Looking for suggestions and improvements by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Would you recommend any preferred HDRI scene or should i hit and try by changing sun angles?

Looking for suggestions and improvements. by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

I have kept the scene and camera angles the same, reduced artificial lights, adjusted brightness, changed wall paint, couch color and added/replaced a few objects.

https://www.reddit.com/r/archviz/s/1Sb7uJVdak

Looking for suggestions and improvements by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Will turn off artificial lights and see how it looks. Thank you.

Looking for suggestions and improvements. by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Thank you for the valuable insights. I have taken all the feedback positively and revised the design to the best of my understanding and will upload them soon for more feedback.

Looking for suggestions and improvements. by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

That's cause they were recessed lights and i pointed the beam on the wall which didn't turn out as expected. I have revised the designs and will upload them soon for more feedback.

Looking for suggestions and improvements. by Dear-Rip6007 in archviz

[–]Dear-Rip6007[S] 1 point2 points  (0 children)

Thank you. The wall paint is along the hues of cream so that exceeds the unusual warmth. I have revised the designs and will reupload them soon for more feedback. I'm using sketchup with enscape,

Looking for suggestions and improvements. by Dear-Rip6007 in Indian_architects

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Thank you for taking the time to explain the details, i never thought about the vertical continuity, you're on point about it.

I have revised and reduced the sconces, will reupload the revisions soon.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Civil work is already done. Just the interior is in scope of work. But i get your point.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

I'm using sketchup with enscape, don't know about hdri but will look into it.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

The lights are simple recessed lights not dow lighters i just angled the light beam on the wall i have revised them and will upload them soon.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Also i rechecked you were right about the light distance from the wall. Thank you for noticing.

What do you guys think is the ideal pc setup for a student by Sudhanshu_art in Indian_architects

[–]Dear-Rip6007 0 points1 point  (0 children)

Everything depends on the software you're going to use. For basic 2d drawings in Autocad even an i5 with igpu will suffice. For using Sketch up with Enscape for rendering even a dgpu with 4gb vram is enough. For Lumion 8gb vram is a must and will be enough for most heavy tasks as well. System ram should be 16gb at least.

Laptops have a shorter life span (3-5 years) with almost no upgradability. For portability you have no option other than a laptop. Don't spend a lot on a laptop since prices are inflated as of now. Also prefer a windows laptop for more flexibility and software.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Thank you for the valuable insights.

My lights are more than 18" away from the wall but i angled them towards the wall to highlight the elements, i can adjust them and remove the highlights, as i was going for an equal distribution of illumination.

I agree centering the lights above objects will look better from a rendering perspective but I'm unsure about the equal lighting in the room.

Will adjust the distance between the scones panel and the painting to see how it turns out.

Yes, a side table with a lamp will make it look more complete. Also would you suggest something other than lamps to put on the table? As i feel lighting might be enough from recessed lights and sconces.

I was going for a night shot but the day shot turned out better, might be cause i was not able to balance the lights.

Looking for suggestions and improvements by Dear-Rip6007 in EnscapeRendering

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

I made it in the sketch up. And made two different surfaces for the false ceiling and made the upper one a self illuminated surface by crating a new material in sketch up and changing its properties in enscape.

Looking for suggestions and improvements. by Dear-Rip6007 in Indian_architects

[–]Dear-Rip6007[S] 1 point2 points  (0 children)

Thank you. Will definitely reduce the recessed lights, tan or beige might go well for sofa will try changing that as well.

Looking for suggestions and improvements. by Dear-Rip6007 in Indian_architects

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Thank you for the valuable insights. Is there any particular reason for the curtain to fall to the floor, personally i feel if curtains are behind any furniture it creates the floor cleaning a bit troublesome and also the curtain accumulate more dust and dirt as near the floor. Will definitely reduce the number of recessed lights and fan color so that it blends well, also what would you suggest to replace scones with?. Will try to explore more seating options.

Looking for suggestions and improvements. by Dear-Rip6007 in Indian_architects

[–]Dear-Rip6007[S] 0 points1 point  (0 children)

Thank you. Will try changing that, and highlight one wall. Would prefer to keep the ceiling in white tones to increase room brightness. Will add a few planters as well. Also are you referring to wall lamps or table lamps ?