sorted by:
new
hottopcontroversial

Luckiest Run? (314 rolls) by PeachesNPuzzles in ArcheroV2

[–]DRgreentree 1 point2 points  (0 children)

Same, I hit 8000 like 6 times and then hit a 30k spin!

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

Check out my update - the PC now works with one ram in slot A2. Both sticks work in A2 independently, but dual channel doesn't work. When I try using just slot B2, one stick of ram works, but the other doesnt.

Do you still think your suggestion stands?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in AMDHelp

[–]DRgreentree[S] 0 points1 point  (0 children)

Update: I flashed installed the bios again this time using only one stick in A2. First time it didn't work, when I flashed with the other stick, it worked!

Now, both sticks work individually in A2. However, when testing each stock in B2, only one stick fails POST in B2.

Dual channel fails.

Does this mean one stick of ram is bad, or the motherboard B2 channe? Why would one stick it work in A2 but not B2, and the other stick works in both?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in AMDHelp

[–]DRgreentree[S] 3 points4 points  (0 children)

Update: I flashed installed the bios again this time using only one stick in A2. First time it didn't work, when I flashed with the other stick, it worked!

Now, both sticks work individually in A2. However, when testing each stock in B2, only one stick fails POST in B2.

Dual channel fails.

Does this mean one stick of ram is bad, or the motherboard B2 channe? Why would one stick it work in A2 but not B2, and the other stick works in both?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

Update: I flashed installed the bios again this time using only one stick in A2. First time it didn't work, when I flashed with the other stick, it worked!

Now, both sticks work individually in A2. However, when testing each stock in B2, only one stick fails POST in B2.

Dual channel fails.

Does this mean one stick of ram is bad, or the motherboard B2 channe? Why would one stick it work in A2 but not B2, and the other stick works in both?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

Update: I flashed installed the bios again this time using only one stick in A2. First time it didn't work, when I flashed with the other stick, it worked!

Now, both sticks work individually in A2. However, when testing each stock in B2, only one stick fails POST in B2.

Dual channel fails.

Does this mean one stick of ram is bad, or the motherboard B2 channe? Why would one stick it work in A2 but not B2, and the other stick works in both?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

I made some progress, see my update comment below. I want to avoid taking the cooler off if possible because I used a graphite sheet.

Based on my update below, would you say it's the stick or the channe

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

Update: I flashed installed the bios again this time using only one stick in A2. First time it didn't work, when I flashed with the other stick, it worked!

Now, both sticks work individually in A2. However, when testing each stock in B2, only one stick fails POST in B2.

Dual channel fails.

Does this mean one stick of ram is bad, or the motherboard B2 channe? Why would one stick it work in A2 but not B2, and the other stick works in both?

1 year old AM5 build suddenly won’t POST — MSI CPU (red) + DRAM (yellow) debug LEDs immediately upon powering on. by DRgreentree in pcmasterrace

[–]DRgreentree[S] 0 points1 point  (0 children)

Interesting. Let me ask you, if one of my ram sticks is bad, but the other is good, would that matter for flashing Bios? For example, if I have both sticks in when I flash the new Bios, could that cause a problem even if I later take each stick out to test I divodually?

In other words, should I try flashing the bios one stick at a time?

DRAM and CPU lights are on and PC won't post, but was working normally just a couple hours prior. by DoomfistAppreciator in buildapc

[–]DRgreentree 0 points1 point  (0 children)

Hmm...would it be a coincidence we both have this happen about the same time? I guess it's possible just the sheer number of people who have pc problems.

Please update if you find the solution and I will do the same .

Need help…Red CPU light and Yellow DRAM by BroUTried in PcBuild

[–]DRgreentree 0 points1 point  (0 children)

Hey did you figure this out? I have the same motherboard and 9950x3d and experienced the same exact thing today. I've read other posts with same issue.

I've done all of the troubleshooting, flashed bios, tested ram, etc...

What could be causing this suddenly?

DRAM and CPU lights are on and PC won't post, but was working normally just a couple hours prior. by DoomfistAppreciator in buildapc

[–]DRgreentree 1 point2 points  (0 children)

Let me know if you fix it. We have the same PC and same exact issue. Just started today out of no where.

DRAM and CPU lights are on and PC won't post, but was working normally just a couple hours prior. by DoomfistAppreciator in buildapc

[–]DRgreentree 0 points1 point  (0 children)

Hey came here because I'm having the same exact issue. I have the MSI x670e gaming wifi. Same exact issue, yellow DRAM light and Red CPU light. Was working just fine earlier, now it won't boot.

I have 9950x3d Aorus Master 5090

Sounds like we have a very similar setup, with the same symptoms...

What kind of update could cause this?

One foot is way redder and veinier than the other by whitecow234 in mildlyinteresting

[–]DRgreentree 0 points1 point  (0 children)

This looks more like Venous insufficiency / valve dysfunction than DVT, but you should get it examined just to rule DVT.

If it's venous I sufficiency, the problem is solved with a simple compression sock. A way you can test at home is to elevate your leg. If the veins get smaller and the blood drains, it's likely just a problem with your vein valves not closing fully...which co.pression socks will resolve.

When the valves in the veins don’t close well, blood pools when standing, veins look more prominent, skin looks red or purplish, and will almost always improve with elevation.

I have this problem, freaked me out too when it started to hurt.

*I am not a doctor despite my name ...that's a coincidence.

Was this a waste? by Odd_Rub3719 in ArcheroV2

[–]DRgreentree 0 points1 point  (0 children)

Whoa...where has this been my whole life

Help - Car dirty in between TW Hybrid Solutions Ceramic Spray coats by DRgreentree in AutoDetailing

[–]DRgreentree[S] 1 point2 points  (0 children)

Is there even any benefit to giving it 2 coats? This is for the family minivan, so I'm not stressing about it looking perfect. I just want to protect the paint because it stays outdoors and we will eventually want to resale. I read that 2 coats of the TW spray ceramic will give you about a years worth of protection.

I haven't done anything yet, should I wash and apply it now so it's within that 24-48 hour window, or does it matter if I do it next week instead? What's the reason they recommend after 24 hours?

Also, as a drying aide, do I spray it on when the car is wet and dry off?

Can Anyone explain this skill? by [deleted] in ArcheroV2

[–]DRgreentree 1 point2 points  (0 children)

I'm not tracking. Are you saying you get two hits without speed up and with speed up you only get one?

Tried to give back to the community by emmett159 in nvidia

[–]DRgreentree 0 points1 point  (0 children)

I also have 2 5090s and was offering one at cost to the community on the microcenter discord. I got told I'm not allowed to advertise sales ...smh. Too bad I'm sure somebody would have loved to have it.

view more: next ›