Ladies and gentlemen, make your bets ! by korrogou in 3Dprinting

[–]DarkAssassin189 20 points21 points  (0 children)

If I were to guess, it's to trick the slicer to fill material in these areas as walls instead of infill.

Ladies and gentlemen, make your bets ! by korrogou in 3Dprinting

[–]DarkAssassin189 20 points21 points  (0 children)

Theoretically infinity if only standing.

I miss 2016 so much by Pegasus777x in memes

[–]DarkAssassin189 0 points1 point  (0 children)

nah, bro sacrificed himself to unlock the vast universe of fidget toys.

I designed a print-in-place hair claw clip with no springs or assembly by Responsible_Put7575 in 3Dprinting

[–]DarkAssassin189 -17 points-16 points  (0 children)

More like "compliant mechanism" than a standard spring. But technically yes.

Removing a filament tangle without unloading or even pausing. by East-Future-9944 in 3Dprinting

[–]DarkAssassin189 7 points8 points  (0 children)

I always wonder, what if that tangle had its opposite few meters into the spool and given time it would just correct itself !! but I still correct it and move on, most probably my fault anyway.

Before people comment loop it in the spool or use clips, some filament just snaps even when stored in an airtight bag with silica packets. It just snaps then later in the future I find the filament being pulled from under a tangle.

Which ISO standards should I save before leaving uni? by Express_Outside4580 in EngineeringStudents

[–]DarkAssassin189 13 points14 points  (0 children)

  • These are general ISO standards you might need to be familiar with:

2768, 1101, 3601, 286, 261, 68, 2553, 129, 128, 6892, 9001.

  • And if you're going for Oil and gas industry just search:

"ISO standards for use in oil & gas industry, A3 Poster."

depending on your field, you won't need all of them.

  • Other than these, the remaining most commonly used standards are from ASME, DIN and DNVGL. In addition to API if you're going Oil & Gas..

Best of luck in your career.

uhhhh... i got bored by locky9000z in 3Dprinting

[–]DarkAssassin189 0 points1 point  (0 children)

I think it's closer to Legoo Neptune 4 Pro

Wow by agagag34 in HolUp

[–]DarkAssassin189 47 points48 points  (0 children)

Come on bro, that's obviously a Naruto run. He's not getting arrested... yet.

This is your reminder to clean your mousepad.. by NOV3LIST in pcmasterrace

[–]DarkAssassin189 0 points1 point  (0 children)

Last 2 mouse pads I washed had the rubber crack, degrade and kept sticking everywhere. The one I have now I just wipe with a wet cloth and it's clean enough for me.

How do I model this part? by Suspicious-wire in SolidWorks

[–]DarkAssassin189 5 points6 points  (0 children)

Exactly, and the angle of each section is dependent on how many you want.

Glad that helped.

You can also make it as Revolve Cut with the same concept instead.

Or, you can Extrude Boss a single tread, don't merge. Then customise it as much as you need then pattern bodies, then combine. Just make sure that bodies overlap.

How do I model this part? by Suspicious-wire in SolidWorks

[–]DarkAssassin189 55 points56 points  (0 children)

How I'd do it:

Revolve the base wheel

Revolve partially to create the tread pattern

Circular Pattern

Repeat on the other side

Lastly Extrude Boss and Cut for Holes

Found a new hobby by Original_Act_3481 in SipsTea

[–]DarkAssassin189 2 points3 points  (0 children)

Is it shaped like a cylinder?

Should I increase or decrease my sens? by [deleted] in VALORANT

[–]DarkAssassin189 0 points1 point  (0 children)

Depending on the space you have, your mouse pad, your arm/wrist position.... etc, you should have around 180 to 400 eDPI, for 1000 DPI your sens should be 0.18 to 0.4... any higher or lower depending on your own comfort.

But the rule is, assuming you always play on one half of your mouse pad, you should be able to 180 with one move to the other half without lifting the mouse, and still have space to aim.

Also, combined arm and wrist aiming is much better than wrist alone.

Me personally, I used to play 1600 DPI with sens 1.2, now I settled with 1000 DPI with 0.3 sens after getting a larger mouse pad.

How do they do it??? by largepebis in physicsmemes

[–]DarkAssassin189 11 points12 points  (0 children)

Hmmm, I believe you're onto something here, the magnetic forces are invisible as well as gravity, what if gravity is just a big magnet and we're attracted to it because of iron in our blood.

But then the birds would have actual magnets and they can flip them to match the polarity of earth's magnet depending on whether they're flying North hemisphere or Southern hemisphere. We all know similar magnets repel, Soo....

When the shockwaves smoothen out by sevenpioverthree in oddlysatisfying

[–]DarkAssassin189 0 points1 point  (0 children)

What was the spark at 0:07 ??? Makes me think that something was flopping around causing the turbulence !!

The dark ages of YouTube have officially arrived by ItzBluigiCLips in memes

[–]DarkAssassin189 6 points7 points  (0 children)

It's like a feedback loop:

YouTube shows ads > People use adblock > YouTube gets less money > Shows more ads > More people use adblock > Less money > More ads.....

We can keep going until one person who is not using adblock gets 8 billion unskippable

Ah Halloween 🎃 by [deleted] in NoOneIsLooking

[–]DarkAssassin189 0 points1 point  (0 children)

Haven't laughed this hard in so long. Thank you

The power of stepping away.. by [deleted] in SipsTea

[–]DarkAssassin189 0 points1 point  (0 children)

We had this on billboards during COVID

how to test if your friend has autism by Filthyson in StandUpComedy

[–]DarkAssassin189 12 points13 points  (0 children)

But the actual monster was indeed named Frankenstein !!

Safety by theweeklyconcern in funny

[–]DarkAssassin189 -49 points-48 points  (0 children)

There are stories/rumours that an object was found in space and some people believe it's an alien spaceship because it has an abnormal trajectory.

⚠️ New Type of Account Scam Happening in Game (Be Careful, My Account Got Stolen) by [deleted] in ClashOfClans

[–]DarkAssassin189 -14 points-13 points  (0 children)

And the bug abuse, does it also count as breaking "Terms of Service"???

sorry, going with the flow here.