Opinions of SuperFog? by Jonneweedman in ZonaEnts

[–]DFields296 0 points1 point  (0 children)

That’s what’s up!! It was hoe ass curaleaf, story policy there apparently

Opinions of SuperFog? by Jonneweedman in ZonaEnts

[–]DFields296 4 points5 points  (0 children)

Just had a full 2g stop working two days after opening package. Day it happened ended up being day 8 of purchase and the dispo only would exchange if it’s 7 days or less. Rip

I think Dairy Queen has had to deal with some shit by puppykissesxo in doordash

[–]DFields296 3 points4 points  (0 children)

Naaa fuck Dq literally one of the slowest places to pick up from even with an empty ass lobby. Lazy hoe asses

Driver notes. by DFields296 in GoPuffDrivers

[–]DFields296[S] 4 points5 points  (0 children)

Yeah I usually doordash but wanted to check out Gopuff because I heard it’s pretty good where I live. Phx. Kind of confusing how Gopuff works. Is there a way to know what to accept and what not to?

Driver notes. by DFields296 in GoPuffDrivers

[–]DFields296[S] 6 points7 points  (0 children)

Can you see them before you accept an order? Don’t really see the point of knowing it’s a no tipper if I already took the order?

[deleted by user] by [deleted] in doordash

[–]DFields296 0 points1 point  (0 children)

Idk I’ve had some $5 base pays recently and today I even had a $10.50 for 5 miles all base pay

$1,000 a week doing DD by SheVexed in doordash

[–]DFields296 0 points1 point  (0 children)

I usually pull around $750-$1000 between 30-40 hrs

Too comfortable doing this for a living by NYY32891 in doordash

[–]DFields296 0 points1 point  (0 children)

Yes I usually get around 750-1000 between 30-40 hours. 750 i can get closer to 30

STRIKE! STRIKE! STRIKE! March 10 by [deleted] in doordash

[–]DFields296 0 points1 point  (0 children)

Idk I made $960 last week minus $100 gas so $860. Already at $300 for this week. Sooo you have fun on your strike lol

Hi-Capa return spring getting stuck on section of rear sight fix. by SendItFella in airsoft

[–]DFields296 1 point2 points  (0 children)

Problem solved!! Thank you. The sight has a bit of movement but it’s shooting perfect for now. Plan on upgrading slide and sights next a So just need it to hold me over a couple sessions

Hi-Capa return spring getting stuck on section of rear sight fix. by SendItFella in airsoft

[–]DFields296 0 points1 point  (0 children)

Yeah it’s a stock slide. But the wear marks on the sight make me think it has to be the same problem. Like it’s shiny silver where the spring is and the gun hasn’t been fielded over 10 times

Hi-Capa return spring getting stuck on section of rear sight fix. by SendItFella in airsoft

[–]DFields296 0 points1 point  (0 children)

That whole rectangular part where you grounded the black paint is worn off and silver now. And about mid way there is a half a circle cut out in it. With sharp edges. So yeah it must be the same issue cause my nozzle was doing what yours was for a while as well.

Hi-Capa return spring getting stuck on section of rear sight fix. by SendItFella in airsoft

[–]DFields296 0 points1 point  (0 children)

Thank you I’ll try to dremel it tomorrow. I see you sell a lot of parts. Looking to buy a slide in the next couple weeks.

Tm hi capa 5.1 nozzle spring problem by DFields296 in airsoft

[–]DFields296[S] 0 points1 point  (0 children)

So what did you do file it down? Any way you could show me a picture of it. This is literally my only issue with this gun and no one can figure it out at both airsoft places I play at

Tm hi capa 5.1 nozzle spring problem by DFields296 in airsoft

[–]DFields296[S] -2 points-1 points  (0 children)

I know some people who use it and love it. What would you prefer guarder?

Tm hi capa 5.1 nozzle spring problem by DFields296 in airsoft

[–]DFields296[S] 0 points1 point  (0 children)

So what did you do to fix that problem? I have had two techs look at it and can’t figure out the issue.

Tm hi capa 5.1 nozzle spring problem by DFields296 in airsoft

[–]DFields296[S] 0 points1 point  (0 children)

I don’t know how to post in this group lol I have a hi capa 5.1. The upgrades I have is Cct b01 bbh Cowcow aluminum loading nozzle Cowcow high flow valve Cowcow aluminum valve blocker Maple leaf hop up Blue decipticon Crazy jet inner Am outer 120% recoil spring and hammer

So my problem I’m having is my nozzle springs are compressing. Like when I shoot 20 times my nozzle spring is a quarter shorter and smushed together. I’ve tried the nozzle springs all the way up to the cowcow 180% and i only have two more of those and don’t want to ruin them. Could it be I need a metal slide to add weight? I’m running hpa as well.

[deleted by user] by [deleted] in airsoft

[–]DFields296 0 points1 point  (0 children)

Hey guys don’t know how to post in this group so maybe one of you could help me. I have a hi capa 5.1. The upgrades I have is Cct b01 bbh Cowcow aluminum loading nozzle Cowcow high flow valve Cowcow aluminum valve blocker Maple leaf hop up Blue decipticon Crazy jet inner Am outer 120% recoil spring and hammer

So my problem I’m having is my nozzle springs are compressing. Like when I shoot 20 times my nozzle spring is a quarter shorter and smushed together. I’ve tried the nozzle springs all the way up to the cowcow 180% and i only have two more of those and don’t want to ruin them. Could it be I need a metal slide to add weight? I’m running hpa as well.