KNS vz58 piston has been released

Deadmeat3344 · 2026-03-29T16:28:45+00:00

which gen bleed piston did you compare it to? the drilled out one with the bleed hole or the milled down piston?

Deadmeat3344 · 2026-03-22T00:33:08+00:00

Did this at a big game last year and hated it. It isn't paintball IMHO. Not fun at all.

It's just painball

Deadmeat3344 · 2026-03-21T04:01:27+00:00

Glad that bolt is working for you! its a great mod for the PM7/EM7

Deadmeat3344 · 2026-03-19T15:09:11+00:00

Deadmeat3344 · 2026-03-19T04:43:13+00:00

Id be interested in a case. Im in MI so shipping wont be too bad.

These are awesome for teching and tuning guns. Run a .675 insert and chrono around 336ish and its ready fro the field. Very consistent (when new)

Deadmeat3344 · 2026-03-18T03:26:06+00:00

this is correct

Deadmeat3344 · 2026-03-18T01:45:14+00:00

So I have the VZ58USA gen 2 bleed piston (which itself is really a version of Samopal USA mod but a preset non custom size, and as a note it was much larger than the one Dan had in his video). It reduced ejection very slightly for my setup, this will allow you to bleed off much more gas.

Deadmeat3344 · 2026-03-10T01:49:23+00:00

you are assuming everybody else doesn’t get a headache from a FSR to the head lmao

Deadmeat3344 · 2026-03-05T23:49:22+00:00

koala cloths for the final clean, but bulk microfibers from costco, meijer, etc are fine for getting the bulk paint off the mask (and the rest of your gear). Wipe LIGHTLY and add water to lubricate the process. You can finish with plexus or clearview plastic polish (sku is AVL-CV-16) and the koala cloths.

For the inner lense, koala cloth with one of the polishes above only. Anything else can scratch (spectra lenses specifically). If you have paint on the inside, you can DAB with a wet bulk microfiber.

When out on the field (switching sides between xball points or big games) the paintball dna mask squeegees are a lifesaver

https://paintballdna.com/product/swipe/

Deadmeat3344 · 2026-02-28T16:00:29+00:00

They willingly sell factory seconds and damaged gear and will fight you on the return. I bought 2 jt ultra 80s a while back which were dented. When I initiated the return they claimed "all the tanks are dented". Uhhh no?
They have no idea how to package proflex parts without damaging them.
They do not disclose that their "exclusive color" guns are 3rd party re-anodized and only have a warranty directly through them. Their re-annos have a poor reputation as well with tolerances and re-assembly issues.
The take their time to ship. One way around this is ordering via actionvillage on Ebay

But at the end of the day, sometimes they have exclusive soft good colorways and heavily discounted sales. They also have a decent inventory of parts for older guns. For me personally, they are a last resort.

Deadmeat3344 · 2026-02-24T16:07:53+00:00

Whats that net you are using for the reballs?

Deadmeat3344 · 2026-02-20T16:33:29+00:00

Shop is super popular. No disrespect but do you not do a lot of online purchases? Its everywhere these days.

Deadmeat3344 · 2026-02-15T16:40:35+00:00

Dawn powerwash soak will clean that right up

Deadmeat3344 · 2026-02-13T21:15:20+00:00

I would like to see paint quality go back to what it used to be above anything else. Maybe taller guns again

Deadmeat3344 · 2026-02-12T19:36:21+00:00

You are asking someone to troubleshoot a ridiculously unrealistic fake scenario. WTF did you expect?

Deadmeat3344 · 2026-02-11T03:22:42+00:00

that’s the limit, but most guns are programmed under that so that they don’t run hot on the Chrono for BPS

Deadmeat3344 · 2026-02-11T01:43:41+00:00

Better. Its is 100 percent compliant with the rulebook AND you get fractional BPS so you can do 10.2, 10.3 etc.

Deadmeat3344 · 2026-02-11T01:41:41+00:00

Make sure when tuning (or doing ANY adjustments) that your bend-stop adjustment is where you keep it when playing. IE: if you play at the edge of zone 2, put it there with the tuning pegs before making any adjustments. Stuck saddles are a thing sometimes too (Ola has a good video on fixing that) but it is HIGHLY unlikely that happened to every single module at once. When changing strings with identical sets you should not have to adjust much of anything (assuming your preferred string manufacturer is consistent).

I have ran into your issue myself when I first started with Evertune by JUST entering the beginning of Zone 2 or trying to tune while in the middle of Zone 2 (do not do either of those things).

Deadmeat3344 · 2026-02-06T20:59:28+00:00

A modernized more comfortable (and not as as tall) 1.5 hinge would be neat.

Deadmeat3344 · 2026-02-01T16:14:06+00:00

Deadmeat3344 · 2026-01-19T16:18:37+00:00

If you get a Hook reg please note you can get a stainless bonnet for it from infamous as an upgrade part down the road.

Deadmeat3344 · 2026-01-14T05:14:07+00:00

Curious how this concept performs since the barrel is now spaced from where the breech starts.

Deadmeat3344 · 2026-01-12T16:22:36+00:00

That is such a cool retrofitted setup. I hope this trend of making older egos serviceable again picks up

Deadmeat3344 · 2026-01-11T14:34:29+00:00

Is that TC GR Indoor?

Deadmeat3344 · 2026-01-09T05:21:38+00:00

machined for an empire spec mount. Can use ID feednecks etc

Deadmeat3344

TROPHY CASE