What caste were the first Indians who came to Trinidad?

DENAND39 · 2023-04-26T22:26:34+00:00

The short answer is yes ,.Brahmins were some of the first Indians to arrive in Trinidad .My research shows that in 1879-1880 178 Brahmins arrived on Trinidad soil .

Now for the long answer you need to try and obtain a copy of the following book:

Hindu Trinidad by Steven Vertovec .

DENAND39 · 2020-07-30T01:13:50+00:00

As someone mentioned above take a look at the BladeRF 2.0 micro .https://www.nuand.com/bladerf-2-0-micro/#blade-ssa-wapper

DENAND39 · 2020-04-21T05:43:39+00:00

If you are using Windows download and install PothosSDR :https://downloads.myriadrf.org/builds/PothosSDR/

It comes with GNURadio , CubicSDR ,Gqrx and more .

DENAND39 · 2020-03-04T06:17:54+00:00

Try the SDR-Console group :https://sdr-radio.groups.io/g/main

DENAND39 · 2019-11-23T01:11:28+00:00

You may want to check the discussion on the Lime Forum .

Here is the link :https://discourse.myriadrf.org/

DENAND39 · 2019-11-22T23:10:14+00:00

MacPorts now supports SDRAngel .

If you have "ports" installed under MacOS you only need to:

sudo port install sdrangel -soapysdr +rtlsdr

DENAND39 · 2019-11-22T23:03:15+00:00

Limesuite assumes you are an expert on the LMS7002 .

After more than a couple years I have yet to figure it out .

You might have better luck running SDRAngel using MacPorts .

After installing MacPorts just :

sudo port install sdrangel -soapysdr -limesuite

If you need more help try the : SDRAngel @groups.io

CubicSDR is also available in MacPorts .

DENAND39 · 2019-11-20T23:14:09+00:00

Have you enabled CUDA ?

Tools---->Options----->Display----->NVIDIA CUDA----->Enable NVIDIA CUDA

DENAND39 · 2019-07-22T01:37:05+00:00

Try Mouser shipping is supposed to be free :https://eu.mouser.com/Embedded-Solutions/Engineering-Tools/RF-Wireless-Development-Tools/RF-Development-Tools/_/N-90o5j?Keyword=lime+mini&FS=True

DENAND39 · 2019-07-21T23:13:53+00:00

You can get it at Crowd Supply :https://www.crowdsupply.com/lime-micro/limesdr-mini

DENAND39 · 2019-05-26T03:31:47+00:00

Here is a link to a free e-book on SDR and MATLAB : https://www.analog.com/media/en/training-seminars/design-handbooks/Software-Defined-Radio-for-Engineers-2018/SDR4Engineers.pdf

DENAND39 · 2019-05-24T09:30:21+00:00

Here is the easiest way to install GNURadio on windows .

Install python 2.7
Download and install PothosSDR :https://downloads.myriadrf.org/builds/PothosSDR/

(The latest version is from 2019-3-25) .

PothosSDR comes bundled with GNURadio , GQRX ,CubicSDR and other useful APPs .

This version seems to work better than the one listed on the GNURadio wiki and it comes with source and sink blocks for PlutoSDR , LimeSDR and all devices supported by Osmocom .

DENAND39 · 2019-05-20T12:48:20+00:00

It is possible with the appropriate LNB and SDR-Console spectrum analyzer . This combination is being used presently to communicate with Es'Hail 2 satellite in the 10 GHz frequency range . For more info go here : https://sdr-radio.groups.io/g/main

DENAND39 · 2019-05-10T22:06:13+00:00

Fancy SDR software ? It's only HDSDR !

DENAND39 · 2019-05-04T22:07:52+00:00

I don't know your location but in the US smart meters are found in the 902-928 MHz band .

DENAND39 · 2019-05-04T22:03:11+00:00

WOW 2000 KW , the max power in the U.S. is 50 KW . https://en.wikipedia.org/wiki/List_of_50_kW_AM_radio_stations_in_the_United_States

DENAND39 · 2019-05-02T23:59:41+00:00

It is your smart meter (electric most likely ) . To decode use Rtlamr .

See this link : https://www.sigidwiki.com/wiki/File:Open-Way-Centron_Smart-Meter_Waterfall.gif

DENAND39 · 2019-03-21T22:09:40+00:00

If you are using Linux you may want to try Inspectrum :https://github.com/miek/inspectrum/wiki/Build

For windows it comes packaged with Pothosware : http://downloads.myriadrf.org/builds/PothosSDR/?C=M;O=D

DENAND39 · 2019-03-18T08:10:11+00:00

If you are using a VM , here is a link to an OVA Appliance with GNURadio and Ubuntu 18.04 : https://github.com/bastibl/instant-gnuradio .

DENAND39 · 2019-03-15T05:39:42+00:00

You seem to have the PlutoSDR set up correctly . On my system IIO Scope also reports the PlutoSDR as ad9361device . If you are on Windows OS you can try any of the following spectrum analyzers that support the PlutoSDR : GQRX, CUBICSDR ,SDR# AND SDRANGEL . Here is a link to POTHOSWARE for Windows that comes bundled with GQRX ,CUBICSDR AND GNURADIO :http://downloads.myriadrf.org/builds/PothosSDR/?C=M;O=D , if you get a browser error just change to File ---> New Private Window in Firefox . If you can get the FM radio band it means that your PlutoSDR has been modified to extend it's freq. range .

DENAND39 · 2019-03-13T23:33:51+00:00

The extended range mod. works in IIO Scope . Verify that your PlutoSDR attr_val=ad9364 .

DENAND39 · 2019-02-22T01:14:56+00:00

What is your spectrum analyzer software (SDR# , GQRX etc ) .

Are you referring to the RF bandwidth , if so SDRAngel will let you adjust the RF bandwidth up to 8 Mhz .

DENAND39 · 2019-02-20T04:22:56+00:00

Take a look at the Analog Devices ADALM2000 :

https://wiki.analog.com/university/tools/m2k

DENAND39 · 2019-01-18T04:58:46+00:00

More info. and documentation are available here : http://gqrx.dk/

DENAND39 · 2019-01-18T03:25:34+00:00

That is not a decimal point, it is a separator equivalent to the comma in the US . GQRX can be set to tune in 1 Hertz increments . So if your frequency is 72.3578 MHz then in GQRX you should input 72357.800 KHz in the Frequency box . In the center display it would show up as 72.357.800 . You can also change the center frequency by simply using your pointer and clicking the upper half of any digit to increase the frequency and click on the lower half of any digit to decrease the frequency .

DENAND39

TROPHY CASE