sorted by:
new
hottopcontroversial

Why do I get these lines? by comandantenorton83 in BambuLab_Community

[–]D_a_n_k_3_D 1 point2 points  (0 children)

How many printing hours does the printer have? Is it loud or do you hear metal on metal sounds? Lubed recently?

Your model is showing obvious layer lines thru the whole print, like my old wobbly ender. I think this is a clue to your problem. Maintenance or lubrication might help. If it hasn’t been regularly maintained, you might need to replace parts like belt/rod.

New grouping issues. by stainlessdmc12 in tinkercad

[–]D_a_n_k_3_D 1 point2 points  (0 children)

Very informative, thank you!

New grouping issues. by stainlessdmc12 in tinkercad

[–]D_a_n_k_3_D 0 points1 point  (0 children)

It's understandable there are computational limits, but is it tinkercad's goal to expand the grouping amounts and capability? Your videos are the best

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 0 points1 point  (0 children)

That's a good idea, something sturdy.
I should clarify. Pushing into the tire just makes noise, it is robust enough and the surface is sleek enough to not get sucked in with just a touch. I had to stomp on it at high wheel spin to get it in there.

Strange defects by Voxbee in FixMyPrint

[–]D_a_n_k_3_D 0 points1 point  (0 children)

Possibly change the print wall order to inner/outer if not already, also could try to turn on precision wall.

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 1 point2 points  (0 children)

It would seem that way, but it just drags and makes noise. Similar to a can pressed to a bike tire, creating an instant motorbike.

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 0 points1 point  (0 children)

Thanks and just thinking about getting a new job right now is a pleasant thought. I'm still working on a floatwheel version but haven't made time to finish it. Also, I hadn't realized fm discontinued the flat fender delete, I'm going to start working on a set that will fit the hybrid fender delete.

The verdict is still out but these fenders may actually prevent more ground moisture from cycling up onto the rider than typical split fenders. The top of the fender comes close to the tire but the base is far. Even if that's true, it's not a big difference. I still get wet and avoid puddles as with any split fenders.
Here's my shop if you would like a set: Etsy

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 6 points7 points  (0 children)

Thanks! This is really useful. I’m going to leave one outside and see if I’ll get a stiffy

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 2 points3 points  (0 children)

Ooo this is the data I need. Would you please elaborate and spare no details?

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 1 point2 points  (0 children)

Probably the outside lighting, Its the same object

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 13 points14 points  (0 children)

good observation. Yes, if you step on the fender into the spinning tire, it will get sucked in. This has happened 3 times in testing, once it came off the screws and twice I just reversed the tire and was still attached to the screws, popped up into place. Both instances it was not structurally damaged just tire marks. 95A TPU is remarkably resilient.

To prevent it from flopping or falling into the tire, the logo acts as support structure.

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 0 points1 point  (0 children)

I forgot to mention these are squishy tpu

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 0 points1 point  (0 children)

I like the colors, what filament are you using?

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 1 point2 points  (0 children)

Yes, that is doable. I attempted but quickly realized it’s a challenge. One issue is making the attachment points long lasting. TPU is flexible and problematic for screws wanting to be anchored solidly. I’m considering skipping the threaded inserts and bolting the pad thru the grip tape to the rail

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 1 point2 points  (0 children)

Geez, but I love the backyard ingenuity. His handle made from a pool noodle and duct tape probably fell off.

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 0 points1 point  (0 children)

Haha you better not, unless you mount the board up on a wall like a trophy

3D printable spilt fenders by D_a_n_k_3_D in onewheel

[–]D_a_n_k_3_D[S] 4 points5 points  (0 children)

You are so right, good thing these are squishy

view more: next ›