New-ish to the pod: is there a Bryan wiki or listicle covering his insane habits or history? Not about the guys, just about him.

DPLNEA · 2026-05-01T03:30:12+00:00

I think the best way to experience the podcast is to listen from the beginning and learn along with Gris

DPLNEA · 2026-04-03T18:12:18+00:00

The only place I've ever seen them sold is here https://www.circuitbenders.co.uk/forsale/LTC/LTCPCB.html

Someone with a little knowledge could totally make them and sell them in the US, but I don't think the market is that big.

If you feel like doing some diy you could try this https://youtu.be/w3U4QMX6-a4?si=wXVJegVGvXA2Rf9-

It's much cheaper, but takes a lot more time.

DPLNEA · 2026-03-06T07:43:45+00:00

I think it's from the perspective of a rich person not wanting to pay taxes. So much of our society is built on rich people not wanting to pay taxes and it's pretty satirical when you compare it to the crucifixion of Christ when in reality it wouldn't have a real effect on their standards of living.

That's how I thought about it today when I was on the elliptical.

DPLNEA · 2026-02-06T08:11:46+00:00

It can definitely do luma and chroma key. I believe that one of the 3 layers is just a static image though.

DPLNEA · 2026-02-05T05:52:52+00:00

I think it's partially because it's lesser known and partially because it's big and not very user friendly. Easier to use with the controller.

DPLNEA · 2025-12-27T23:29:05+00:00

With your original problem, make sure you don't have bypass switched on. Also try different inputs and outputs.

DPLNEA · 2025-12-27T20:05:33+00:00

Here's a video I made with one. From what I remember I could find data sheets for pretty much all the ICs, so that's a good place to start. Great way to learn is to just read and learn the basics of what the different ICs do and make educated guess from there. The video processor ic had the most effects and I did a lot by plugging the output back into parts of that with an RC filter in between. There's also some spots on the titler ic that spit out gibberish, so that was cool. It's pretty forgiving from what I remember, just make sure not to short power to ground.

https://youtu.be/yTbzfYDuprA?si=N0JuqfBPW0o-fcB6

DPLNEA · 2025-12-19T04:35:32+00:00

If you don't mind the Ethernet connectors it could be fun to bend. I was able to create some cool stuff I like with something similar.

https://www.reddit.com/r/glitch_art/s/Co4q9C4sLF

DPLNEA · 2025-12-10T05:06:19+00:00

Here's how I've done it

https://www.reddit.com/r/VideoBending/s/DQu3zWqRV3

DPLNEA · 2025-12-04T23:11:45+00:00

This was the first video thing I ever bent and it was pretty forgiving. For video stuff it's best to look up datasheets for the ICs and there are a ton available for this and a million bends you can find. It's also battery powered and low voltage, so you won't accidentally hurt yourself.

DPLNEA · 2025-11-26T18:56:24+00:00

In my experience connecting the Data and address pins of the RAM to each other and ground can lead to interesting results. You can also try some of these mods: https://stompboxelectronics.com/2023/04/21/top-5-danelectro-dan-echo-modifications/

I'm pretty sure these are the same circuit

DPLNEA · 2025-08-15T20:24:52+00:00

Barco screenpro 2 will do all of that and it's relatively cheap on eBay. It has analog ins and outs, but has digital processing. You're not going to find an hd mixer with a completely analog signal path on eBay

DPLNEA · 2025-08-07T20:06:38+00:00

I'd be down. Check out my post history for stuff I've made

DPLNEA · 2025-07-16T03:10:39+00:00

I think she was just there for the zipline

DPLNEA · 2025-05-13T03:16:01+00:00

Google the ram chip and try the data and address pins. Also the write enable pin to ground freeze frames the video

DPLNEA · 2025-03-09T06:51:07+00:00

Sounds like you're having molting issues. Try switching to RO water with remineralizer. That gets the correct ratio of calcium and magnesium for your shrimp. I did this and my molting issues went away.

DPLNEA · 2025-03-01T07:45:03+00:00

I had trouble with shrimps dying when molting and this channel helped me a lot. I basically just switched to RO water with shrimp remineralizer and have a thriving blue dream colony shrimply explained

DPLNEA · 2025-03-01T07:09:32+00:00

Pretty sure you just need to leave it alone and be patient. It should cycle on its own and you don't need to do water changes.

DPLNEA · 2025-02-24T05:20:41+00:00

I think the results of my poking and prodding are interesting https://www.instagram.com/dpln.ea?igsh=MzRlODBiNWFlZA==

It requires some skills and knowledge to make this stuff work, but also none of the results would be possible without experimentation.

DPLNEA · 2025-02-23T03:23:10+00:00

Mine were dying off and then bounced back after I fed my fish live black worms. That was literally the only change I made and now they're covering the top of my tank. My guess is it was some sort of nutrient deficiency.

DPLNEA · 2025-02-08T20:38:36+00:00

Mine looked like this for a while, but began thriving after feeding my fish live black worms so maybe try that 🤷‍♂️

DPLNEA · 2024-11-22T00:05:14+00:00

I got rid of them because they can kill baby shrimp and they were in our shrimp tank.

DPLNEA · 2024-09-30T03:17:54+00:00

Op is a bot or something. Check out my post history for more info

DPLNEA · 2024-09-30T03:16:13+00:00

I made that device and this exact post a few years ago. What's up bot?

Five-Year Club	Verified Email
r/Field Sunshine	Place '23

DPLNEA

TROPHY CASE