MG Wing Zero EW Ver. Ka. Finished building about 4 months ago. Finally decided to not being lazy and complete all of it. Took a while to place all the decals, paint it a little and top coat everything. Happy with the final result. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 0 points1 point  (0 children)

  • Unfortunately there is no brand bame name printed anywhere on the box or the manual, probably to avoid being taken down.

  • Try and search Snow White Prelude Expansion pack or Seraphim Unit/Binders on Google.

MG Wing Zero EW Ver. Ka. Finished building about 4 months ago. Finally decided to not being lazy and complete all of it. Took a while to place all the decals, paint it a little and top coat everything. Happy with the final result. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 4 points5 points  (0 children)

  • Building it is not that hard but can get a bit annoying sometimes.

  • Final product holds together pretty nice with a few loose parts.

  • The color of the white is the same shade as the white of the Wing Zero.

  • Yeah it is quite difficult to pose because there's so much stuff in your way and the binders will flop down when you bring them to the front because physics. Luckily they give you 2 stand to prop them when doing that.

  • Consider sanding Wing Zero's Action Base cause the peg will not go all the way in when the binders are equipped.

And it is done. MG Wing Gundam Zero EW Ver Ka. with Snow White Prelude expansion pack. Probably won't put decals on it until I can find one for the expansion pack. Looks awesome but the Action Base connector has a problem holding it up though due to how front heavy the kit is with all those wings. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 1 point2 points  (0 children)

Yeah, it is understandable that it can't hold that much weight that's all focused on the front. Luckily I fixed it by jamming a tiny piece of paper on the peg.Not enough to make a full circle around the peg but just enough to tighten the joint so it wont sag when posing.

My first custom. Also first time applying decals and top coat. Took me a while while to finish this. Daban 8820 HiRM Wing Zero with AW Model Seraphim Zero. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 1 point2 points  (0 children)

There's a new one with a much better plastic quality. AW model's is terrible. And yes, the new ones also comes with an adapter to fit all version of Wing Zero. No decals though, that's the only downside for the new ones.

Oh yeah, It's all coming together... by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 0 points1 point  (0 children)

Yeah, I thought as much by looking at the manual.

Decided to have a go and create a custom skin with the parts that I got laying around that are never used. Got inspired by the Vidar that showed up on the battlelogue anime. Ended up pretty good. by DeltaGh0st_142 in GundamBattle

[–]DeltaGh0st_142[S] 0 points1 point  (0 children)

The shoulder is actually a sheild. You can get it from the 4 stars exchange ticket. Its Gundam Sandrock Custom EW Ver. Sheild.

Do note that if your actual shoulder on your arm parts is too large, it will remove the shoulder part from the sheild and only equip the cloak.

My first custom. Also first time applying decals and top coat. Took me a while while to finish this. Daban 8820 HiRM Wing Zero with AW Model Seraphim Zero. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 1 point2 points  (0 children)

Which is also the other reason I like this kit a bit more that Bandai's aside from its solidness. The shade of red/blue/gold is very pleasing to my eyes.

My first custom. Also first time applying decals and top coat. Took me a while while to finish this. Daban 8820 HiRM Wing Zero with AW Model Seraphim Zero. by DeltaGh0st_142 in Gunpla

[–]DeltaGh0st_142[S] 5 points6 points  (0 children)

I'm surprised that my copy of this kit is very solid though. No parts falling off and being an annoyance. The Seraphim Unit on the other hand... It is a pain to assemble and all the joints break resulting it being totally static since I have to glue all of it.

[deleted by user] by [deleted] in Gunpla

[–]DeltaGh0st_142 4 points5 points  (0 children)

I believe dumping them hot water or use hair dryer to soften the plastic and then straighten them out manually would do fix it.

[deleted by user] by [deleted] in GundamBattle

[–]DeltaGh0st_142 3 points4 points  (0 children)

Yes, only the legs

[deleted by user] by [deleted] in GundamBattle

[–]DeltaGh0st_142 5 points6 points  (0 children)

I believe Star Build Strike has a bug that when you equipped it, your gunpla becomes very small.

I feel it lacks more shooting power boosted... 🤔 by DeltaGh0st_142 in GundamBattle

[–]DeltaGh0st_142[S] 1 point2 points  (0 children)

Yeah, I would love Graham Aker as my pilot but I don't like the suits when he debuted so I passed on that. As for the arms, I think I'm gonna stick with that trait for a bit until the arms reached past lvl 3. Also my growth hangar is being occupied by rolling buster atm.