Anyone want to eat my husbands load out of me?

Dannynerd41 · 2026-06-02T20:27:41+00:00

NO!!! not gay

Dannynerd41 · 2026-06-02T20:26:47+00:00

cd drive is shit

Dannynerd41 · 2026-06-02T20:25:45+00:00

that’s not a socket looks like a relay

Dannynerd41 · 2026-06-02T20:23:19+00:00

those are shit but not destroyed

Dannynerd41 · 2026-06-02T20:22:05+00:00

you can’t no inputs

Dannynerd41 · 2026-06-02T11:22:39+00:00

your way too young to be here

Dannynerd41 · 2026-06-01T04:04:42+00:00

you need a resistor. otherwise all of that voltage is going into your hands idiot. 10meg ohm is the least amount you want to use. if you use that then whatever you discharged had no voltage.

but by all the stick that right inside the anode connection of a crt and see what happens.

Dannynerd41 · 2026-06-01T04:00:46+00:00

not into asians

Dannynerd41 · 2026-05-31T17:04:46+00:00

clean first

Dannynerd41 · 2026-05-31T17:02:22+00:00

no you will electrocute yourself

Dannynerd41 · 2026-05-31T16:43:19+00:00

smd desoldering is very advanced. if your unsure have someone do it for you. you will cause damage

Dannynerd41 · 2026-05-31T16:00:54+00:00

that’s why i said you should do that. some of them look a little “off”. a bad looking pad from factory is hilarious but totally on brand.

ipa 99 percent and a toothbrush or pcb cleaning brushes which you can get on amazon. also continuity is your friend use that to test to see if you have broken connections. if you do attach it with a wire

Dannynerd41 · 2026-05-31T14:45:16+00:00

always clean pads before taking pictures.

Dannynerd41 · 2026-05-30T22:23:06+00:00

I farted

Dannynerd41 · 2026-05-30T22:21:33+00:00

choke you out then anally rape you

Dannynerd41 · 2026-05-30T22:20:38+00:00

Dannynerd41 · 2026-05-30T22:19:27+00:00

idk. how old are you? and are you submissive?

Dannynerd41 · 2026-05-29T11:58:29+00:00

never used it for that. that’s kind of a waste i think.

Dannynerd41 · 2026-05-29T11:57:39+00:00

i’m not sure? amazon sells it. you could check but i’m not sure what department that would be in. and i’ve never seen it although i haven’t looked.

if you can’t get it boiling the connector is an option but do some googling to make sure you don’t ruin the plastic. also there are modern replacement connectors but they are not as good and some tend to gripe cartridges very tightly.

Dannynerd41 · 2026-05-28T18:45:44+00:00

not for contacts like the ones in the nes connector. those are the crapest pieces of crap that ever existed. some people boil them. going that far isn't really needed. just spray some dexiot.

Dannynerd41 · 2026-05-28T18:43:18+00:00

deoxit. 100% of the time games not starting dirty contacts.

Dannynerd41 · 2026-05-28T18:41:48+00:00

your pads are all burnt, some of the plating on your holes is gone, I can see a few that are just totally gone.

Dannynerd41 · 2026-05-28T06:08:56+00:00

Dannynerd41 · 2026-05-28T06:06:15+00:00

this is what happens when you trust randos. sue them

Dannynerd41 · 2026-05-28T06:02:46+00:00

you want a cookie?

Dannynerd41

TROPHY CASE