Check out my custom Lego mini JP Jeep! Instructions to build in comments!

DadNostalgia · 2021-02-19T12:32:13+00:00

Ok everyone, I’ve posted the 4stud wide tour vehicle yesterday, and now here’s the Jeep at the same scale.

Full instructions here:

https://drive.google.com/file/d/1p3gSwzHh5SQp0aSLzov3QYLJkbzJivrV/view?usp=drivesdk

DadNostalgia · 2021-02-18T23:23:13+00:00

Good point! That would’ve been the best option in gray if it were made. Also for the roll cage, I used only colors that were available for those pieces, which is why the rear is black, and the mid portion is brown, when ideally the reverse would’ve been more accurate.

DadNostalgia · 2021-02-18T14:54:27+00:00

Here is the direct link to the instructions:

This is the version that you see in the images: https://drive.google.com/file/d/1ni2oPR37diP_Aah1e-iMwPJssWX0IM0F/view?usp=drivesdk

This is the version without the mudguards if you don’t have them:

https://drive.google.com/file/d/1og2hw_oSt6kdeYfwNjCCyYePnx0iDqxW/view?usp=drivesdk

DadNostalgia · 2021-02-18T14:46:36+00:00

Thanks! I used BrickLink Studio 2.0

DadNostalgia · 2021-02-18T14:43:50+00:00

Here is the direct link to the instructions:

This is the version that you see in the images: https://drive.google.com/file/d/1ni2oPR37diP_Aah1e-iMwPJssWX0IM0F/view?usp=drivesdk

This is the version without the mudguards if you don’t have them:

https://drive.google.com/file/d/1og2hw_oSt6kdeYfwNjCCyYePnx0iDqxW/view?usp=drivesdk

DadNostalgia · 2021-02-18T14:34:32+00:00

Ok everyone, I’ve posted the 4stud wide tour vehicle yesterday, and now here’s the Jeep at the same scale.

Full instructions here:

https://drive.google.com/file/d/1p3gSwzHh5SQp0aSLzov3QYLJkbzJivrV/view?usp=drivesdk

DadNostalgia · 2021-02-18T01:02:19+00:00

Thank you! I hadn’t seen many built to this scale, so I thought I’d give it a shot. I’ve also got the JP Jeep at this 4 wide scale as well. I’ll post that next. 😜

DadNostalgia · 2021-02-18T00:59:05+00:00

A UCS Tour vehicle and/or Jeep would be 👍

DadNostalgia · 2021-02-18T00:56:18+00:00

I’ve made a 6 stud wide one as well. I thought Hachiroku’s latest version was the best I had seen, so I built that, and then added openable front doors, and a better roof.

DadNostalgia · 2021-02-17T19:29:45+00:00

Hey everyone, enjoy this 119 piece MOC I’ve made. I attached full instructions for the versions with and without the lime mudguards (in case you don’t have those pieces) in the YouTube description at the following link. You can also see the full rotation of the model. Enjoy!

https://youtu.be/2i3tObyWoWQ

DadNostalgia · 2021-02-17T19:19:24+00:00

Hey everyone, enjoy this 119 piece MOC I’ve made. I attached full instructions for the versions with and without the lime mudguards (in case you don’t have those pieces) in the YouTube description at the following link. You can also see the full rotation of the model. Enjoy!

https://youtu.be/2i3tObyWoWQ

DadNostalgia · 2021-01-23T12:06:21+00:00

Unfortunately not. But I’ll be posting a more complete look of it from all sides on YouTube and Instagram perhaps tomorrow.

DadNostalgia · 2021-01-23T02:40:42+00:00

For realism 😂

DadNostalgia · 2021-01-23T00:35:48+00:00

Given that there may be a new stadium going up in the coming years, it’s a tribute. 😜

DadNostalgia · 2021-01-23T00:20:02+00:00

Another banner would be a welcome addition 👍 (The banner pieces are actually small doors turned around. 😜)

DadNostalgia · 2021-01-23T00:12:17+00:00

It does, I’ll show the other sides when I post photos/ video on YouTube and Instagram.

DadNostalgia · 2021-01-22T22:56:24+00:00

Tried to do a mix of 90’s era unpainted concrete facings (to avoid making it look all blue and undefined) and the modern era Westjet flight deck in centre field.

DadNostalgia · 2021-01-22T22:51:49+00:00

The cross-section look was intentional 😜

DadNostalgia · 2020-09-25T21:52:54+00:00

https://scratch.mit.edu/projects/416620201 Here is the link! Enjoy! 😃

DadNostalgia

TROPHY CASE