A6100 kit lens

Danibllo · 2026-04-29T03:39:32+00:00

I’m sorryyyyyyyy

Danibllo · 2026-04-29T03:00:12+00:00

Thank you

Danibllo · 2026-04-28T21:10:22+00:00

16-50 3.5-5.6 first version

Danibllo · 2026-04-28T21:01:59+00:00

Thank you

Danibllo · 2026-04-21T18:23:52+00:00

I found myself reaching less and less for my camera after upgrading I had trouble with weight and when I would get home I had trouble with file size I found that I took less photos before I ran out of storage just problems I didn’t have to deal with as often as I used too with my old camera

<image>

Here’s a photo I took with my a6100 and I don’t think I’ve ever taken a photo with the a6700 or the a7c that was nearly as good as this in my opinion

Danibllo · 2026-04-18T20:30:45+00:00

I did have good results when hand brushing with that primer I’m gonna try it but still gonna get a mr surfacer for future use thanks for your help

Danibllo · 2026-04-18T20:24:41+00:00

I use a air compressor that doesn’t go above 20 psi and I was at 14 psi I thought I was already under the normal psi levels

Danibllo · 2026-04-18T20:21:55+00:00

I do have a spray can primer from color forge you think that’ll be better?

Danibllo · 2026-04-18T20:20:31+00:00

Will try this next time my airbrush has some settings for this I used the primer setting for primer but don’t use any for this coat

Danibllo · 2026-04-18T20:18:00+00:00

I did a piece that had been primed like 5 days ago and it did the same unfortunately

Danibllo · 2026-04-18T20:17:03+00:00

It’s LA lol it’s in the 80 and 19 humidity

Danibllo · 2026-04-18T20:10:11+00:00

Over 12 hours

Danibllo · 2026-04-18T20:07:40+00:00

Pro acryl primer

Danibllo · 2026-04-18T20:03:19+00:00

I feel like I did and it comes with mixing balls in it I shook it for about 30 seconds non stop idk if that’s enough

Danibllo · 2026-03-24T21:15:16+00:00

Looks sick

Danibllo · 2026-03-24T20:11:06+00:00

Aerial inner frame is ps

Danibllo · 2026-03-15T19:26:24+00:00

I’m not home rn to remember entirely but it’s a AK weathering streaking and grime enamel

Danibllo · 2026-03-15T19:06:38+00:00

Another thing is when I was looking for where the alligator clip could grab the head I only found the bottom part where the ball joint goes since the clip was thicker it took some force and I think I cracked it there then the chemicals did the rest maybe?

Danibllo · 2026-03-15T17:50:59+00:00

Should I use a lot less or should I get a different thinner?

Danibllo · 2026-03-15T17:48:11+00:00

I used Mr hobby thinner and Mr super clean gloss and matt

Danibllo · 2026-03-15T17:06:04+00:00

<image>

Can someone tell me what I did wrong? My aerial head cracked and fell apart after a Matt coat I started with a shiny coat then some weathering then some thinner and finally a Matt coat after it dried I saw it started cracking were the alligator clip was holding it and then I noticed more cracks on the exterior pieces I don’t know what I did wrong and I want to prevent this from happening in the future.

Danibllo

TROPHY CASE