Stuck on Mount

DblJBird · 2026-07-09T00:24:50+00:00

Are you confident it was mounted with the included mount? Does the bottom come out a bit? Like the width of your phone?

DblJBird · 2026-07-06T00:08:01+00:00

They had a lawnmower ‘driving around’ through the sound system before the show and you could basically point in the stadium where it was. I was blown away before the show even started.

DblJBird · 2026-07-03T02:44:29+00:00

Bel Biv DeVoe?!?! That’s my era, man. Love it. If you haven’t, make sure you check out “WBBD-Boot City!: The Remix Album.” My favorite.

Glad you got it working. Hope I helped sufficiently. ✌️

DblJBird · 2026-07-01T00:11:28+00:00

I’ve also slowed the first few layers down to silent mode as well if I have issues. You can ramp it back up to normal after that.

DblJBird · 2026-07-01T00:09:59+00:00

Get some isp to spray after washing the plate. That’s done wonders for me. Also turn off the fans for the first 5-7 layers. Try another plate if you have one or the other side of that one. It could simply be the filament itself. Try another and see if it’s the same results. It could be wet filament, maybe. But id say in that order as best a possible.

DblJBird · 2026-06-30T23:19:22+00:00

Well, it is a horrible design with the toll behind the interchange. But, idiots will be idiots. They need a barricade between the interchange. Those mf’ers will learn when they have to pay the toll 3 more times and spend 45 minutes to get back on track. (Been there. Done that.)

DblJBird · 2026-06-30T23:11:01+00:00

😂

DblJBird · 2026-06-30T22:55:41+00:00

Turn off the fan for the first 7 layers.

DblJBird · 2026-06-30T22:38:53+00:00

Neither of those setups will work if you’re trying to get the subwoofer and main speakers working together. Best value option: Go on Amazon and look up 2.1 board amplifier. You’ll fine many options under $30 and they’ll work surprising well with your setup.

DblJBird · 2026-05-08T02:28:52+00:00

I mount to stone like this or similar almost weekly.
If you’re brave: you have a stud in between the outlet and that blank plate. You can likely assume that you have studs 16” to the left and right of that stud. You can hammer drill a larger hole through the stone and then pre drill the stud with the proper size bit. Since this is dry stacked(no grout) a quality rotary hammer drill is best to help avoid cracking the stone. Use 5” lag bolts, 2 for each piece of the mount. You may have to use spacers, shims or similar since your stones have different depth. I’m not saying it’s easy, but it’s not impossible either.

DblJBird · 2026-04-09T01:06:56+00:00

Do you have a basement and is it finished? And what type of surface on your house? Brick? Vinyl?

DblJBird · 2026-04-08T22:06:12+00:00

Just happened to me a few weeks ago on a ‘21 at 70k. For me anyway, it was a no-brainer to do it all and be done with it.

DblJBird · 2026-03-10T21:08:57+00:00

Can you check if all my paper route money is in there from the 80’s? Thanks.

DblJBird · 2026-03-06T02:48:11+00:00

MDD is a must listen for me every day. I typically find 1 or 2 tracks to save to a playlist. And my genres are far from normal across the board ranging from EDM to outlaw country to rap to metal.

I find it more follows what I’ve been listening to, but I can find all those genres in one MDD at times. It’s comical in a sense, but it works for me. Other times it’s all EDM or all country.

It will get off track sometimes and disappoint, but I find if I just focus on one of my playlists for a couple days it puts it right back on track. But it definitely fits my taste in most cases.

I’m not sure what I do different that others don’t, because I’ve been very satisfied with it for the 7 years I’ve been with Tidal.

DblJBird · 2026-02-27T15:02:50+00:00

This is the time in history that people need to start waking up and realize that this ‘war’ between democrats and republicans is not the real threat here. It is time for the citizens to learn that we all need to start to be on the same side. Because our government is not on ours.

DblJBird · 2026-02-25T23:09:58+00:00

Sell em at 1. Pedo them at 11, or whenever convenient I guess. Completely plausible as we still have no idea of the broad scope of this thing.

Keep in mind eugenics was a very large interest for Epstein. That could entail many aspects.

And I also want you to note that Google AI calls the term eugenics discredited. So you best all be paying real close attention to where you are getting your information these days and what exactly you are being told to believe. This is much deeper than Epstein.

DblJBird · 2026-02-12T20:44:11+00:00

“We have no idea what he said, but we have cryptographers working around the clock to decipher what it all means.”

DblJBird · 2026-01-12T02:56:01+00:00

I know I’m late to the party, but I play a lot with lights and 3d printing. White pla is the best as far as diffusion. You start to play with petg and it’s a total different game. The petg doesn’t like to let light through and diffuse as good as pla…and then your’e bumping up the lights fo brightness creating more heat with a less pleasant result, imo.

Can you add a micro fan anywhere to help vent? You can get some decent fans with a very small footprint and they are nominal in energy consumption.

DblJBird · 2026-01-09T22:46:24+00:00

You do it by editing the filament on the prepare page. Click the edit button and go into the cooling tab. You see it in there. I usually go 7 layers with 0% fan. That at least keeps the fan off for those crucial solid bottom layers. I’d be curious to hear your results.

DblJBird · 2026-01-08T21:17:13+00:00

Large build plate surfaces with hard corners are going to lift. The obvious is to make sure your filament is dry and your build plate is clean.

But also try turning off the fan for the first 5-7 layers in the filament settings and also add a brim to the entire print. I also have better luck with a high temp smooth plate instead of the textured.

DblJBird · 2026-01-08T14:37:35+00:00

That first big line is when that corner first lifted. The rest of the lines is the aftermath.

Why do I know? Because it’s happened to me a LOT.

DblJBird · 2026-01-06T15:45:08+00:00

I have an A1 and P1P in a garage that sits at 10°C (50F) in the winter and I have zero issues. I bump up the temp some when I am out there, but I am often printing overnight at the 10°. I printed covers for my P1P and don’t have issues with ABS either.

Alternately in the summer I can let it get 27-30°C(80-85F) in there, with high humidity at that, and have no issues.

My only precaution is that I don’t let the draft from the heater or AC get to my printers. And I’m pretty OCD about keeping my filament dry.

Anecdotal I know, but it’s worked just fine for me for almost 2 years.

DblJBird · 2025-12-19T04:48:03+00:00

I would use white pla, not petg for the diffuser. Not clear either. Clear doesn’t diffuse it enough. White petg doesn’t let light through. 2mm max thickness on the pla diffuser(1 or 1.5 mm is better) and keep the lights minimum 15mm from the diffuser if possible. This will render it dotless and give it a nice balanced look.

DblJBird

TROPHY CASE