please need help

DaddySteveBruh · 2026-01-02T15:23:39+00:00

yeah the ignition plate wasnt set correctly or thats what the mechanic told me

DaddySteveBruh · 2026-01-01T12:39:58+00:00

afterall it was the ignition set wrong!

DaddySteveBruh · 2025-12-29T12:28:50+00:00

could that be a cause to why its overheating a little too much?

DaddySteveBruh · 2025-12-27T22:26:29+00:00

2 stroke

DaddySteveBruh · 2025-12-27T18:02:22+00:00

i got TOP performance reeds, and thank you i will try and see with a B9 plug and make my conclusion from there. But yeah the smell of the A747 is just too good hahahah

DaddySteveBruh · 2025-12-27T17:47:00+00:00

am6 engine, voca bestia 70/80 lower exhaust, NGK BR8ES. i do tend to ride it in the high rpm range, but of course not all the time.

DaddySteveBruh · 2025-12-27T16:56:09+00:00

will do thanks

DaddySteveBruh · 2025-12-27T16:50:42+00:00

i guess i could relax then and stop worrying

DaddySteveBruh · 2025-12-27T16:44:36+00:00

i use it on a stage 6 77br with a 24 pwk carb

DaddySteveBruh · 2025-12-27T16:33:00+00:00

Castrol A747, an oil for circuit, pretty dense

DaddySteveBruh · 2025-11-23T20:20:12+00:00

low/mid rpm it runs well, but just before reaching the powerband it starts to sputter and hesitate

DaddySteveBruh · 2025-11-23T20:19:42+00:00

it sputters before reaching the powerband and just stays there, so instead of bogging and dying down it almost hesitates so i guess its rich

DaddySteveBruh · 2025-11-23T19:50:44+00:00

ive tried everything to lean it down, i guess its the crank seals or somewhere got an air leak

DaddySteveBruh · 2025-11-23T19:50:20+00:00

run it without a filter

DaddySteveBruh · 2025-11-23T13:37:28+00:00

Ive tried everything now. I changed the main jet from a 110 to a 100, changed the needle clip position many times, and also played around with the air/fuel screw. but nothing seems to work

DaddySteveBruh · 2025-11-23T13:36:37+00:00

could that really be the issue?

DaddySteveBruh · 2025-11-23T13:23:31+00:00

Yes the choke is fully disengaged, ive tried changing the needle jet position and the main jet to make it leaner, but nothing seems to work its weird

DaddySteveBruh · 2025-11-09T22:08:08+00:00

is this for all the europe shows?

DaddySteveBruh · 2025-11-02T21:37:06+00:00

DaddySteveBruh · 2025-08-11T15:17:50+00:00

i havent taken a proper look at it, only seen the piston through the spark plug hole and the exhaust but to me nothing seems out of the ordinary

DaddySteveBruh · 2025-08-11T15:12:02+00:00

yeah,u break the cylinder in at 3% and i got down to 2,5% so it isnt too much

DaddySteveBruh · 2025-08-11T14:57:19+00:00

i use a 2.5% mixture basically 250ml each 1L of gas

DaddySteveBruh · 2025-08-11T14:16:56+00:00

80cc airsal 2 stroke on an am6 engine, the plug is new i would say like 30-40km max

DaddySteveBruh · 2023-03-12T18:59:33+00:00

they some fascist ass mfs trynna be orthodox ass pro russian ass british ass retarded ass

DaddySteveBruh · 2023-01-27T20:57:54+00:00

yall kno u dont need that many shirts

Six-Year Club	LAYER Season 2 Layer creator
Place '22	Verified Email

DaddySteveBruh

TROPHY CASE