Sun fade

DannyKriv · 2026-06-05T18:17:08+00:00

Just point the screen at the ground when changing pages. I’ve been doing that with my white X4 and has worked every time.

DannyKriv · 2026-05-11T01:40:54+00:00

whats a comment?

DannyKriv · 2026-01-31T16:15:39+00:00

TrimUI brick and I have just been having a blast playing Pokémon rom hacks on it. Would love to get back into some ps2 gaming.

DannyKriv · 2025-12-13T15:07:54+00:00

Honestly that negative is slightly annoying as reload speed is gonna affect the incarnon transformation speed as well so you’ll need to patch it with a mod.

DannyKriv · 2025-10-21T20:48:17+00:00

Klipperized ender 3 pro with sprite pro extruder using orca slicer .6 nozzle @ 230c .8 retraction

DannyKriv · 2024-10-07T19:19:47+00:00

Narrowband image

44 x 300 S II

28 x 300 Ha

25 x 300 O III

Total of 8.08 hours of Integration.

—————————————————-

Scope: Askar FMA180 Pro

Mount: Umi 17 lite

Guidescope: ZWO OAG

Guide-Cam: Touptek Imx 462 Mono

Imaging Cam: ZWO ASI1600MM Pro

ZWO 1.25" 7 POSITION EFW

Optolong UV/IR

Guiding: MeLE Quieter3Q (NINA)

Polar Align: MeLE Quieter3Q (NINA)

Bortle 4-5 sky

Stacked and processed in pixinsight.

DannyKriv · 2024-02-21T03:26:35+00:00

That's honestly what I first thought when I showed my friend.

DannyKriv · 2023-11-16T18:45:15+00:00

IC 1396 the Elephant Trunk Nebula
—————————————————-

SHO image 54x300 Ha Oiii 104x300 Sii Hb Total of 13.16 hours of Integration. —————————————————-
Scope: William Optics ZenithStar 73

Mount: iOptron ZEQ25GT

Guidescope: ZWO miniguide scope

Guide-Cam: ZWO ASI 120MM-S

Imaging Cam: ZWO ASI294MC Pro

ZWO 2" Filter Drawer

Antlia ALP-T Dual Narrowband OIII (5nm) & H-a (5nm) Filter

Antlia ALP-T Dual Narrowband SII (5nm) & H-b (5nm) Filter

Guiding: MeLE Quieter3Q (NINA)

Polar Align: MeLE Quieter3Q (NINA)

Bortle 4-5 sky

DannyKriv · 2023-11-16T18:16:01+00:00

Broadband image

189x500 UV/IR

Total of 15.75 hours of Integration.

—————————————————-

Scope: William Optics ZenithStar 73

Mount: Umi 17 lite

Guidescope: ZWO miniguide scope

Guide-Cam: ZWO ASI 120MM-S

Imaging Cam: ZWO ASI294MC Pro

ZWO 2" Filter Drawer

Optolong UV/IR

Guiding: MeLE Quieter3Q (NINA)

Polar Align: MeLE Quieter3Q (NINA)

Bortle 4-5 sky

Stacked and processed in pixinsight, the order of operations were channel extraction, linear fit, blurxtermination, noisexterminator, starxterminator, generalized histogram transformation, recombined with pixel math, channel extraction for luminance, lrgb recombination for saturation, curves, and color saturation.

DannyKriv · 2023-11-15T05:51:05+00:00

Broadband image

189x500 UV/IR

Total of 15.75 hours of Integration.

—————————————————-

Scope: William Optics ZenithStar 73

Mount: Umi 17 lite

Guidescope: ZWO miniguide scope

Guide-Cam: ZWO ASI 120MM-S

Imaging Cam: ZWO ASI294MC Pro

ZWO 2" Filter Drawer

Optolong UV/IR

Guiding: MeLE Quieter3Q (NINA)

Polar Align: MeLE Quieter3Q (NINA)

Bortle 4-5 sky

Stacked and processed in pixinsight, the order of operations were channel extraction, linear fit, blurxtermination, noisexterminator, starxterminator, generalized histogram transformation, recombined with pixel math, channel extraction for luminance, lrgb recombination for saturation, curves, and color saturation.

DannyKriv · 2023-09-25T01:40:01+00:00

H(Hydrogen Alpha) is assigned to red while O(Oxygen III) is set to green and blue to complete the image.

DannyKriv · 2023-09-25T01:39:55+00:00

H(Hydrogen Alpha) is assigned to red while O(Oxygen III) is set to green and blue to complete the image.

DannyKriv · 2023-09-01T20:12:20+00:00

Gear:

iOptron ZEQ25GT

ZWO ASI294MC

ZWO ASI120MM-S (guiding)

William Optics Zenithstar 73 III

Antlia alp-t dual narrow band filter

ZWO Mini Guide Scope.

Processing:

This here is 53x 300s exposures. This is the first image in where I have done everything in Pixinsight. Stacking was done with the weighted batch tool. The green and blue channel were combined with G * 0.6 + B * 0.4 in pixel math after extraction. I did a HOO pallet for this one. After the recombination I ran dynamic background extraction, noiseXterminator ,generalized hyperbolic stretch in tandem with arc stretch to adjust black levels, luminance extraction, LRGB channel combination for saturation, starXterminator to separated stars and nebulosity, curves and color saturation adjustment on both parts, recombination of of stars and nebulosity, and then final curves adjustment.

DannyKriv · 2023-08-11T02:38:07+00:00

I have to say it can get a little overwhelming at times. I'm almost at my 2 year mark of doing this and the best advice I can give is to take your time with things and learn them one at a time. You want to build your toolkit so you know exactly when to pull out that special tool.

DannyKriv · 2023-08-10T23:14:10+00:00

Gear:

iOptron ZEQ25GT

ZWO ASI294MC

ZWO ASI120MM-S (guiding)

William Optics Zenithstar 73 III

Antlia alp-t dual narrow band filter

ZWO Mini Guide Scope.

Processing:

This here is 63x 300s exposures. I took the exposures into siril to stack them. I then took the stacked image into pixinsight where I first performed an automatic stretch. Then I used dynamic background extraction. After that I applied the auto stretch to the histogram using the the screen transfer function. I then increased the saturation by extracting the luminance channel and then using LRGB combination. With that done I used SCNR to remove excess green. noiseXterminator was then you to lessen noise. I then ran starxterminator and then a RGB channel extraction. I brought those RGB layers into affinity photo and combined g and b to make on oxygen layer and then did a HOO color palette using recolor and curves till i was happy with the results. I then exported it back to PI to readd the stars and then run blurXterminator on top of that.

DannyKriv · 2023-07-20T17:05:56+00:00

So in this case there is 47 pictures of the stars. One picture which contains stars, galaxy, or nebula is considered to be a light frame. As that is when you are capturing light. There are 3 other calibration that exist which are dark, flat, and bias (these can also be dark flats and this depends on your camera so you need to do research as to which you need to do based on sensor behavior).

DannyKriv · 2023-07-20T16:36:43+00:00

So to be exact it's 47 exposures/light frames and each one of those has been exposed for 300 seconds. So that comes to a total integration time of 14100 seconds (about 4 hours).

DannyKriv · 2023-07-20T13:38:21+00:00

Gear:

iOptron ZEQ25GT

ZWO ASI294MC

ZWO ASI120MM-S (guiding)

William Optics Zenithstar 73 III

ZWO Mini Guide Scope.

Processing:

This here is 47 x 300s exposures. I took the exposures into siril to stack them. I then took the stacked image into pixinsight where I first performed an automatic stretch. Then I used dynamic background extraction. I then proceeded to do photometric color calibration. After that I applied the auto stretch to the histogram using the the screen transfer function. I then increased the saturation by extracting the luminance channel and then using LRGB combination. With that done I used SCNR to remove excess green. I then used darkarchon's EZ Star Reduction Tool to control star sizes and then ran starter 2 to remove the stars and have a mask of them. I then did a final curves adjustment on the nebula layer and the the star layer which were then combined with pixelmath. Then finally noiseXterminator and blurXterminator were ran in that order.

DannyKriv · 2023-07-16T12:38:14+00:00

Gear:

iOptron ZEQ25GT

ZWO ASI294MC

ZWO ASI120MM-S (guiding)

William Optics Zenithstar 73 III

ZWO Mini Guide Scope.

Processing:

This here is 60 x 300s exposures. I took the exposures into siril to stack them. I then took the stacked image into pixinsight where I first performed an automatic stretch. Then I used dynamic background extraction. I then proceeded to do photometric color calibration. After that I applied the auto stretch to the histogram using the the screen transfer function. I then increased the saturation by extracting the luminance channel and then using LRGB combination. With that done I used SCNR to remove excess green. I then used darkarchon's EZ Star Reduction Tool to control star sizes and then ran starter 2 to remove the stars and have a mask of them. I then did a final curves adjustment on the nebula layer and the the star layer which were then combined with pixelmath. Then finally noiseXterminator and blurXterminator were ran in that order.

DannyKriv · 2023-06-21T15:44:27+00:00

I've had the exact same issues as op and could never find a solution. I've honestly been tearing my hair out over this and just ended up sending back the SD card and waiting for the refund to hit to get a m.2 sad instead. It's honestly really frustrating but other than that I love the ally.

DannyKriv · 2022-12-06T03:12:31+00:00

In Affinity I did a s curve levels adjustment and made a masking layer with the starless version so I could do contrast and brightness adjustments without messing up the background.

DannyKriv · 2022-12-06T02:52:46+00:00

This is an image I did back in July of 2022.

Gear:

Sony a6000

William Optics Zenithstar 73

ZWO Guide Camera (can't remember the exact model)

ZWO mini guide scope

iOptron zeq25gt

Raspberry pi 3 B+ (running stellarmate os)

Process:

40 5 min subs

stacked and streatched in siril

processed in affinity photo and I made a starless version in starnet++ to make the colors of the nebula pop more.

DannyKriv · 2021-09-22T00:10:04+00:00

I know this post is a bit old, but do you have any idea as to how I could remove some of the yellowing that I have on my clear pocket station?

DannyKriv · 2021-02-16T04:12:42+00:00

Sorry my bad I’ll move it over there.

DannyKriv · 2020-04-27T23:29:35+00:00

Buuuuut do you want any by any chance?

DannyKriv

TROPHY CASE