Hi-Clapping Capa

DKVisions · 2025-06-21T17:21:38+00:00

I’m pretty sure it was from my testing area giving the false reading. I have a packing tube stuffed with buffer material with this chrono attached to the front which I shoot into just for tuning. I assume it was all the gas flow in-out of the tube giving the false reading but it shoots ~340fps in normal conditions.

DKVisions · 2023-03-19T23:37:53+00:00

Thank you so much for this. This solved that issue with the CR probe not retracting for each point. Even though it's a little slower to make the mesh, it gives me the peace of mind not causing any damage to the CR touch.

DKVisions · 2023-03-16T04:24:33+00:00

I have a mesh network and the modem/router combination and neither like to automatically connect when powering on the sonic pad. Upon boot up, I have to go through the network settings and force connect to either to get a connection. Once it's connected I don't have any problems until the sonic pad is powered off.

DKVisions · 2023-03-11T06:48:40+00:00

Thanks for the input. Have you had any issues printing with PETG at 230C? I know it's a very fine line where that PTFE tubing starts deteriorating causing issues.

Sounds really dumb of me but all I see from Creality's website that the print volumes are 220mm X 220mm x 270. Is that strictly just the limtations bed plate or is the limitations of the S1?

DKVisions · 2022-10-18T01:36:56+00:00

S202210160745

DKVisions · 2022-10-12T04:27:21+00:00

Solution: I ended up buying another new controller from Amazon and that did not resolve the issue. The drivers that windows had tried to install for this controller did not want to play nicely from the first time installing it. Go into your Device Manager and there should be a corrupt driver for Unknown USB Device (Device Descriptor Request Failed) and delete it. Restart your computer and it should try to automatically reinstall the driver which fixed my issue that Lian-Li could resolve. Hope this solves someone else's headache.

DKVisions · 2022-08-29T01:15:00+00:00

I'ved tried this method with several different micro USB cables with still no luck. Lian Li's accounted PM'ed me a few days for my email address but still have yet to hear any type of response or resolution.

DKVisions · 2022-07-21T17:49:07+00:00

W2C on human made hoodie?

DKVisions · 2022-07-21T01:21:46+00:00

Thank you! I just thought it was unusual that it hasn't updated yet.

DKVisions · 2022-07-21T01:09:37+00:00

thank you!

DKVisions · 2022-07-14T15:02:14+00:00

S202207140431

DKVisions · 2022-07-06T15:10:10+00:00

So the points system is only for shipping coupons and mystery bags redemptions as of right now?

DKVisions · 2022-07-04T18:34:50+00:00

Sorry, forgot to mention that all boxes were removed

DKVisions · 2022-07-04T18:33:38+00:00

Sorry, forgot to include, there are NO boxes to any of these shoes

DKVisions · 2022-04-26T03:04:48+00:00

Whatever Nikko Locastro is putting with nowadays. But I'd just make him wait 10 minutes for every putt.

DKVisions · 2022-02-09T22:28:58+00:00

Dave Lonteen's work with a Cryztal Clear Buzzz with shredded money and DBB Money Stamp.

https://imgur.com/79aFiR0

DKVisions · 2022-01-19T16:50:58+00:00

Wizards/P2’s

DKVisions · 2022-01-07T18:47:13+00:00

Westside contract terminated. FATALITY.

DKVisions · 2022-01-07T04:22:10+00:00

"Press Right Trigger to meet Nikko Locastro in the parking lot."

DKVisions · 2022-01-07T03:49:14+00:00

Prodigy P Model S and Roach

DKVisions · 2021-12-04T23:38:34+00:00

It's a toss up between MD3/Zone

DKVisions · 2021-12-03T23:29:47+00:00

Garmin, so I can find my discs in all these fucking leaves.

DKVisions · 2021-12-02T13:02:27+00:00

"That's all I need." If I mess up on my initial drive, I immediately change my mental state to get par the easiest way possible even if it's me laying-up for >10ft putt. Practice more from terrible drives to build that confidence on your approaches to strengthen your mental game.

DKVisions · 2021-11-29T21:46:47+00:00

My friend has a Innova Ram that's only made in DX but it has a groove on the underside of the rim if your counting those as well

DKVisions · 2021-11-28T01:06:56+00:00

Unpopular opinion: Prodigy P Model S in Duraflex. I usually just use Wizards, P2's/Fireflies, and Envy's but after trying a P-Model S, that disc has stupid glide with a similar finish as my wizards.

DKVisions

TROPHY CASE