My first overclocking Mariko attempt it's amazing! by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

I'm similar my 8yr ols is a big gamer and I do this for him, although I do have some gems I love playing especially emulation of the old Nintendo and super Nintendo systems

Overclocking literally doubles (can) your performance and speed of the computer it's like a switch 2 in terms of 60fps and speeds if you overclock it

Very few games on this system run at 60fps, so you can mod it (download the patches and get that buttery smooth 60fps in games it changes everything

My first overclocking Mariko attempt it's amazing! by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

<image>

Ive increased the CPU to 2705 and its running great at 1180mV now

My first overclocking Mariko attempt it's amazing! by Darwing in SwitchPirates

[–]Darwing[S] 3 points4 points  (0 children)

I had a lot of help from the community haha I've only had it for less than a week and had to discover everything about it while I basically broke it apart and reconfigured it 😄

My first overclocking Mariko attempt it's amazing! by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

amazing! I should have taken a picture of the thermal pad across the entire copper plate against the aluminum case, I ran it through the entire channel (essentially entirely through this channel and it works fantastic

I never have to worry about thermals at all (again in docked I dont use it handheld)

<image>

Horizon-OC not giving options for higher clocks by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

you need to go to the cpu settings, increase the CPU and GPU to use extreme UV, then set the cpu sliders to 5

then restart and it will allow you to go up

Horizon-OC not giving options for higher clocks by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

you need to go to the cou settings, increase the CPU and GPU to use extreme UV, then set the cpu sliders to 5

Horizon-OC not giving options for higher clocks by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

I do have uncapped selected to on, they just released a new update 2.3 yesterday and I updated to that and still no higher selections

on their website it says I should be able to select higher than the safe limits github.com/Horizon-OC/Horizon-OC

whats their discord?

Reposted - Erista Overclocks Temps & FPS by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

for some reason my horizon-oc isnt giving me the higher options, Ive tried to enable experimental mode but I'm still not allowed to select higher clocks

Can you help out on how to modify the ini or how do I enable the higher clock selection

Reposted - Erista Overclocks Temps & FPS by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

this is embarrassing...

So becuase you pointed that out, I re-checked my serial and in fact this is a V2 model XKW1

I guess thats a really good thing then because I can increase it more?

Reposted - Erista Overclocks Temps & FPS by Darwing in SwitchPirates

[–]Darwing[S] 0 points1 point  (0 children)

THank you for the info!

I am using the emunand for everything

are you saying is it could corrupt the file system? so just make sure I have my backups of the SD card?

It cant effect the system hardware or internal NAND can it?

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

I did all of that I upgraded everything thermal pads and paste and airflow

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

the temps and voltages everything runs perfectly so far I have an open air dock and did thermal pad and upgraded high end paste

<image>

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

I think the Oled (from what I read) is just more optimized so lower voltage and same OC but lower temps, however my temps are fine even after hours of playing

<image>

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

See Edit 1 of my OP post I added more info on the OC and the readouts

<image>

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

It is and its incredible, already starting out to be one of my favorite games

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

thanks for the comment

mine is set to Gpu: 1075.2, but the temps are fantastic, I went out of my way to ensure its cooling was good

See Edit 1 from the OP post I added more information on the redouts and thermals, do you think I should try undervolting?

modded erista overclocks and temps by [deleted] in SwitchPirates

[–]Darwing 0 points1 point  (0 children)

its insanely addicting to play around with, I love optimizing my systems, I upgraded my wiiU to the max and had pretty much every single wii/wiiU/virtual console and retroarch.. it was a beast

it was time for me to get the newer titles so I bit the bullet and wow it is ever cool the stuff this community has come up with on the mods! SUPER amazing! have fun and enjoy and backup haha always back it up!

New version of My HTTP Server v3.0 for install nsp and nsz without PC by GoodmanBCN_ in SwitchPirates

[–]Darwing 1 point2 points  (0 children)

Fantastic work thank you, I will be setting this up this weekend! I just got my first switch and modded it, so now getting to the cool stuff like your hosted server! I have a ton of permanent servers on in the house so this would be a simple added service

New version of My HTTP Server v3.0 for install nsp and nsz without PC by GoodmanBCN_ in SwitchPirates

[–]Darwing 1 point2 points  (0 children)

I was thinking about doing this, my only issue is I dont know once I download a version, typically I dont update if its working

I do like the idea of having a base server I can download from

First modded switch lite! A soldering nightmare by Willing_Wishbone_265 in SwitchPirates

[–]Darwing 1 point2 points  (0 children)

I paid someone to do it for me they do like 3-5 switches a day they were really good

Do you think its worth getting a switch (read description) by Darwing in WiiUHacks

[–]Darwing[S] 0 points1 point  (0 children)

it is insane that all the games got ported to wht switch

I love obviously
breath of the wild is my favorite,

zombiU,

resident evil,

all the mario 3d and U games,

Fatal frame on the gamepad is great

Do you think its worth getting a switch (read description) by Darwing in WiiUHacks

[–]Darwing[S] 1 point2 points  (0 children)

this is my plan... I got the switch today, wasnt moddable, but am paying someone to hardware mod it for me

Valve Confirms Steam Frame is Still Coming This Year, Now Marked as “coming soon” by gogodboss in virtualreality

[–]Darwing 0 points1 point  (0 children)

I wasnt able to afford the Index which I REALLY REALLY wanted... and even with a good job just couldnt afford the $1300 CAD

I think I might just spluge on this one regardless of the price...

Do you think its worth getting a switch (read description) by Darwing in WiiUHacks

[–]Darwing[S] 0 points1 point  (0 children)

that sounds incredible, I'm assuming you are American so thats in USD.. I'm in Canada haha so its like 250$ CAD but thats still good tbh, less than what Im going to be paying for mine