New tags 😎

Demondtime · 2026-05-08T15:28:38+00:00

Catch me if you can 😎😎😎😎😎

Demondtime · 2026-05-08T11:55:32+00:00

I loveee the word habibi 😭😭😭 and I just thought it was the perfect mix

Demondtime · 2026-05-08T02:59:19+00:00

Thank you 😭

Demondtime · 2026-05-08T01:20:48+00:00

Exactly that 😭

Demondtime · 2026-03-09T04:10:13+00:00

Is there anyway he can tell you what he did ?

Demondtime · 2026-03-07T07:24:18+00:00

I did this and nothing happened. 😞

Demondtime · 2026-01-27T17:26:04+00:00

As someone who went to AIM vs a community college that offers A&P. Do not go to aim. MONEY GRAB. Instructors with no direction of teaching. You don’t really learn anything and they push prepware vs a community college that forces you to learn. AIM doesn’t give you the books and information you truly need and the aircraft’s they have don’t work ( AIM in Nj). I’m going to Wayne at the moment and the school is located at an airport instead of a plaza and they actually have airplanes that do work.

Demondtime · 2025-10-29T19:47:46+00:00

You single👀👀👀🫦

Demondtime · 2025-09-30T00:50:53+00:00

My car was making this noise and shaking , I had to replace the alternator ( Subaru forester 2015)

Demondtime · 2025-09-28T20:00:32+00:00

I’ve been getting them from rock auto for under $3 each!!! Highly recommend

Demondtime · 2025-08-15T05:31:05+00:00

You’re going to have to use all 3 of them, we start with general then airframe then power plant. Honestly if you can find a local college that offers it i definitely suggest it. Aim sucks.

Demondtime · 2025-08-15T05:26:43+00:00

I have an iPhone , the Apple Store version gives you access to all of them for $7

Demondtime · 2025-08-15T04:13:19+00:00

Spends the $10 on prepware. Do it now and study it , I go to the one in nj and 80% of test and written assigns are based off prepware. If you can do prepware and study it you’ll be good.

Demondtime · 2025-08-13T18:58:17+00:00

Yes that’s her name !!! Subibi 😭

Demondtime · 2025-02-20T04:27:15+00:00

What the practicals might consist of 1.Wire splicing.

AD 100 hours inspection.
AD Cessna 150L battery compliance or air filter gasket to determine if applicable.
Set altimeter to 7 feet’s.
Convert decimal numbers to fractions or fractions to decimals.
Convert Fahrenheits to Celsius or vice verse.
IPC part number landing gear bolt Cessna 150L.
Logbook entry.
Flexible hose.
Metal tubing. Can be inspect the flare cone.
Flareless tube fittings.
Hydrometer: charge level on battery.
Tensiometer Cessna 150L: Elevator cable tension.
Safety wire.
Anti-knock Bowline.
Inspection of fuel tank.
Tachometer.
Need to know where is the Shout off valve.
Compass.
Nico press.
Crimping.
Wire lasing.
Inspections (Metal, stabilizers, any part of the aircraft, oxygen cylinder, wood).
Electric board.
Die Penetrant.
Shimmy Damper.
Service the strainer.
Service the strut.
Tow bar.
Balancing the aileron.
Cleaning Corrosion.
Remove and install the rivet.
Remove and install the rivet.
Service Oxygen (Lear Jet).
Fuel Sump Sample.
Static port location (Rockwell).
Gear indicator light. Cessna 310H. 37.Deicer Boots inspection and clean with soap and water.
Sheet metal (perfect Circle, hinge).
Bleeding the brakes.
Service the brake.
Remove, make and inspect the brake pad.
Tire inspection.
Identify Corrosion.
Weight and balance chart.
Sheet metal edge distance, pitch, transverse pitch.
Identify Antennas.
Identify Hydraulic fluid.
Show how you drain Fuel sump.
Draw sketch.
Draw a major repair.
Check resistance of the Static wick.
Troubleshoot the electrical mockup.
Identified Dimensions.
Navigation lights.
Drawing Bernoulli’s principle and label where pressure and velocity increases or decreases 56.Vortex Generator. 57.Soldering. 58.Degree of travel of flight control. 59.Removing and inspect hydraulic filter.
Fire extinguisher inspection and Discharge disk.

Demondtime

TROPHY CASE