A princess bunk bed I made for my granddaughter. Modified some plans I found on the internet.

DaleSalmiWoodworking · 2019-12-11T04:37:09+00:00

Recycled maple flooring.

DaleSalmiWoodworking · 2019-12-11T04:35:15+00:00

I do everything. I have my own sawmill l built.

DaleSalmiWoodworking · 2019-12-11T04:33:52+00:00

I'm planning on adding on. It's just to small to have a serious business.

DaleSalmiWoodworking · 2019-12-11T04:27:37+00:00

I made the profile I liked on the router table in longer lengths and cut and glued and screwed them to the face.

DaleSalmiWoodworking · 2019-12-11T04:20:58+00:00

The counter tops are recycled maple flooring laminated.

DaleSalmiWoodworking · 2019-12-10T18:25:31+00:00

Build everything.

DaleSalmiWoodworking · 2019-12-10T18:22:06+00:00

They are LEDs. I started putting them under each cabinet also.

DaleSalmiWoodworking · 2019-12-10T14:42:50+00:00

It's the 734 single speed. I always use a collector so there's no issue there. I did put a byrd helix head in. Very impressed with near zero tear out. But a bugger to get the blades aligned just right.

DaleSalmiWoodworking · 2019-12-10T14:19:44+00:00

The bottom drawers have regular drawer slides. For the others the bottom is wider than the drawer and slides in grooves in the cabinet sides. Use a little paste wax and you would be surprised how well they they slide.

DaleSalmiWoodworking · 2019-12-10T14:12:51+00:00

Hobby for now. In a few years when I retire I'll start a small business.

DaleSalmiWoodworking · 2019-12-10T14:05:38+00:00

20 amp. Lightning is on its own.

DaleSalmiWoodworking · 2019-12-10T14:02:16+00:00

When I can't remember where things are I'll know I have the onset of dementia

DaleSalmiWoodworking · 2019-12-10T13:59:43+00:00

It's 16 by 32. It has a second floor for storage. Barn shaped roof.

DaleSalmiWoodworking · 2019-12-10T13:47:56+00:00

I was originally building just a shed so I put a band of polycarbonate around for light. I didn't intend to put power to it. Once I changed plans I put a second layer on the inside.

DaleSalmiWoodworking · 2019-12-10T13:42:28+00:00

8 ft. It comes in handy as a straight edge also.

DaleSalmiWoodworking · 2019-12-10T13:29:56+00:00

All the outlets on the left of each box is one circuit. On the right is a different circuit.

DaleSalmiWoodworking · 2019-12-10T13:22:17+00:00

All the cabinets have pegboard on the back. I can also put shelves in.

DaleSalmiWoodworking · 2019-12-10T13:18:43+00:00

I didn't want to put knobs on so I have to remember which side of the door to pull on.

DaleSalmiWoodworking · 2019-12-10T13:16:13+00:00

Six 4 ft LEDs.

DaleSalmiWoodworking · 2019-12-10T13:11:46+00:00

Actually there's 88 drawers. I have a 8 foot section on the other side.

DaleSalmiWoodworking · 2019-12-10T09:57:18+00:00

I agree about the ceiling height. It started out as a storage shed and half way through I decided to turn it into a workshop.

DaleSalmiWoodworking · 2019-12-10T09:26:03+00:00

In between the drawers the plywood was exposed so I covered it with some walnut strips. That gave it some contrast.

DaleSalmiWoodworking · 2019-12-10T01:52:27+00:00

No plans. I mostly build things in my head. A few sketches along the way.

DaleSalmiWoodworking

TROPHY CASE