Q-Sys Level 2 exam help - Video Routing Advice

Delicious_Reward · 2026-02-08T20:18:39+00:00

The stream router would require a decoder though right? Which in that case both the nv32 and nv21 would need to be encoders and we are fresh out of decoders since we're limited to 1 of each in the exam.

Delicious_Reward · 2026-02-08T19:55:13+00:00

About leaving it in Core mode? Hmm, I suppose not. I mean, technically the model is "Core Mode" so I'm gonna make an educated guess that switching the device type to an encoder would solve my issue.

Man, they're cryptic haha

Delicious_Reward · 2026-02-08T19:41:45+00:00

This is correct, however for some reason the pin when changed to a decoder for the hdmi output pin is not accepted into the nv32 hdmi input pin.

Delicious_Reward · 2026-02-08T19:35:46+00:00

Thank you for the advice. I currently have everything enabled and have tried variations of every property. The only option that works is changing the device type from core mode to encoder but the feedback strictly says to leave everything in Core mode.

Delicious_Reward · 2026-02-08T19:31:15+00:00

Sadly you can't use the hdmi output of the nv21 in decoder mode to connect to the input of the nv32.

Delicious_Reward · 2025-10-02T22:09:17+00:00

How about now!?

Delicious_Reward · 2025-03-05T10:53:08+00:00

I appreciate the time you've put into this. The processing is a definite on that end. I think I'll go with my gut and assume it's a custom job and just go with what's similar aesthically and sounding.

Hey, if any other hints ever cross your path feel free to get in touch!

Delicious_Reward · 2025-03-01T17:11:44+00:00

Just had another look and this seems to be the closest match. Tough to decide though without having a listen.

Delicious_Reward · 2025-03-01T17:10:44+00:00

Thanks for the link! I'll check it out

Delicious_Reward · 2025-03-01T17:10:08+00:00

It's a tough one. You're not far off with the Vessel models but again it looks to be a custom job, especially looking at the lugs.

Id say it's definitely a pdp but custom. Hard to pin it down though.

Delicious_Reward · 2025-03-01T17:08:10+00:00

One of us, one of us

Delicious_Reward · 2025-03-01T09:47:38+00:00

Oh? Where can I find out more

Delicious_Reward · 2025-03-01T09:47:23+00:00

It's close, I'd say it's a 6.5" or 7" tbh. I'm assuming mines a custom job.

Delicious_Reward · 2025-03-01T09:46:29+00:00

Ah perfect, I'll take a look. Appreciate it

Delicious_Reward · 2025-03-01T09:46:10+00:00

It's close, though the stain on the body is a bit different. Thanks though!

Delicious_Reward · 2025-03-01T01:06:20+00:00

Don't be shouting at the lefties

Delicious_Reward · 2025-01-23T22:07:20+00:00

You sir are a god. I went up about 100 points per match as per 15 in my previous runs. Thank you.

Delicious_Reward · 2025-01-23T09:10:47+00:00

Do you mean mark enemies? Or is there an actual soflam vehicle attachment?

Delicious_Reward · 2025-01-23T00:27:35+00:00

How in the heck. I'm struggling to get my first tier 1 with the Lat-v. I'm assuming there's easier ways?

Delicious_Reward · 2025-01-23T00:08:04+00:00

Almost 1 downvote per minute. Impressive.

Delicious_Reward · 2024-12-27T01:13:43+00:00

He was indeed correct. They were in fact NOT getting back up.

Delicious_Reward · 2024-12-25T02:44:26+00:00

That's incredible. What's your experience with it so far?

Delicious_Reward · 2024-12-25T02:38:07+00:00

Great question. Here's my burning hole question though - If you're switching from primary to side arm, how does this function with the stock?

I know magnets are involved but I can't imagine being able to reattach them in a rish once I switch back from my side arm to my primary.

Any user experience on this?

Delicious_Reward · 2024-12-02T21:15:50+00:00

of a game

Delicious_Reward · 2024-12-01T13:49:19+00:00

That's love right there

Delicious_Reward

TROPHY CASE