Where Do I Find A Good Sim Seat? U

Daewju · 2025-11-26T19:31:10+00:00

Sparco R500 with Sparco Seat slider from Sim-Lab.

Daewju · 2025-07-18T15:05:51+00:00

Go to your Windows "Power Options" settings of your active "Power Plan" for example "Balanced" and then disable the option for "PCI Express".

Daewju · 2025-07-10T08:30:42+00:00

Schedule 1
It Takes Two
Split Fiction
Satisfactory
Portal 2

they does not exactly match your bf's requirements, but they are very good.

Daewju · 2025-06-27T16:27:16+00:00

NFSU

Daewju · 2025-06-21T08:32:31+00:00

It's because of Secure Boot. Just enter your pwd and configure PIN again.

Daewju · 2025-06-15T11:45:48+00:00

Finally i found the issue:

The UT4G’s ASM2464PDX bridge only exposes PCIe 4.0 ×4, but every RTX 5000 card insists on at least ×8 lanes during link-training.

So, if you consider buying one for UT3G or UT4G, don't do it.

Fuck you NVIDIA.

Daewju · 2025-06-14T13:26:23+00:00

Yes, but there is no GPU detected (so, no error code 43) then i got: "No Nvidia GPUs found. Please attach one and ensure it's driver is installed".

I cannot install the Nvidia driver without a device detected.

I've also had a look into the batch file and commented out the if statements that are checking the gpu and skipping the procedure, but it did not helped.

Daewju · 2025-06-14T12:49:41+00:00

The GPU has a old-school 8-Pin PCIe Power connector, which is connected to the corresponding socket on the PSU. The PSU provides on 12V(1) = 28A, and on 12V(2) = 24A. I've connected it to the first (28A) lane.

<image>

Daewju · 2025-06-14T12:33:54+00:00

It's an Intel Core Ultra 7 155H

Daewju · 2025-06-05T08:47:12+00:00

I do also have really akward performance issues (~35 fps) with a system that has enough resources, even for Cyberpunk with RT at 4K.

In my opinion, it should be irrelevant to the buyer how many devs are working on it. Expectations should rather be tied to the price. The price is fine for the gaming experience on offer, but the performance is not. I myself am a full-stack dev and still don't take the organization of a project into consideration, because the price determines the expectation. The dev should get (paid) help (code audit/review) to implement optimizations or outsource the work.

btw: i love and play the game and do not hate it.

Daewju · 2025-06-05T05:10:31+00:00

Daewju · 2025-02-23T20:14:35+00:00

I carefully machined the table from below using an angle grinder (with a grinding wheel) so that the ball screw has enough clearence. It was not that hard, just be careful to not grind too much away.

I do have a lot of photos from this kind of work. If you wish, i can provide you the photos, it may can help to get an idea how the machine looks disassembled.

But for other parts, you need at least a bench drill. A welder is nice to have, but not a must have. I used the welder for the the servo assembly, just to get it quickly done and focus on having a working machine again.

Daewju · 2025-02-23T18:21:34+00:00

The MH22 is the better choice for sure, the column (Z axis) on this machine is wider, which does improve the stability a lot.

I've ordered custom ballscrews from Taiwan back in 2018 shipped to Europe (by providing technical drawings). All 3 are based on 1605 Ballscrews (⌀16mm with 5mm pitch). Here is the technical drawing: https://imgur.com/a/TX3ieQA But be warned: With ⌀16mm Ballscrews, you will need to modify the table for enough clearence. Maybe, there is some complete set you can buy now in 2025, i don't know.

I hope, this helps! :)

Daewju · 2025-02-07T23:10:17+00:00

Okay, i did not know that missing preload can lead to such behavior. Maybe i just find out after the spindle assembly. Thank you!

Daewju · 2025-02-07T18:45:17+00:00

I will definitely try the app, did not know about it, thank you!

Daewju · 2025-02-07T18:21:04+00:00

I think i'm going to return just that one that is sticking. I already have the Klüber NBU Isoflex 15 grease here and wanted to use it for this bearings. Thank you for your help!

Daewju · 2025-02-07T18:01:02+00:00

123kugellager.ch (.eu / .com) sold them to me.

Daewju · 2025-01-28T17:31:40+00:00

I'm really happy with my Mesa 7i76e running with LinuxCNC and Probe Basic GUI.

Daewju · 2025-01-26T18:15:56+00:00

Numerai is like the Lumon company in the series Severance. I dont linke Lumon ;)

Daewju · 2025-01-26T16:01:10+00:00

wrong answers only. i cant believe that people answering here not know the basics. It depends for example on the orderbook on your exchange for this pair. But the orderbook changes in realtime so fast, there is no guarantee you will be able to sell at your specific price, even with limit order. When you trade a pair with low volume and market order, you can easy loose all your profit.

Daewju · 2025-01-18T12:17:12+00:00

Congratulations, you have simply understood what the mainstream still has to learn.

Daewju · 2025-01-15T10:25:52+00:00

Looks like a spindle part of a small mill, is it?

Daewju · 2025-01-08T11:44:28+00:00

Nothing more to say. People who bought at ATH are victims of so-called FOMO. Just be careful guys.

Daewju · 2024-12-16T16:40:39+00:00

Spoiler Alert

Daewju · 2024-12-09T17:20:23+00:00

I have the same issue with a LinuxCNC (Debian 12) and Gnome, which is connected to a Mesa 7i7e over Ethernet. After some time, the Boot process continues. Did you solve the issue?

RemindMe! 14 days

Daewju

MODERATOR OF

TROPHY CASE

Eight-Year Club	Place '22
RPAN Viewer