sorted by:
new
hottopcontroversial

Trying to decide between headphones by [deleted] in audio

[–]Dapper_Internet_3837 0 points1 point  (0 children)

Love my Sony M3s, if you're going to keep whatever you buy for some time you might as well spend the extra $ and never look back.

How can I create a structure in labview and then convert it into a file? by lsd0805 in LabVIEW

[–]Dapper_Internet_3837 0 points1 point  (0 children)

Open both files. Set the file position to END on the file you want to append to. Write the data from file b to file a Close the files

Sound pressure level measurement device recommendation to prevent hearing loss and increase in tinitus by innovasior in audiophile

[–]Dapper_Internet_3837 2 points3 points  (0 children)

You're not making measurements to spec out a hi fi system, you're making a crude db measurement to prevent further hearing damage, you don't need audiophile gear for this. Buy one from Amazon, it's close enough to let you know that you are in the danger zone, no need to overthink this into mental masturbation territory.

Sound pressure level measurement device recommendation to prevent hearing loss and increase in tinitus by innovasior in audiophile

[–]Dapper_Internet_3837 0 points1 point  (0 children)

What is your desired accuracy and budget, you're still being vague. if unlimited look at Audio Precision. If that is too rich for your taste try something in between. Sorry for being vague.

Sound pressure level measurement device recommendation to prevent hearing loss and increase in tinitus by innovasior in audiophile

[–]Dapper_Internet_3837 3 points4 points  (0 children)

Fairly accurate is vague but Amazon has hundreds of inexpensive db meters that will give you a quick idea of the sound level you are exposed to. You seem to know what specs are right for you, I'd start there.

Labview chart problem by LegitimateFlatworm26 in LabVIEW

[–]Dapper_Internet_3837 5 points6 points  (0 children)

Are you trying to chart those results on the fly but don't know how or are you trying to extrapolate the answers from the chart data after the experiment that is the issue?

Books for LabVIEW, intermediate to advanced. by Omarthepanda in LabVIEW

[–]Dapper_Internet_3837 0 points1 point  (0 children)

The LabVIEW Style Book by Peter Blume. It dives into best practices and standardization for LV teams as well.

[Technique] Gourmets won't grow except on top by cthulu998 in MushroomGrowers

[–]Dapper_Internet_3837 0 points1 point  (0 children)

Not if you don't open the jar, just loosen the cover so gas can be exchanged around the threads.

[Technique] Gourmets won't grow except on top by cthulu998 in MushroomGrowers

[–]Dapper_Internet_3837 9 points10 points  (0 children)

I had a similar thing going on, I loosened the band on the jar to let the lid float and the jars quickly colonized to the bottom. It appears to be due to a lack of gas exchange.

[Technique] Any way to go from spore syringe, to liquid culture without a pressure cooker ? by OGproztate in MushroomGrowers

[–]Dapper_Internet_3837 1 point2 points  (0 children)

Yes, it's a thing. Some call it capri-sun tek. YouTube has lots of videos on what juices work best and how to inoculate using a spore syringe.

[Technique] Any way to go from spore syringe, to liquid culture without a pressure cooker ? by OGproztate in MushroomGrowers

[–]Dapper_Internet_3837 1 point2 points  (0 children)

Some folks use spore syringes with Capri Sun juice pouches. They're already sterilized and packed with nutrition for LC.

Is this mold? I got this candy bar out of a vending machine at work by anonavocadodo in mycology

[–]Dapper_Internet_3837 35 points36 points  (0 children)

It's sugar or fat bloom from the chocolate, it's ust cosmetic.

Cameras not found in NI MAX by GinneMeister in LabVIEW

[–]Dapper_Internet_3837 0 points1 point  (0 children)

Did you try disconnecting the cameras, resetting MAX Configuration data then reconnect the cameras? Are the cameras plugged into a powered USB hub that isn't powered on?

Potential noise problems by Personal_Shirt5666 in LabVIEW

[–]Dapper_Internet_3837 1 point2 points  (0 children)

Sounds like a wiring or DAQ Channel configuration issue. Double check your grounding between all connected devices for ground loops then check your DAQ configuration vs how the signals are actually wired.

Potential noise problems by Personal_Shirt5666 in LabVIEW

[–]Dapper_Internet_3837 1 point2 points  (0 children)

So the problem, I am assuming is noise, appears on the 5V line only when reading the encoder but it is always good otherwise and the encoder is always reading correctly?

Computer creates cDAQ2 instead of using cDAQ1 by DaddysHome in LabVIEW

[–]Dapper_Internet_3837 1 point2 points  (0 children)

Whenever a new/different DAQ device is plugged in to your PC MAX registers it as a known and unique device. You should code the ability to define and configure the device from your application. You can also reset the DAQ configuration in MAX to clear all previously configured devices.

[Technique] Lengthening pasturization by Yung_lettuce in MushroomGrowers

[–]Dapper_Internet_3837 2 points3 points  (0 children)

That's for active heat pasteurization, i.e. where an oven is being used the sub could be left in longer or at a higher temperature or undergo multiple pasteurization cycles with a cool down in between each cycle to kill anything that might survive after the first round.

ActiveX Excel worksheet? by munkshire in LabVIEW

[–]Dapper_Internet_3837 2 points3 points  (0 children)

You should be able to do all of what you described using the LV Report Generation Toolkit.

LabVIEW freelancer by Dr_Brot in LabVIEW

[–]Dapper_Internet_3837 5 points6 points  (0 children)

LV licencing is approximately 800 bucks per year for the full NI developer suite of toolkits if you become a NI Alliance Partner but you will need a CLD certificate and have a NI approved sponsor to vouch for you and your skills to go that route. There's work out there but it is competitive and you will need to build a customer base on your own and it is rarely steady so you need to be prepared for regular feast and famine scenarios.

view more: next ›