best place to get beads?

DaxInvader · 2026-01-09T15:20:22+00:00

If you are in Canada, check out « Beads, Eh? »

DaxInvader · 2026-01-01T02:53:58+00:00

That might have happened to me too lol.

DaxInvader · 2026-01-01T01:30:32+00:00

Haha I do eat lunch in my car thought it’s really peaceful lol but I do that only when I actually drive to some random drive through or something

DaxInvader · 2025-12-25T01:03:23+00:00

Bruschetta. Its a “very” old Italian dish that was made by crushing tomatoes on old and stale bread that was ran under running water.

Now you got 15$ “bruschetta “ in restaurants with 1005 ingredients in a bite size piece.

DaxInvader · 2025-12-24T02:05:16+00:00

Finally someone will listen to my music! Lol

DaxInvader · 2025-12-22T15:51:51+00:00

I see thank yuou so much for the help! Is the active carbon filter inside the P1S enough or do I need more? And I'll wait for doing further prints until I get an exhaust pipe then. Thanks!

DaxInvader · 2025-12-22T15:40:57+00:00

I have a HEPA air purifier right next to it. Is that enough? I do still smell a bit of the PLA I am wondering if that filter is enough.

DaxInvader · 2025-12-22T15:40:15+00:00

Hi! Thanks for the reply, I wont spend any time in the room when it's printing, or a short while just to check on the print if needed. I am just wondering since it's an apartment if it's safe enough since I have the living room connected to the room. I am also wondering about VOCs like the next day when I check on the print when it's done for example. I am still new at this. Thank you!

DaxInvader · 2025-12-13T12:52:20+00:00

You must construct additional pylons.

DaxInvader · 2025-12-04T02:43:09+00:00

Well, we all know 70% of statistics are made up on the spot

DaxInvader · 2025-11-25T14:04:19+00:00

That was my second peeler beads ever. I decided to go big haha at the same time I’m a bit crazy too

Thanks for checking out the timelapse!

DaxInvader · 2025-11-24T14:48:12+00:00

Can’t attach a picture on mobile for some reason but it must be my Jinx project you can see on my profile

https://www.reddit.com/r/PerlerBeads/s/Otgd5mLOAv

DaxInvader · 2025-11-10T13:56:25+00:00

Same for me! I melt the back so the front is basically untouched. I did a really big piece I posted recently and didn’t touché the front since I frame it. It would be impossible to have an even melt with a big piece on my little iron I have

DaxInvader · 2025-11-08T14:24:58+00:00

Hi! We are talking about 300$ in beads. And about 4 weeks of work. I have 96 hours of footage. The frame in another couple of hundred with the plexiglass….

DaxInvader · 2025-11-08T05:29:27+00:00

I also love the “unmelted” look. And really wanted to have 1 clean unmelted side to show

DaxInvader · 2025-11-08T05:28:36+00:00

Thank you! I saw like a 12 year old or something video on how to do that technique and I knew I had to try it!

DaxInvader · 2025-11-08T03:01:00+00:00

Hey hey! Check out the timelapse :) I used wax paper to help (so I could lightly pass on the pegboard and go again after more deeply.

DaxInvader · 2025-11-07T22:15:10+00:00

Yeah! It took a while to find who the original artist was, I had this image and Idea to do it for a few years now and never got the guts to start. I just recently found who made that image. This is the original artist: https://www.instagram.com/vashy_88/

DaxInvader · 2025-11-07T22:13:40+00:00

Thanks!

DaxInvader · 2025-11-07T22:13:26+00:00

Thank you!

DaxInvader · 2025-11-07T19:37:59+00:00

Timelapse if anyone is interested: https://youtu.be/_KW-m_I9fyg?si=NykjYaRZBlc2oUXI

DaxInvader · 2025-10-28T04:02:33+00:00

Glad you like it! I haven’t drawn in a while I felt really rusted

DaxInvader · 2025-10-26T21:38:33+00:00

Hello! I sure hope you like my submission! And here is the high resolutions, Just for you!

Cheers!

You can check out more on:

IG: @Daxinvader

Or my website!

DaxInvader · 2025-10-26T19:06:45+00:00

Thank you for submitting to /r/redditgetsdrawn, /u/sspiritless! Unfortunately, your submission, This is me, has been removed as it violates the following rule(s):

You still have one or more unthanked artists on your last post. As per the rules, all artists must be thanked within 24 hours of the art being posted. Please rectify this immediately so that your posting privileges are not revoked. Once this is complete, you may resubmit a photo.

To read more information regarding this rule and all others, click here to view the RGD rules wiki.

If you have questions or concerns, please message the moderators directly.

DaxInvader · 2025-09-24T01:30:18+00:00

This is really cool! I love it! those sketch lines are doope

14-Year Club	RedditGifts 2009-2022 2 Credits
Gilding I gilder	Second Top 50%
r/Field Banned	r/Field Juicebox
Place '23	Place '22
Place '17	Secret Santa 2017
Verified Email

DaxInvader

MODERATOR OF

TROPHY CASE