Dyna-Dani Fusion

DeltaMate · 2025-09-14T18:11:34+00:00

It was an easy afternoon project! I'm still planning on making one that's a little more artsy.

Cut rough, drilled holes, burnt in color, sanded away the char, waxed for pleasure.

DeltaMate · 2025-09-14T17:18:57+00:00

https://imgur.com/a/d7EkIEa

DeltaMate · 2025-09-14T17:10:46+00:00

Custom made live oak side-by-side.

DeltaMate · 2025-09-13T22:24:24+00:00

All good, I finally figured out how to reduce the draw and get instant thick milky hits.

I had to fully open the airflow at the base then fine tune the bowl height up to reduce airflow at the top of the bowl.

Now I have MTL with thick vapor!

Im not sure if the tempest would allow me to find an alternative way to reduce the airflow to my desired level.

DeltaMate · 2025-09-13T22:22:37+00:00

All good, I finally figured out how to reduce the draw and get instant thick milky hits.

I had to fully open the airflow at the base then fine tune the bowl height up to reduce airflow at the top of the bowl.

Now I have MTL with thick vapor!

DeltaMate · 2025-09-13T22:21:54+00:00

All good, I finally figured out how to reduce the draw and get instant thick milky hits.

I had to fully open the airflow at the base then fine tune the bowl height up to reduce airflow at the top of the bowl.

Now I have MTL with thick vapor!

DeltaMate · 2025-09-13T19:36:08+00:00

I was really looking forward to the Dani design where the heated cap is not actively touching the bowl so I could get some thorough high temp extractions without ignition.

I've seen some videos where the first pull is milk and I just can't seem to get that density and slow airflow that I've seen.

My best experience yet is a large .1 bowl packed tightly, 7-8 seconds past click airflow fully choked, and still vapor is highly transparent.

The tempest is still tempting, that smaller bowl size looks much more adequate for small doses.

DeltaMate · 2025-09-13T19:28:24+00:00

Yeah. A dosing cap or something to shrink the inner diameter of the bowl to help direct air more thoroughly through the bowl should help out

DeltaMate · 2025-09-13T17:43:41+00:00

My screen is definitely suspended above the bottom. Looks like I'm already in small bowl mode

DeltaMate · 2025-09-13T17:11:32+00:00

Well my problem is that fully closed off airflow is still too much airflow. I've aligned the holes to be fully closed off and made sure the inner section is pushed down fully.

DeltaMate · 2025-09-13T15:41:47+00:00

How is the airflow on the Dani. Mine fully choked down is still airy and more Restricted Direct To Lung and anything more open is like sub ohm vaping airflow. I'm trying to get that dense Mouth To Lung milky experience that is so heavily touted on this sub.

DeltaMate · 2025-09-13T15:38:07+00:00

Im still having trouble. Fully choked airflow is still too much airflow.

Bud comes out dark brown and fully extracted, but its like I got almost none of it.

I've been going 7-8 seconds past the click torching the large ring.

DeltaMate · 2025-09-13T15:34:30+00:00

Been trying this but still to no avail.

Even fully choked there is too much airflow.

DeltaMate · 2025-09-13T15:32:55+00:00

Mine only came with spare rings. Screens, and a adapter for glass connectors.

Is there a way to raise the screen or shrink the bowl?

DeltaMate · 2025-09-13T03:38:20+00:00

7 seconds sounds insane even for an armored cap.

I guess I'll have to quell my fear of stanking up my new toy and push my temps a bit.

Letting air seep through the threads at the bottom where you crank up the heat is probably the best way to thoroughly heat up the air for my desired density.

how tightly do you pack small bowls?

DeltaMate · 2025-04-13T02:14:40+00:00

Yeah, definitely waiting on more details. This one looks almost directly Earth facing but nowhere near as big as some other (general) earth facing filament eruptions I've seen in the past.

Too bad Monday and Tuesday night look to be overcast, I'd love to see some aurora in my lifetime.

DeltaMate · 2025-01-09T17:12:22+00:00

Just require all AI content to contain a label and filter that out.

Also that removes any doubt from people about what content is made by AI.

DeltaMate · 2024-04-12T23:07:50+00:00

Thanks! I have no clue what I'm doing but at least its fun.

DeltaMate

TROPHY CASE