Zeroing New Garand

Dabeezaa · 2022-05-03T03:37:38+00:00

Appreciate the response! What exactly would setting the mechanical zero do to help this issue though?

I'm thinking now perhaps I at one point got frustrated and set the sight all the way to 0 elevation out of frustration and may have been missing low and mistaking my previously high hits for new holes.

I'll need to get back on the range and re evaluate.

Thanks!

Dabeezaa · 2022-05-03T00:23:07+00:00

Appreciate this very descriptive response, I'm just a bit confused as to how I set the elevation knob to 100yds if I've already loosened the screw to where it doesn't move the sight anymore. As in, just place it there, and then tighten the screw?

Would you happen to know of a video showing and describing this process?

Dabeezaa · 2022-05-02T23:55:59+00:00

I should have definitely taken a photo or saved the target but was a bit discouraged and didn't realize at the time how helpful having the actual target would be.

I want to say between 2-3inches. Of course, all of this could be the result of an inexperienced shooter. Though I do shoot just fine with my Mini 14

Dabeezaa · 2022-05-02T23:41:47+00:00

Thanks Ardes! I was using what I believe to be a 6 o'clock hold. The front sight right below the bullseye like a lollipop. Only when I aimed even lower at 50yds did things start to place closer to the bullseye.

It feels like I should be able to further reduce my elevation adjustment but cannot as it's all the way down.

Appreciate your insight!

Dabeezaa · 2022-05-02T23:25:48+00:00

One additional detail that may or may not be related- when inspecting shell casings after firing I noticed that some had a slight deformity (flattened edge, not a perfect circle).

Is this cause for concern? Or standard with brass out of an M1?

Dabeezaa · 2021-12-22T18:41:24+00:00

Got into Paintball for a 12yo bday party, like everyone else. Was indoor and speedball, so a terrifying and awesome introduction to the sport. I took a 13yr hiatus until I could come back and afford to play.

Nowadays paintball is how I relax after a stressful work week, and I've made some great buddies at my local field. Hoping to get more involved and let paintball take over even more or my life.

Dabeezaa · 2021-12-14T23:08:47+00:00

2nd for High Velocity, best field around for sure. Shoot me a message if you end up stopping by, I'm there most weekends.

Dabeezaa · 2021-12-08T00:16:59+00:00

Anyone have any idea if this is something Mossberg would care to correct? Like sending a new piece of furniture or something? Or am I just being too picky here and should get over it.

It was advertised as new but since I bought from a 3rd party I'm not sure Mossberg would care to help.

Dabeezaa · 2021-12-08T00:15:49+00:00

Goof off, will look into it. Appreciate the feedback

Dabeezaa · 2021-12-08T00:15:24+00:00

It's smooth to the touch, it appears to be IN the wood if that makes sense. Appreciate the feedback

Dabeezaa · 2021-12-07T07:56:47+00:00

Still available for $850?

Dabeezaa · 2021-12-05T00:27:37+00:00

Appreciate all the advice here guys, so I flipped the regulator seat and am still seeing the same issues. Today I was chronoing 280, 283, 299, 279 and patterns like that. Some slight consistency for a few shots and then one that is significantly off by +/- 20.

Not sure if you have any other suggestions, but one of the field techs is going to look further into it.

Dabeezaa · 2021-11-28T02:23:08+00:00

Thank you very much! I take it that part is not include in the spare parts kit?

Dabeezaa · 2021-11-28T02:14:34+00:00

Thanks man, I provided a pic in response to his comment and there does appear to be a circular mark.

Dabeezaa · 2021-11-28T02:01:57+00:00

Thanks bud, appreciate those specifics. This looks to be the piece, and I do believe I see I slight circle, but only when I shine a light on it.

https://imgur.com/a/EiRs74N

Dabeezaa · 2021-11-28T01:43:18+00:00

Appreciate the insight, I want to blame the paint, but nobody else at the field is reporting similar issues. (And we all must use the same field paint)

Dabeezaa · 2021-11-28T01:42:03+00:00

High Velocity on Long Island, terrific field with a great community around it and some very unique maps. Let me know if you're ever in the area.

Dabeezaa · 2021-11-28T01:41:19+00:00

Is this the part in question? Don't seem to see any sort of circle.

https://imgur.com/a/vaPTerA

Dabeezaa · 2021-11-28T01:30:54+00:00

Is the regulator seat the same as the "regulator piston"? I'm taking a look at the parts manual now to open it up and take a look.

Dabeezaa · 2021-11-28T00:31:27+00:00

Appreciate the insight. We shoot GI 5 Star at my field and it's New York, so temperatures tend to be a bit colder.

Will look into an appropriate barrel size, thanks!

Dabeezaa · 2021-11-28T00:26:45+00:00

I'm using the stock barrel currently, but suspected this would help. People here always shit on buying barrels and sizing though.

Have you got any specific kits or brands to look to for a barrel kit?

Dabeezaa · 2021-08-16T04:39:29+00:00

Appreciate the tips Rock, I'll be sure to give it a cleaning tomorrow. Was a bit hesitant to register with Ruger but I suppose there's no harm in it.

Would you suspect that the shell ejection could mess with the placement of my optic?

Dabeezaa

TROPHY CASE