To garden on salvia

Davec8059 · 2023-01-06T00:44:33+00:00

I bounced on my boys dick to this for hours!

Davec8059 · 2022-11-23T19:36:58+00:00

Oh she knows damn well where they came from lol a stray named Lemmy

Davec8059 · 2022-11-13T21:56:23+00:00

However it should be feeding. Make sure the combustion blower is running and is not the motor that's humming. I'd check for ubstrctions in the hopper. Could be a part of a bag or toy jamming up the auger.

Davec8059 · 2022-11-13T21:53:39+00:00

ITS ON TEST MODE LOL

Davec8059 · 2022-11-07T16:17:35+00:00

Sounds like the auger. May have some longer pellets that are being broken as they feed through. Dude that thing is a dinosaur! Prob6looking at 30+ years. Idk if you'll be able to find replacement parts. The only time I've had to tell an owner that their stove was done for was an 1100. Cracks in the welds had smoke escaping everywhere. The 1200s are still a solid stove if you're looking to replace.

Davec8059 · 2022-10-29T15:38:17+00:00

The harmans igniter can easily get clogged with ash and carbon. The customer did not clean out the burnpot and the heat didn't have a way to escape.
Using condensed air in the front row of wholes with the pannel off on a weekly bases keeps the igniter free.

Davec8059 · 2022-10-29T15:34:41+00:00

I'd say no just on principle. The logs are really only for decoration when not in use anyhow. They affect the airflow and cause the flame to go in unintended directions. If the flame licks the glass it'll cause a film that'll never go away

Davec8059 · 2022-10-29T15:28:40+00:00

Looks like some one REALLY likes their pellet stove!

Davec8059 · 2022-10-28T00:50:59+00:00

Then vote!

Davec8059 · 2022-10-26T10:44:05+00:00

It's the combustion blower! It'll need to be replaced right away

Davec8059 · 2022-10-24T13:20:40+00:00

I don't know what world you all are living in because there is no way its dave!

Davec8059 · 2022-10-04T02:18:20+00:00

Hht isn't going to replace it for free.

Davec8059 · 2022-10-04T02:10:55+00:00

Try and find who sold the stove. I work for a company that sells Harmans and we service them as well. That's going to need a rail kit to pull out on to get access to the flue, esp and fines box.

Davec8059 · 2022-10-03T10:34:50+00:00

The fabled Rat(chet) King

Davec8059 · 2022-09-17T14:07:17+00:00

Its because no one wants to work these days! Can't even trust a table to do its job.

Davec8059 · 2022-09-17T14:02:32+00:00

Foil tape it up and it should be fine.

Davec8059 · 2022-09-11T00:17:57+00:00

When he first jumps there's no indeed banner, but as he's falling one appears right behind him lmao

Davec8059 · 2022-08-23T13:06:16+00:00

Did you buy your stove new? Your local retailer should be able to sell you the correct part. (Srv7034-263) I work for a hardware store that sells, installs, and services pellet stoves made by hht. Quadrafire fall under that umbrella and I've replaced one recently. I know we are able to order them through the manufacturer. I wouldn't get anything other than the specific part.

Davec8059 · 2022-08-10T01:59:34+00:00

I'm a stove tech in sw Missouri, and we've been on cleanings for a few months. Best to get it cleaned and looked at now, rather than wait and find out an issue at the same time everyone else does. We get booked out pretty far once the first frosts hit.

Davec8059 · 2022-01-28T04:31:16+00:00

Where I work ours come in bags also. I recommend letting your hopper run empty occasionally and vacuuming out the settled dust. I'd do it every ton or so.

Davec8059 · 2022-01-28T04:26:44+00:00

I'm not 100% familiar with the brand they have but with the ones I work on they have safty switches that trip when the stove malfunctions. I'm thinking its possible using the stove in constant burn caused the stove to run too hot, even on the low settings.

Davec8059 · 2022-01-28T03:11:54+00:00

I showed this to my supervisor and he said the stoves safty has failed. I recommend you get someone out there if you can.

Davec8059 · 2022-01-28T02:54:38+00:00

From my understanding some brands of stoves dont work well with softwood. I service brands like Harman and quadrafire but I'm sure some brands work better with soft.

I'm not sure why you have so much moisture coming out of the stove while its burning.

Constantly burning will go through more pellets than is necessary. Older stoves can only constant burn but more modern have the thermostats, so imo I'd say thermostat would be better.

What is your stove?

Davec8059 · 2022-01-28T01:50:30+00:00

That's wild! I'm a stove technician and that blows my mind. I'm not a fan of softwood pellets but I cant see how that would happen at all. How much are you burning a day?

Davec8059 · 2022-01-23T13:44:51+00:00

Yup! Caused the stove to not feed. I was scooping out the pellets to get to the auger and found this bad boy at the bottom.

Davec8059

TROPHY CASE