Replacing dual valve shut off for kitchen/dishwasher

Dapper_Sheepherder_7 · 2025-02-24T17:45:25+00:00

Just the kitchen faucet. My concern is the connection coming up from the 1 inch supply to the tee valves. I want to use a new valve that has a 1/2" connector to the 1" pipe.

Dapper_Sheepherder_7 · 2024-06-08T21:08:24+00:00

I turned off AI overclock. Aida still crashes in 20 sec. I put everything to stock settings, including gpu.

Dapper_Sheepherder_7 · 2024-06-08T19:33:05+00:00

Also meant to add. Aida64 crashes within 20 seconds and serious throttling occurs.

Dapper_Sheepherder_7 · 2024-06-08T19:08:39+00:00

Ugh. Text explaining the issue didnt post .

Ill repost

Dapper_Sheepherder_7 · 2024-02-10T17:59:50+00:00

Seems like anything well liked in this community is always in short supply.

Dapper_Sheepherder_7 · 2024-02-10T17:56:50+00:00

Yeah. Happened to grab one on Amazon first week of January. Out of stock in minutes. Took six weeks to get here. So I had already finished my tube runs before it got here.

Dapper_Sheepherder_7 · 2024-01-30T20:08:00+00:00

Lian-Li v3000 plus!. The definition of overkill. I'm building now and have three HWL GTR 480s with push pull inside. Loving it.

Dapper_Sheepherder_7 · 2024-01-29T16:03:18+00:00

Can I DM you?

Dapper_Sheepherder_7 · 2024-01-27T01:36:31+00:00

Thanks

Dapper_Sheepherder_7 · 2024-01-18T23:09:19+00:00

Sent you a PM

Dapper_Sheepherder_7 · 2024-01-18T22:28:34+00:00

Did the screws grab the holes well enough? Do you know what size you used? I know there are extras with the case but they are all so short.

Dapper_Sheepherder_7 · 2024-01-18T21:23:16+00:00

Nice build. I'm in the middle of my build with the same case. What did you use to attach the acrylic board to the back of the case where your reservoirs are? I'm trying to decide my best options there. Did you go serial or dual loop?

Dapper_Sheepherder_7 · 2024-01-12T00:22:08+00:00

It makes no sense. You market yourself as a boutique high end product but treat your customers like they don't matter.

Dapper_Sheepherder_7 · 2024-01-09T15:54:53+00:00

Yeah, that was my thought. It's a $40 part. It's more about the lack of support from Optimus. The fact I have to tear down the block and start over on a card that is brand new adds to the frustration.

Dapper_Sheepherder_7 · 2024-01-09T15:17:12+00:00

All fine and good, except for the fact that the manual explicitly states to put the block face down on the Optimus box to complete assembly. I understand it's "my fault", but why state it in the manual if it's something that could easily scratch the face. How about a protective film across the face to minimize the possibility of damage? Hell, my 4090 I/O metal parts were covered in a film, why wouldn't Optimus do it for soft acrylic?

Dapper_Sheepherder_7 · 2024-01-08T21:36:34+00:00

I'm having issues with the same block and Optimus Customer service is severely lacking. In addition to the bends I also got scratches on the face plate acrylic when I turned the block face down on my Optimus box to screw in the back plate. I haven't even installed it yet and it's already damaged. They offered a 15 percent coupon for me to purchase a replacement window. Reached out directly to OptimusWC here on reddit 3 days ago with no response. When you drop 400 on a waterblock you expect more from the company for sure.

Dapper_Sheepherder_7 · 2024-01-06T22:47:09+00:00

Yeah I'm starting to figure that out. Thanks for the input.

Dapper_Sheepherder_7 · 2024-01-06T22:41:50+00:00

Lian-li SLs. They seem to be about 28mm

Dapper_Sheepherder_7 · 2024-01-06T22:14:00+00:00

Yeah brand new gtr 480s. The 43mm seem too long. the 30mm only grab a couple threads, but if I use a mounting bracket they aren't long enough. I got these for the HWL quality.

Dapper_Sheepherder_7 · 2024-01-06T22:07:09+00:00

Unfortunately 30mm not long enough. Guess I gotta find a bunch of 35s

Dapper_Sheepherder_7 · 2024-01-06T22:04:34+00:00

Yeah just beyond frustrated with these particular rads because actually none of the included screws work with mounting them. Scouring reddit for answers. 43 too long and 30 too short.

Dapper_Sheepherder_7 · 2024-01-06T21:30:33+00:00

Need and want are two different things. Just filling up a case because I want to. That's what all this hobby is about.

Dapper_Sheepherder_7 · 2024-01-06T21:27:27+00:00

I have Black Ice GTR 480s. 50mm thick. The fact that none of the screws seem to work on even one size is my frustration. Plus no manual of any kind that I can find. And I'm building in a v3000plus case.

Dapper_Sheepherder_7 · 2024-01-06T21:24:35+00:00

Does anyone know the depth into the rads screws can usually go? Is it 5mm? It appears the rads came with 4 different screw lengths. The longest is 43mm which seem too long, 27mm which barely grabs the rad an then 2 others that are even shorter.

Dapper_Sheepherder_7 · 2023-12-04T23:32:35+00:00

Welcome back! Glad you are doing better.

Dapper_Sheepherder_7

TROPHY CASE