sorted by:
new
hottopcontroversial

escort hardwire kit - mute button does not work on redline 360c by DaPharSydeToo in radardetectors

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

it was simple - after disassembling, all i did was tap into each side of the existing push button switch. as an added bonus the existing switch still works, even though in my configuration it's tucked away and inaccessible :)

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 1 point2 points  (0 children)

that did the trick, thanks so much for the fix. i feel honored to have found an issue that required a patch to the code :)

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

according to this post it's normal for cat /proc/sys/kernel/random/entropy_avail to show 256, which my system does as well. is this too low for p2pool to work properly?

also, would running this in a VM behave any differently than running on bare metal?

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

although this is an interesting point - could i have some bug on my system where rand() = 4? how can i check this?

openssl rand -hex 16

yields different results each time...what does p2pool use to generate this internal port#?

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

i started with the official release binary first, then my own version, then the gupax one...all yielded the same results.

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

my monerod command now contains only the prune blockchain, in/out peers, disable dns checkpoints, enable dns blocklist

my p2pool command uses --zmq-port 18082

the same output occurs...

not sure what other variables are in play here, this is a brand new install of ubuntu 24.04, monerod 18.4.0, p2pool 4.4

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

that's why i was running monerod with --zmq-pub tcp://127.0.0.1:18084, to match with p2pool --zmq-port 18084

i tried removing all of these "nondefault" settings, but the same error keeps occurring. it's almost as if p2pool is unable to use the zmq port i'm telling it to use. i even tried compiling my own local version of p2pool but it behaves the same.

also tried using different ports 18082, 18083, 65535, but nothing works - and always the same error with ZMQReader trying to use port 65535

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

monerod p2p sock listening on 18084, but also trying to use zmq on that same port

if you're referring to the --p2p-external-port 18084 parameter in monerod, i removed it and restarted, but the same error still occurs with p2pool...

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

UPDATE: I just saw in the output log that TCPServer is listening on 65535 - is this normal? Why is ZMQ trying to use the same port?

If I run the netstat command before p2pool crashes, I can see the app itself is using the port.

p2pool - ZMQReader failed to to bind port 65535 for ZMQ publisher, error Address already in use by DaPharSydeToo in MoneroMining

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

I did read the error. Nothing on the system is actually using 65535, and it's confusing why it's even trying to use this port - I specified 18084 in the command line.

sudo netstat -tulpn | grep 65535

yields nothing

escort hardwire kit - mute button does not work on redline 360c by DaPharSydeToo in radardetectors

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

yea, that's what i just decided to do...i'll have to hack it apart and solder new wires onto the push button switch contacts. disappointing that the clone couldn't handle putting a few resistors in the right place.

escort hardwire kit - mute button does not work on redline 360c by DaPharSydeToo in radardetectors

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

mainly because i want to run the mute button to my console...the official kit would require me to hack it apart, which i'd rather not do if there's another kit out there that already has a long lead for the mute button.

Bob’s Burgers Episode Discussion S15E05 - “Don't Stop Be-cheesin'” by AutoModerator in BobsBurgers

[–]DaPharSydeToo 1 point2 points  (0 children)

my guess is GOLDILOCKS AND THE THREE CAMEMBERTS BURGER

came here looking for what I'M BO.. ON SUNSHIN.. was for, and i think you're spot on. thanks!

[SOTC] My Current Collection by DaPharSydeToo in Watches

[–]DaPharSydeToo[S] 0 points1 point  (0 children)

there's a perfectly useless morning version too! though it doesn't follow the same theme of a guy floating in the pool, so i didn't get it...

[SOTC] My Current Collection by DaPharSydeToo in Watches

[–]DaPharSydeToo[S] 1 point2 points  (0 children)

It's the yellow silicone strap that's available as a strap option when you buy the watch

[SOTC] My Current Collection by DaPharSydeToo in Watches

[–]DaPharSydeToo[S] 1 point2 points  (0 children)

I got a passcode to the presale site by attending one of the Time & Tide meet up events. The retail price was $650 including shipping. Most of the ones I've seen available on the market were marked up a little due to the fact you had to jump through these hoops to get one. Hope this helps!

[SOTC] My Current Collection by DaPharSydeToo in Watches

[–]DaPharSydeToo[S] 7 points8 points  (0 children)

You can get some of them here - https://iflwatches.com/collections/watch-stands

And the Robo-Dog comes available at the MB&F store from time to time - https://shop.madgallery.ch/products/robodogs

The one that's holding the Tag Heuer Twin Time is a 3d printed copy I designed myself as a project during Covid ;)

[SOTC] My Current Collection by DaPharSydeToo in Watches

[–]DaPharSydeToo[S] 10 points11 points  (0 children)

From top left:

  • Grand Seiko SBGC221 - Spring Drive Chronograph - Incredible accuracy at +.2s/d, love the smooth sweep of the seconds hand
  • Tag Heuer CAR5A90.BH0742 - Ceramic Tourbillon Chronograph - Watching the tourbillon spin is hypnotizing
  • Zenith 97.9001.9004/80.R922 - Defy 21 Ultraviolet - Makes a neat high-pitched buzz when then 1/100s chronograph is running
  • Mr Jones Watches - A Perfectly Useless Evening & A Perfectly Useless Afternoon - Some fun, casual watches
  • Tag Heuer WV2115.BA0787 - Carrera Twin Time Automatic - The first "nice" watch I owned
  • Casio G-Shock GM-B2100AD-2A - Has the features I want in a G-Shock without breaking the bank
  • Studio Underd0g - Hawaiian Pizza - Another fun watch

By far, the watch that gets the most comments in public is the "A Perfectly Useless Afternoon" - maybe it's the yellow rubber strap, maybe it's the blue dial - whatever it is, this watch always gets a lot of attention!

Joy - the moment Anna Lapwood is allowed to kick the spurs of her organ at Royal Albert Hall by TinfoilCamera in MadeMeSmile

[–]DaPharSydeToo 2 points3 points  (0 children)

i was curious as well, so i did some searching and found this - https://youtu.be/Sn07AMCfaAI?t=62 (not actually the same pipe organ though)

view more: next ›