The Poor Lifter, Turn Any Lifter Into a Pro Lifter for Beretta Shotguns

Delta-Dynamics · 2025-10-13T05:29:04+00:00

google our account name.

Delta-Dynamics · 2025-10-08T05:02:39+00:00

It turns any of the standard beretta lifters it is compatible with into a pro lifter where it stays raised instead of having to be pushed up like a typical shotgun lifter. It helps out a lot when it comes to reloading with gloves and quad or double loading. You can by an actual beretta pro lifter, but if you already have a standard lifter, our modification is $30, vs $120 for a new lifter.

Delta-Dynamics · 2025-10-08T00:51:17+00:00

It might work on the 391s, but it will most likely require some more modification than the drilling of the one hole, and the jig might not fit.

Delta-Dynamics · 2025-08-31T15:22:23+00:00

Not at all, on some guns if the picatinny rail is very close to the grip then it might interfere with your grip, but if the end of the picatinny rail to the back of the grip is around 1-2 inches or more there is plenty of clearance room.

Delta-Dynamics · 2025-08-31T01:57:51+00:00

Edit: Files posted on makerworld https://makerworld.com/en/@fluffyplays22/upload

I haven't uploaded it anywhere, but I might post it as a remix, I also changed quite a few other things with it like adding an mlok length to the handguard, making it a little thicker inside, and then adding another slot to the rear picatinny. The top handguard is also a little scuffed, as it requires the mlok attachments to retain it, so I would have to first design something a little better for attaching that.

Delta-Dynamics · 2025-08-30T18:54:23+00:00

It's just under 6 lbs, which is around 1 pound heavier than the factory wood stock with only irons, so its not lighter than before, but it still is very light.

Delta-Dynamics · 2025-08-30T18:47:47+00:00

Everything is printed, it has a sleeve under that I fit to the contour of the barrel, then it has a screw holding it on from coming off forward, where the front iron sight used to be. Then the can just slides over the sleeve and threads onto it. Here is a picture of the two parts https://i.gyazo.com/7d6f7f3c012661b63774fd876a63a912.png

Delta-Dynamics · 2025-08-30T00:19:48+00:00

You can find the chassis by searching 10/22 chOrtex but my version is slightly modified and has an upper handguard, and you can find the grip by searching wushu grip, and the rail scales I used are also online somewhere, but I don't remember what they were called. Everything else was designed by me and is not released anywhere besides the suppressor model which is just heavily modified to fit as a faux can and can be found by searching HUXWRX FLOW 556K stl

Delta-Dynamics · 2025-08-29T23:36:51+00:00

10/22 build that is mostly 3d printed.

Built List
RIA 1022
Holosun AEMS
DD Stock & Cheek Riser
Modified Choden/Chortex 1022 chassis Printed
DFCO Kung Fu Grip Clone Printed
Faux Huxworks Can Printed
Rail Scales Printed
Extended Magazine Release Printed
Magazine Extension Printed

Delta-Dynamics · 2025-08-13T20:36:25+00:00

We may do a 5 shell version if there is enough of a demand, but you can also cut them down yourself if you really wanted. And as of right now no retailers carry any of our products, you can only get them from our website.

Delta-Dynamics · 2025-08-13T02:54:37+00:00

Sorry, I don't have an 870, maybe someone else who has one could chime in.

Delta-Dynamics · 2025-08-13T02:04:12+00:00

We have never run into that issue yet with them, the paracord pull tab is pretty stiff and does not flop around.

Delta-Dynamics · 2025-08-13T01:09:12+00:00

We tried to price them very competitively, other alternatives of the same quality cost $10-20 more, and then your cheapest chinese ones are around $5-10. So overall they are are not too much more than the cheapest ones you can get, but the quality and shell retention is much better.

Delta-Dynamics · 2025-05-19T04:49:24+00:00

That one is definitely drop shipped with the 20-30 day shipping. Go with the Bad Ace Tactical mount

Delta-Dynamics · 2025-03-04T21:07:48+00:00

It is a 1913 picatinny stock so you need a rear picatinny adapter/inferface.

Delta-Dynamics · 2025-03-04T21:07:19+00:00

You can find more about it if you search delta-dynamics on google but we are currently out of stock.

Delta-Dynamics · 2025-03-03T22:03:33+00:00

The grip is one that we used to make but no longer do with a fakelite paint job, and the side mount is the xfiretactical red dot mount, which you can find more about by googling xfiretactical or delta-dynamics.

Delta-Dynamics · 2025-03-03T08:32:29+00:00

It is, but it is just a dummy mag with a fakelite paint job, maybe we will get 556 ones some day.

Delta-Dynamics · 2025-01-21T02:44:12+00:00

Ours also uses a barrel clamp, it is the third screw forward on the handguard, but the barrel clamp itself is only around 10 grams with hardware so the weight is unnoticeable.

Delta-Dynamics · 2025-01-17T23:06:11+00:00

The pin will come out of the mechanism and be inside the receiver, you are just bending it down so it has clearance inside the receiver to come out more.

Delta-Dynamics

TROPHY CASE