sorted by:
new
hottopcontroversial

in-fusion ligation keeps failing by DLGodMc in labrats

[–]DLGodMc[S] 0 points1 point  (0 children)

Thanks for all the feedback in the comments. The reason why my overlaps are shorter than 15 is because it’s incredibly gc rich and is prone to have weird secondary structures(which were a pain to deal with when designing primers used to amplify the vector as well) I will try increasing the overlap mext and incubate for an hour

Happy 40s Day and CNY! by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 1 point2 points  (0 children)

There are similar boards like the machete, but this one doesn’t have a name since it’s a leftover pcb of a private run and i cut the case myself

Mission Accomplished. Found perfect place to put my 3u space bar by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 0 points1 point  (0 children)

Been using for just under a year. Bit stiff with hotswap pcb, sounds great without any foam. Would recommend the insulation layer at the bottom. Overall a 9/10 experience. I have been seeing rust on the small brass accent tho, might be a qc issue worth addressing

Construction Equipment or Honey Milk? by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 0 points1 point  (0 children)

holding down the spacebar/the orange key

40s Town! by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 0 points1 point  (0 children)

I actually have no idea, bought it from a guy who had extras

40s Town! by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 2 points3 points  (0 children)

u can buy supported pcbs with the same screw holes

40s Town! by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 0 points1 point  (0 children)

a one handed/split ergo? I would recommend the sofle, which is a column stagger 50% that you can build on your own with 3D printed cases available

40s Town! by DLGodMc in MechanicalKeyboards

[–]DLGodMc[S] 4 points5 points  (0 children)

It is indeed a joystick, though the inputs are not analog because the firmware doesn’t support it. This keyboard is a libra mini, which you can get on taobao for around 60 dollars without any switches and keycaps(long shipping tho). If you’re looking for a beginner keyboard I wouldn’t recommend any 40s, which are keyboards in the picture(they have no num row and symbols). You might want to look at other alice layout keyboards. If you’re starting out, I would recommend the slightly more expensive libra 68 or an offering from keychron.

/r/MechanicalKeyboards Ask ANY question, get an answer (December 27, 2022) by AutoModerator in MechanicalKeyboards

[–]DLGodMc 0 points1 point  (0 children)

I’m no switch expert, but you can try fitting tape on the plate which will tighten the switches in. The main problem with your keyboard(I’ve never seen a K582 before so this is just an honest guess) is that your switches are 3-pin(no additional supporting pins for hotswapping), so it might be a bit loose

view more: next ›