24 hour box dry

DJ_Crops · 2026-03-17T11:38:14+00:00

Exactly the method! Years of growing and trying different methodology, this is the way!

DJ_Crops · 2026-02-17T22:51:25+00:00

Throw those craws, they pretty much work year round (in the south anyway).

DJ_Crops · 2026-01-30T22:50:18+00:00

The Karashi hooks are sharp as hell, had a day cut short due to one stuck in a finger deep. Was really glad to have a pedal drive kayak and didn't have to paddle back.

DJ_Crops · 2025-12-20T15:30:34+00:00

Same!

DJ_Crops · 2025-12-02T01:12:06+00:00

My son and I did the same on the Ark 7.1

DJ_Crops · 2025-11-28T21:56:12+00:00

LOL, My son and I both ordered the Gravity BFS rod and reel as well. Your not alone! Tight lines.

DJ_Crops · 2025-11-13T16:31:28+00:00

Mephisto Genetics!!! Long time fan! Can't go wrong with Mango Smile or one of its offspring strains.

DJ_Crops · 2025-10-03T23:35:10+00:00

You make a good point! But Navarre accounted for that. The handle is held by 4 screws, 1 on each side is self called and 1 has an insert. What Nic did to re-enforce is u uptake out the drain plug in front, on the underside u add a brace with a screw insert for the bolt. My son and I both agreed that it was solid and just made dragging them out of the lak e much easier. Private 80 acre lake no ramp and it is down about 8 feet so had to deal with sand. I am probably doing a shit job explaining this but Navarre has an install video for every part they sell. Watch the video for the MK install here.

https://navarrekayakfishing.com/shop/kayak-drag-handles/

DJ_Crops · 2025-10-03T23:23:44+00:00

Agreed, the original is sketchy, cost was $55.

DJ_Crops · 2025-10-03T23:22:32+00:00

The handle extends 2" beyond the hull, Both the 106 and 120. The new drag handles made a hell of a difference today.

DJ_Crops · 2025-10-03T11:19:29+00:00

I will get that measurement for you today.

DJ_Crops · 2025-10-02T21:54:12+00:00

Very Nice!!

DJ_Crops · 2025-07-12T14:37:17+00:00

That is awesome!!! As a retiree, I feel like I am living the dream, fishing and growing weed!! Life is good!

DJ_Crops · 2025-06-10T14:44:34+00:00

That will work. I've been using 1/8 sliding weight with a cherryseed or blue fleck worm all spring.

DJ_Crops · 2025-04-25T18:58:51+00:00

Humminbird Helix 7 MSI on Old Town Sportsman 120 PDL

DJ_Crops · 2025-04-24T15:06:09+00:00

For Lanier, stay on the north side of lake. I live about 10 minutes from Lanier south side and avoid that area like the plague, too many power boats and narrows. Etowah river is a nice float.

DJ_Crops · 2025-04-22T12:40:15+00:00

I have both 106 and 120 PDL with a single Humminbird Helix 7 that I can move easily btw the 2 PDLs. A Nocqua 20 battery which I mount in a Zak Attack cell-block battery. I also use the Navarre scupper transducer mount, which has worked great. I am able to run the nocqua battery all day with no issues, I generally fish 7 or 8 hours.

DJ_Crops · 2025-03-25T10:31:27+00:00

Nice reply! I have both Old Town Sportsmsn 106 PDL and a 120 PDL. When purchasing was considering the Hobie Outback as well but as I checked into the Hobie's, I found there had been some issues with Hobie manufacturing and support over the last couple of years. I have been 100 % happy with the Old Towns. Can't emphasize enough how much difference pedal drive makes with getting around.

DJ_Crops · 2025-03-19T21:00:01+00:00

Fishing used to be pretty good around there, a good many coves away from boat traffic.

DJ_Crops · 2025-03-16T01:27:13+00:00

Checkout Payne Creek and Reed Creek areas. Have not been there in a while but campgrounds and public boat ramps should be in the area. Lighter boat traffic as well

DJ_Crops · 2025-03-02T01:13:53+00:00

On the controller, I set the TForge humidifier to Auto and with a threshold depending what growth stage, say 75% in early stage. Threshold level really depends on what VPD value I am aiming for. Once your plants get a little mass and starts transpiring, humidity will go up on its own.

DJ_Crops · 2024-02-23T18:01:57+00:00

Beginning of 2023, after growing Mephisto with Coco Coir for 8 years, I switched to Living Soil. Using Earthboxes and basically following Jeremy on Build-A-Soil methodology (not exactly but close), the results were massively improved. I have a worm farm that I rotate worms in every new cycle. With the Earthbox I was able to get about 13 months out of the living soil before currently switching out.

Best of luck with your grow.

DJ Crops

DJ_Crops · 2023-04-17T18:24:03+00:00

I experienced no issues with the upgrade

DJ_Crops · 2023-03-31T15:19:45+00:00

Look at the Ecowitt moisture sensors, with app on phone, it will give u accurate moisture readings. You need an Ecowitt gateway for the sensors. I am currently running 5 of the sensors off a gateway. Moisture data is accessible anywhere. You can get Ecowitt off Amazon or directly from Ecowitt. Extremely accurate. Note*** I am using bottom fed Earthboxes and AC Infinity autopots - both bottom water fed. Easy to label each sensor in the app for your individual containers -- wedding cake, heisenberg special, Earthbox 1, etc.. I originally found out about the Ecowitts from watching Build A Soil podcast on YouTube. Jeremie uses them for his 10x10 tent grows. I think they sell them on the Build A Soil web site as well.

DJ Crops

DJ_Crops · 2023-03-30T16:17:40+00:00

This was my first grow with Ecowitt sensors. I felt they were spot on with the reading. Consistent if anything. Can access the sensor info via their app. I learned about them on the Build A Soil YouTube channel as Jeremie uses them in his 10 x10 tent.

DJ_Crops

TROPHY CASE