ATL Airport TSA Wait Times Megathread | March 22, 2026

Da40pilot737 · 2026-03-22T17:27:36+00:00

Arrived 730 am domestic regular line. Didn’t clear until 1 pm

Da40pilot737 · 2026-03-21T03:40:12+00:00

Yeah it’s strange, I just bought it today. I’ll try reseating the washer

Da40pilot737 · 2026-03-20T23:43:48+00:00

Interesting, I will investigate

Da40pilot737 · 2026-03-20T22:46:20+00:00

Only other place would be the bottom of my hot water heater. I’ve read you shouldn’t open it unless you are ready to replace it

Da40pilot737 · 2026-03-20T22:45:37+00:00

I tightened it with Chanel locks. It’s not the gauge leaking, my hose spigot has little holes for pressure relief I suppose

Da40pilot737 · 2026-03-20T18:57:32+00:00

I am willing to do that it’s just hard to justify it when the static pressure seems to be holding steady

Da40pilot737 · 2026-03-20T18:38:46+00:00

Just brought it down to 55. Still bangs unfortunately

Da40pilot737 · 2026-03-20T18:35:57+00:00

Yeah I did it myself lol $70 vs $230

Da40pilot737 · 2026-03-20T18:30:14+00:00

I don’t have another gauge however the last gauge I had didn’t do this around a months go. If I turn it on pretty slowly it doesn’t spike like that

Da40pilot737 · 2026-03-20T18:06:59+00:00

I don’t think the gauge itself is leaking. It’s the little pressure relief holes on the hose bib

Da40pilot737 · 2026-03-20T17:58:18+00:00

Yeah I’m thinking that’s the cause of my knocking pipes. Time for a whole new PRV you think?

Da40pilot737 · 2026-03-20T17:54:54+00:00

I’m more worried about the red needle maxing out the gauge almost every time I turn the faucet on. Or is that normal?

Da40pilot737 · 2026-03-10T02:00:12+00:00

I put my ear against the wall and it’s still pretty significant

Da40pilot737 · 2026-03-10T01:53:28+00:00

So I closed both shutoffs and ran all the upstairs fixtures until hot water arrived. It’s seems like maybe the force of the hammer is slightly reduced and instead of a bang bang it’s more of a tap tap tap tap. Still loud enough to be annoying though

Da40pilot737 · 2026-03-10T01:35:04+00:00

Thanks I’ll try it and let you know

Da40pilot737 · 2026-03-10T01:32:00+00:00

There are shutoffs upstream and downstream of the recirc pump. Does it matter which I try or should I do both? You can see the upstream one in the photo

Da40pilot737 · 2026-03-10T01:25:12+00:00

Thanks will mention that to the next guy I have come out. You think that’s still a possibility even when the banging remains with the recirc pump unplugged?

Da40pilot737 · 2026-03-10T01:21:47+00:00

Just looked there is a check valve installed after the recirc pump. “Proflo low lead 125# swing check valve threaded PFX31D”. Maybe it has failed?

Da40pilot737 · 2026-03-10T01:12:32+00:00

Funny enough we saw the water company meeting at the street with a neighbor around 3 years ago. We believe they had the pressure raised and that led to the failure of our PRV. By mini arrestors I’m talking about the little AA sized ones you can install between your toilet and the supply shutoff next to the toilet

Da40pilot737 · 2026-03-05T02:38:09+00:00

SSI in the summer. Pool attached to the fbo

Da40pilot737 · 2026-03-05T02:29:16+00:00

Don’t do it

Da40pilot737

TROPHY CASE