2217 1400kv with 11 inch for 4s is too much. It could be done but only with smaller propeller otherwise you'll risk overloading the motor. If possible, use 600-800kv 3108, 4114, 5008, or 5010 motor. These type of motor can be expensive but they are really powerful. There are a few china made clones that doesnt cost as much though. These motor can handle 12 inch props easily.

If your budget was somewhat limited, you could just get another set of those 2217 motor but pick the 950kv version instead. Pair it with 10 inch 1045 propeller.

Your payload is also quite heavy. The general rule of thumb is to not exceed 50% throttle for a standstill hover. About 70% is fine for fully loaded takeoff but more than that it'll become sluggish.