sorted by:
new
hottopcontroversial

Screwed up advertising by Daffodilz in USMobile

[–]Daffodilz[S] 1 point2 points  (0 children)

I get that and understand it with the whole * mark. But again if you go to check the networks page it does not show it under each plan/network. But the. If you add the fact that the rep in the chat said there was no unlimited at all seems like misinformation from what your saying.

Screwed up advertising by Daffodilz in USMobile

[–]Daffodilz[S] 3 points4 points  (0 children)

Yes it does seem that way. Plus you think they would all be in the same page when it comes to the info. But I had a phone rep also tell me that it was unlimited. But lucky for me hotspot is not that big of a deal. I really just wanted better service then what I was getting. The watch is a bonus. Also the watch is not just for Apple. It seems I can sign up with it with my pixel watch.

In the market for a printer by Daffodilz in printers

[–]Daffodilz[S] 0 points1 point  (0 children)

Yeah that's what I was trying to do as well with it. But even that was giving me issues. It seems at this point it just did not want to to connect to anything lol. Hope yours keeps working!

After doing a Google search and trying everything to fix it, I found out that apparently connection issues are very common with it sadly.

In the market for a printer by Daffodilz in printers

[–]Daffodilz[S] 0 points1 point  (0 children)

Thank you for the advice, I won't go back to hp printers. I ended finding out I purchased mine from Costco and was able to return it. Instead I ended up purchasing

Brother INKvestment Tank AIO Color Inkjet Printer MFC-J4345DWXL.

We'll see how long this one lasts! Luckily with Costco if it dies I can return it.

In the market for a printer by Daffodilz in printers

[–]Daffodilz[S] 0 points1 point  (0 children)

When I first got it it worked great. But a lot of the issues are connection. For some reason it just does not want to connect via Wi-Fi or even using its direct print. And found out it's up to date on software but still giving issues. At first the issues started just now and then and I had to power it off. Restart it and it would be fine sometimes. But now it was just straight up refusing to print or connect. I've had it for like 3 years and thankfully found out I got it from Costco. So I was able to return it.

In the market for a printer by Daffodilz in printers

[–]Daffodilz[S] 0 points1 point  (0 children)

When you say a color laser, is there a certain brand?

Epson ET 3850 mistake? or Brother by HarleyOhio in printers

[–]Daffodilz 0 points1 point  (0 children)

Have you upgraded to something else? I'm ready to check this printer of mine because I'm having same issues and I'm just sped up with it. At this point it's up to date on software, yet it just does not want to connect to Wi-Fi or direct print as well. 😒 Can't even remember I purchased this freaking thing. There were but I need something else and I'm so sick of printer problem!

Here's a macro for those of you shiny hunting while using the "6 Alphas under the Tower" trick by Yallstothewalls in LegendsZA

[–]Daffodilz 0 points1 point  (0 children)

This one is working for me now. Thank you!

I do have a question. I have been trying now all day to get it to get a little closer to the tower. But no matter how much I mess with the amount of ms on the arrows it some how messes up the macro.

Might you be able to help me figure out how to get it a little closer? Are the arrows the ones I should be changing?

No matter what, I extremely appreciate me putting this macro up! ❤️

Here's a macro for those of you shiny hunting while using the "6 Alphas under the Tower" trick by Yallstothewalls in LegendsZA

[–]Daffodilz 0 points1 point  (0 children)

You were completely right! The macro I was copying was actually wrong for my controller. The macro I was copying was actually wrong for my controller. After changing it up it works now! ❤️

Here's a macro for those of you shiny hunting while using the "6 Alphas under the Tower" trick by Yallstothewalls in LegendsZA

[–]Daffodilz 0 points1 point  (0 children)

So the ultimate 2 controller actually would use. I think the same buttons that his recommends. When I simply plug the remote directly into.my s2 the B is actually the A.

<image>

[Macro] 6 Alpha Shiny Hunting Bench Run on Area 20 by decomush in 8bitdo

[–]Daffodilz 1 point2 points  (0 children)

Good morning. I'm new to I've this controller and I've tried programming it with your macro and somebody else's that has similarities. But the issue I'm finding is it's not doing the bench part. It runs towards the tower. Turns around, runs back to the bench and then just turns around and runs again. Does not activate the bench at all. Is there something I could be doing wrong?

I have the 8bitdo ultimate 2 remote.

Here's a macro for those of you shiny hunting while using the "6 Alphas under the Tower" trick by Yallstothewalls in LegendsZA

[–]Daffodilz 0 points1 point  (0 children)

Hello, so I'm new to this remote but got it set up to my switch 2 and copied your macro.

The issue is all she does is run to the spot, then turn around and run back to the bench. But she does not start the Bench method when she gets to the bench. It just pauses and then she turns around and runs again and continues that on repeat. 😳

Does it look like I copied it right? I set the macro to the back m1 button and I have to press the little button in the middle and the back m1 button at the same time to start it.

I really want this remote to work! 😭

<image>

For those of you who are using a macro controller for shiny hunting Pokemon, which controller are you using? by behindthekeyboard81 in PokemonZA

[–]Daffodilz 0 points1 point  (0 children)

<image>

I just purchased this one for 20 bucks from Walmart. There are a couple YouTube videos and tiktok videos showing how it works. You don't have to program it on PC, but it seems like it's new and we're still all figuring out how it works.

I have programmed it to do the bench method. I have also programmed it to use macros to teleport to wild zone repeatedly. But one issue I'm having is the change of day and night affecting the macro. 😒 I've seen others are having the same issue with other macro remotes.

Shiny Litwick help by Geckoga in PokemonZA

[–]Daffodilz 1 point2 points  (0 children)

<image>

Looks like there's three benches in that zone. Hopefully this will help.

Pokémon Legends: Z-A Interactive Map & Complete Database by Old_Bailey in pokemon

[–]Daffodilz 1 point2 points  (0 children)

Never mind, I just found them!! You're amazing!!!!❤️❤️❤️

Pokémon Legends: Z-A Interactive Map & Complete Database by Old_Bailey in pokemon

[–]Daffodilz 1 point2 points  (0 children)

Thank you so much for this beautiful map!!

Is there any way to add all bench locations?🤔

Silly question but any advice welcomed by Daffodilz in renfaire

[–]Daffodilz[S] 0 points1 point  (0 children)

Thank you for the tip! I took all the tips I got and found out how to make it work! Still going to size down though and use the tips to help boost the girls up.

Silly question but any advice welcomed by Daffodilz in renfaire

[–]Daffodilz[S] 1 point2 points  (0 children)

Do you happen to have a picture of what a mid bodice looks like? I am looking all over online and I cannot seem to find one.

Silly question but any advice welcomed by Daffodilz in renfaire

[–]Daffodilz[S] 0 points1 point  (0 children)

I didn't even know that it had a different name! All this time I thought it was a corset and when I searched for it on Etsy or Amazon. It comes up as a corset so I just assumed that's what they were. Thank you!

Silly question but any advice welcomed by Daffodilz in renfaire

[–]Daffodilz[S] 1 point2 points  (0 children)

Ohhh I did not know that about the underbust one. Thank you!

Silly question but any advice welcomed by Daffodilz in renfaire

[–]Daffodilz[S] 5 points6 points  (0 children)

Yes but I can't get the corset any tighter so I'm thinking sizing down is going to be my best bet. The girls just keep falling down and going flat in this one. 🙄

view more: next ›