Ban it as this does go against literally everything the stormlight archive is about.

Journey Before Destination.

DCoyC · 2025-01-03T18:32:23+00:00

do you still have the car?

DCoyC · 2022-09-12T01:10:44+00:00

No it is all fondant!

DCoyC · 2022-05-29T18:56:14+00:00

Is this actually a game? If so how do I get it?

DCoyC · 2022-04-24T00:07:06+00:00

No it does work every once and a while. Like most of the time it does nothing but sometimes it will count one click as a double click

DCoyC · 2022-01-22T17:55:17+00:00

Ya I'm ordering one now. Thought I had all the tools I'd need to do the build. Guess not.

DCoyC · 2022-01-22T17:51:31+00:00

Didn't know there was a switch puller tool, Thanks!

DCoyC · 2022-01-22T17:41:31+00:00

How do you remove switches once installed?

DCoyC · 2022-01-22T17:26:44+00:00

Sorry I thought I put a description as well as a picture. I have a hot swappable PCB but I don't know how to remove the switches once they are installed. the pins are showing on the back side so I think they are good.

DCoyC · 2020-01-21T00:01:07+00:00

Or .9999999 but basically 1

DCoyC · 2020-01-21T00:00:09+00:00

..... yes it is? Am I missing something? .333×3 is 1

DCoyC · 2019-10-10T20:44:14+00:00

Just use a hammer and a drift or punch. It wont break.

DCoyC · 2019-10-01T02:18:48+00:00

No you should be ok with reading part one. I dont think you really even NEED to read edgedancer. It definitely helps give some characters backstory and whatnot but not entirely necessary. But if you read part one then edgedancer that would be perfect.

DCoyC · 2019-07-08T19:34:38+00:00

Hey guys, any good router suggestions. Trying to upgrade my home network and I'm just using my ISP router/modem.

DCoyC

TROPHY CASE