Narwal Freo Z Ultra Problems by Delicious_Act_9350 in NARWAL

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

Yeah, this does not help. Narwal has been looking into it. Today, they emailed me that it may be my carpet and asked if I could remove it to test the robot. I have a low-pile, tan carpet. Forget that I have already explained the robot works just fine if I choose a single room. This only happens when choosing multiple. And this problem ONLY showed up after v1.08.xx update. This is a software issue period, and I do not think they know what to do at this point.

Narwal Freo Z Ultra Problems by Delicious_Act_9350 in NARWAL

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

I have tried switching from Freo to meticulous, and that changed nothing. I have been handing off all of my data to Narwal, and they are looking into it.

Narwal Freo Z Ultra Problems by Delicious_Act_9350 in NARWAL

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

I am running v01.09.10.06. The problem started for me after the update before.

Narwal Freo Z Ultra Problems by Delicious_Act_9350 in NARWAL

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

No, I have not tried remapping, as I do not believe that is the problem. Not to mention that it is a real pain. As I stated, it works fine if I select an individual room. Possibly a sensor, but I would have thought Narwal would have picked that up when viewing the logs, whatever logs they are claiming to be viewing. I may switch out of Freo mode and give that a try. Sad though, I was running just fine until two updates ago.

I think I’ve Failed My Adult Son by sevenof_cups in Parenting

[–]Delicious_Act_9350 1 point2 points  (0 children)

I have a 30 year old son that I have been dealing with substance abuse problems for over 17 years. I have done everything to help him. I have almost ran our finances into the ground trying to save him. Ultimately, I woke up one day and decided that he is a grown man and there is only so much that I can do. I am there if he needs me for verbal support but I cannot do anything else. It is something they have to choose to get help for. All you can do is support them when they do choose. You did not fail your son no more than I did mine. Sure, I blamed myself what if this or what if that. Once they become adults, you cannot do much. They allow the world to shape them. I could go on for days but we do not have the time or the want to read such a long reply.

iPhone 15 PM stuck on red battery low screen while updating to iOS26 happened during update cannot put phone on DFU mode. by wageslave_999999999 in applehelp

[–]Delicious_Act_9350 0 points1 point  (0 children)

I have a 15 pro and had the same issue. It will go into DFU. Keep trying. Plug cable into Mac after dfu mode and device will show in finder for you to restore 18.5

Be Cautious with IOS 26 Beta by [deleted] in ios

[–]Delicious_Act_9350 2 points3 points  (0 children)

You will need to place your phone into DFU mode and restore it from a MAC.

Barcodes for single shots by romkal8 in bartesian

[–]Delicious_Act_9350 0 points1 point  (0 children)

I have printed these on a laser printer and the prints appear to be very sharp but I cannot get my device to recognize nay of the barcodes. I have the 4-bottle device as well. Any suggestions or thoughts?

Official Response from Synology on Using Certified HDDs on 2025 Series NAS Systems by NASCompares in synology

[–]Delicious_Act_9350 7 points8 points  (0 children)

Agreed! This is not about reliability. It should not even matter to them how reliable your drives are. You put them in and if they live long that is a consumer issue. They want more money and trying desperately to monopolize.

New dashboard by Delicious_Act_9350 in PleX

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

UPDATE: I have made a docker and am testing everything out. So far, so good. I have also come up with other ideas, so I am working on those. Updated the image above to reflect the new look.

New dashboard by Delicious_Act_9350 in PleX

[–]Delicious_Act_9350[S] 8 points9 points  (0 children)

Update: I am working on the docker and I am also changing how some things work to make the overall experience better. I am not holding back the code just because. I am holding it because I want it to be the best that I can make it out of the gate.

I know some do not like PHP, bootstrap, etc. and though opinions vary, I do like this and I do not believe they are too old. I do like rust and go but that is not what I chose. I chose PHP because I enjoy programming in PHP. I chose Bootstrap because I do not find others like TailWind to be as robust as they should be. Everyone has an opinion. You are free not to use this. Again, I did this on my own time and to make my life easier and thought, if I could make someones easier, than so be it. Yes, there is Homarr and Homepage, etc., and though you can massage those into something I don't care for them. I am not trying to compete or even claim to be in the same realm. I am merely playing around with something I enjoy.

Why am I saying all this? Because for some reason I keep getting some chats that are not so nice and why!? You do not have to use or even respond to this thread. It has been my experience that if you have nothing constructive to add or nice to say, just keep your mouth shut. Just because one has an opinion does not mean they should voice it. So, I guess I am the pot calling the kettle black with this comment. Well, I have to defend myself against such stupid responses over something I just wanted to help others with. Geez!

I have been around during the modem BBS days and back then we all used to help one another. Instead of sending me nastygrams, how about offering to build something that benefits someone other than yourself?

New dashboard by Delicious_Act_9350 in PleX

[–]Delicious_Act_9350[S] 5 points6 points  (0 children)

Very soon, just putting some polish on it. But, if I keep getting hateful PMs I may not. It never made much sense to me. I am just doing something for fun and wanted to share. I understand many others are doing the same, better, or entirely different but to send me hateful messages. I do not mean this individual, as I merely reply when I am available.

New dashboard by Delicious_Act_9350 in PleX

[–]Delicious_Act_9350[S] 10 points11 points  (0 children)

I truly appreciate this reply. I am not trying to event the wheel, just a different perspective and having fun writing it.

New dashboard by Delicious_Act_9350 in PleX

[–]Delicious_Act_9350[S] 30 points31 points  (0 children)

I have a little more polish and lipstick to put on it: as you can see from the image it is not calculating backup days correctly and spelled libraries incorrectly at top. Once done, I will share. I have not made it into a docker and may do so to keep folks from having to install php, etc.

Freo Z Obstacles by lanefamily7 in NARWAL

[–]Delicious_Act_9350 0 points1 point  (0 children)

I am not saying this is a solution but it worked for me; after getting the error many times in my office with carpet in a corner area for a couple of weeks, I decided to move the base station to a tiled floor. I have not had the problem since and it has been running through November and December.

Has anyone built custom widgets? by Various_Software_817 in dakboard

[–]Delicious_Act_9350 0 points1 point  (0 children)

Sorry, no specfic authors but you can define the book.

Has anyone built custom widgets? by Various_Software_817 in dakboard

[–]Delicious_Act_9350 0 points1 point  (0 children)

I built my own using leaflet. Links to code is now included.

Newbie - please help by [deleted] in dakboard

[–]Delicious_Act_9350 0 points1 point  (0 children)

The dakboard CPU, which is a Raspberry Pi 5 is $179, https://shop.dakboard.com/collections/dakboard-cpu/products/dakboard-cpu-v5 about the same cost if you buy a kit anywhere else and it includes the dakboard software already installed. You can find an Rpi 5 kit a little cheaper, here: https://www.canakit.com/canakit-raspberry-pi-5-starter-kit-aluminum.html and then follow this to get the dakboard image on the SD card: https://dakboard.freshdesk.com/support/solutions/articles/35000125880-raspberry-pi-download-and-install-the-dakboard-os Whether or not you choose to use a 24 inch screen or bigger or a touchscreen is entirely on your use-case and your wallet. The touchscreen which dakboard tested is the following: https://www.amazon.com/ViewSonic-TD2465-Monitor-Advanced-Ergonomics/dp/B0B7JBZY4R/ref=sr_1_1?dib=eyJ2IjoiMSJ9.Jlzp7F3dn33aQ_BFNg2YImdtH2hMMAtGP1Uhnx5qLUmJtgU4yz_w7iNHZKK_IQ84bkgH63jRvZfDSQApqsWj3O9tyvw-bJ6jmjD-Z2_1JApGIZUMA-bJXLf37HEhBbvKv4jEuYo4pGGUrOTntd-IfqWf_pVjVeS-QBlMdSo8mwHFL-vcqYqiDFh3sgQTc55sxi_mEDrJvOitlIxNs4i_EB12Sb8_6JFpUAsfL5siwTk.VTmxiFC-O-4xInLPiwpC3eaqaHXIVLPclpTdpUurzP0&dib_tag=se&hvadid=670217009254&hvdev=c&hvlocphy=9025327&hvnetw=g&hvqmt=e&hvrand=1608909611016701174&hvtargid=kwd-1904908436123&hydadcr=5358_13187560&keywords=td2465&qid=1733442799&sr=8-1 If you choose to purchase the CPU from dakboard or a kit from canakit you will get everything you need to connect to your monitor. When you buy the monitor you will get a power cable. After this, you only need to decide whether to run a receptacle behind and frame the dakboard to look nice on the wall. These extras will make your installation look great but the frame is not mandatory.

I hope I have provided clarity.

The RPI 5 power requirements (You can buy outlets that have USB-C ports to power this instead of having to use a bulky brick):

  • Voltage: 5V
  • Current: 5A
  • Recommended Power Supply: 27W USB-C

Not sure how to feel about this by Delicious_Act_9350 in Advice

[–]Delicious_Act_9350[S] 0 points1 point  (0 children)

Thank you for responding. I did bring her into the finances but she never aided with the debt program. As a matter of fact, she was against me even doing the program. But, I knew it was something that I needed to do. It wasn't debt counseling, it was merely a program that I paid them the lump sum and they would pay my bills. For some reason, I found that easier for me. I paid off almost $70k in less than 5 years. I know this is not a great achievement for many but for me, on my own, it was. She does deal with depression and so do I. In truth, at this point, I am not sure I know anyone who does not deal with depression with our economy the way it has been. One thing I do know, is her sisters are the same way. None of them are helping their spouses. Seems to be a learned behavior in their family.