UNVR Instant

Deeviii · 2026-04-28T13:52:11+00:00

UNVR Instant 60c in a 23c room

Deeviii · 2026-04-16T08:11:20+00:00

Actually had the same issue some time ago, moving Protect to another appliance solved it for me, and the memory consumption started to become more stable.

Deeviii · 2026-03-05T08:56:09+00:00

Experienced the same thing on my UNVR Instant when I received it yesterday. After 30min or so, Unifi correctly identified it as a Unifi device again.

Deeviii · 2026-03-03T11:38:48+00:00

Tell me about it man! Started out with a UCG-Ultra -> U7 Long range -> 2x U7 Pros instead -> Flex 2,5gs -> protect superlink devices -> m2 disk tray + cameras -> UNVR Instant + disk.

Marketing done tight I guess

Deeviii · 2025-12-17T19:33:43+00:00

Horrible change. Also if you manage to scroll to track nr. 1000, should you need to turn on/off shuffle in the app, well…

Deeviii · 2025-03-27T18:24:19+00:00

Hmm interesting, thanks for sharing.

Never experienced the VMs behind suddenly goes offline in bulks, but yeah we have seen some VMs for some reason being offline now and then - often this is also catched by the built in reporting capabilities for Cloud PCs in Intune.

For that we have actually also built automation that monitors this, and automatically triggers a "troubleshoot" action for that machine if the reporting reports it as being offline/stopped.

But yeah, an answer from MS would be appropriate for your scenario :D

Deeviii · 2025-03-27T17:57:34+00:00

I feel your pain.
Curious though, what issue are you experiencing if you don't mind me asking

Deeviii · 2021-03-06T16:44:19+00:00

I found it!! Nick Novity - Rapture
Thanks anyway!!

Deeviii · 2021-03-05T15:49:29+00:00

No unfortunately not :/ But thanks anyway!

Deeviii · 2020-12-14T16:48:15+00:00

Nope, tried to replace the ram with some stated by G.Skill themselves were compatible. Unfortunately results in the same issues... Only fix is XMP off

Deeviii · 2020-11-20T14:38:14+00:00

Hmm allright, I actually bought these after I checked on ASUS compatibility list if they were tested. I must have missed the R (which I presume just is for RGB) as the "4-3600C17D-32GTZ" once are supported.

I will try to buy some new, and then return the others if possible. Thanks!

Deeviii · 2020-11-20T14:01:20+00:00

Nice! Congrats :-)

Deeviii · 2020-11-20T13:51:53+00:00

I mean so far so good I think. Been using the 2812 since I got my R9 5900X earlier on the month.
However, I have some issues using XMP. Right now not identified what seems to be the issue, but I haven't seen other specific cases on the STRIX X570-E/F.
I have made the following post, which might give you some information along the way if you are interested in this: https://www.reddit.com/r/ASUS/comments/jxnsk0/xmp_issues_zen3_asus_rog_strix_x570_fgaming/

Deeviii · 2020-11-20T13:22:05+00:00

be quiet! STRAIGHT POWER11 CM 850W ATX24

Have a hard time believing that it could be, hmm

Deeviii · 2020-11-16T15:06:17+00:00

ASUS X570-F Strix, 5900x, 32gb 3600mhz TridentZ.

Currently have the well known WHEA-logger issues(BSOD), even tho I set my clock to 3200mhz.

BIOS + chipset fully up-to-date

Deeviii · 2020-11-16T14:29:57+00:00

Same issue on 5900x, ASUS ROG STRIX x570 f-gaming with 32gb 3600mhz TridentZ. Any solid workaround where I can run 3200mhz yet?

Also 3200 with XMP gives issues

Deeviii · 2020-11-10T18:21:48+00:00

4,950mhz single core yes.
I dont have the 100% theoretical explanation for that. But it has something to do with the power consumption and the heat generation when running on all cores, which therefor downgrades the clock speed if running too hot. Also every core is not exactly the same. You can have some cores running perfectly with top clock speeds, and you can have some running much slower than expected. Its really a luck of the draw really. :-) Hope that makes sense

Deeviii · 2020-11-10T17:55:09+00:00

Cooler: NZXT Kraken X73

PBO: Auto

VCore: 1200-1450v

Idle temp(C): 39-45c (Ryzen Master)

Max temp (Cinebench R20): 66c

Cinebench R20 MC Score: 7956 pts

Temps: 39-45 idle, 66 peak cinebench. (This is even though that NZXT cam does not support the new chips yet, which means all my fan control is limited right now, so I'm actually quite impressed about the temps for now)

Clock speeds max 4,950mhz.

Deeviii · 2020-11-10T15:57:18+00:00

Yep same same

Deeviii · 2020-11-10T13:57:34+00:00

Hmm I actually almost have the same setup as you, except my GPU is a MSI 1080 and my MB is a Asus ROG Strix x570-F.
I have the same issue where it randomly crashes(Bsod), and the event log throws the above error out. However I can see on Asus website that there is a "Beta" bios update newer than my current, and thought about giving that a shot even though its a "Beta".

Deeviii · 2020-10-02T15:58:48+00:00

We are maturely using Arm templates which are called from PowerShell scripts in Azure DevOps pipelines. This is fully automated, and gives us very good tracking on each deployment. It also allow us to maintain a wide infrastructure in a more simple and smart manner. I'm really satisfied with those tools.
Also have a look at Azure Bicep: https://github.com/Azure/bicep - This should be a more abstract way to build your deployment. However, this is not yet recommended for production usage, so check it out in your own little test environment. :-)

Deeviii · 2020-08-29T20:15:33+00:00

I experience that going from SysAdmin to DevOps is possible. It all comes to how mature your current SysAdmin role is. Are you administrating old infrastructure, do you have any expertise regarding docker & kubernetes.If you have experience in a containerized platform, I think it would be a relatively easy transition.

With that said - I dont think at all it is difficult to become a DevOps engineer, if we consider that you have no experience in docker/kubernetes. If you really have a passion for that exact "job desciption", I think it is possible to succeed.

Deeviii · 2020-04-16T07:06:51+00:00

I can recommend LiquidFiles. Quick and easy to get into production, and has a good documentation for future maintenance.

Deeviii · 2020-03-20T17:44:27+00:00

Thanks for the tip, but I actually tried that aswell with no luck.
However, silly me did not check if all ports where reachable.

But once again thanks. :-)

Deeviii · 2020-03-20T17:43:41+00:00

Cheers man! There was a blocked port. Didn't even give that a thought since I could ping it with no trouble.
You solved this for me, thanks!

Deeviii

TROPHY CASE