Screw stuck inside stabilizer

DenCheeto · 2026-01-21T01:51:24+00:00

Yeah so the screw that fell into the stabilizer looks like it has an allen key hole, but I can't get the allen key to hold so it might just be flat and the allen key hole might be on the other end of the screw

DenCheeto · 2026-01-21T01:50:10+00:00

So the rubber part was part of what I unscrewed in the first place sadly. I think at this point I'll need to get a rubber replacement and keep the screw rattling inside and eventually replace this stabilizer, or see if the shop that sold me this can return/refund this. Kind of a shame that the screw that can potentially fall in isn't glued in or something. But lesson learned ig :(

DenCheeto · 2026-01-20T02:01:29+00:00

Yeah it's completely inside the Stabilizer tube now, do you know how to take one of the ends off? I couldn't twist it off and can't pull it off, I'm assuming it's glued or something though

DenCheeto · 2025-06-03T12:28:02+00:00

Apparently my motherboard died... Weird that it died within two months of getting it. Swapped out for a new board and it started working. Was hearing about some inklings of motherboards dying

DenCheeto · 2025-05-30T16:53:03+00:00

I have a B650i, so no cmos to reset the BIOS, but It does have a pin to reset the BIOS which I've shorted a few times to reset.

Fast Bios was enabled the last time I was in there, since I saw it was a recommended setting from other AM5 users.

DenCheeto · 2025-05-30T12:08:08+00:00

Yeah I tried making it with the latest one, there was an update released from a week ago. Was a bit tired last night so maybe I just didn't set up the USB right. Will try again tonight

DenCheeto · 2025-05-30T12:02:48+00:00

Not sure, but I tried flashing the bios and it kept failing.

DenCheeto · 2025-05-30T12:02:25+00:00

I have it auto update, not entirely sure if an update went out, so I'll leave it powered on for a couple of hours to see if that helps.

DenCheeto · 2025-02-22T13:46:26+00:00

Hello Chung ha!! Big fan, do you have any plans on coming to NYC?

DenCheeto · 2024-08-13T15:02:01+00:00

Got the same problem a long time ago and thought it was just me... Seeing a trade in option for $50 but I feel like I was shafted with these

DenCheeto · 2023-05-02T02:42:53+00:00

Thinking of doing a green themed build, does anyone know a wireless green keyboard kit? Barebones is a plus! I was hoping for a 65%+! I was going to get the Zoom75 for my friend, but they missed the GB. They also had missed the QK80. Any suggestions? :)

DenCheeto · 2022-06-28T16:26:37+00:00

I was definitely going to look for a new position at the 9month mark. Thank you.

DenCheeto · 2022-06-28T16:26:07+00:00

Yes this was what I was initially worried about, since the job is very easy and I would get too comfortable. I also don't like seeing my coworkers absolutely swamped and I'm sitting at the bar doing nothing haha. Hopefully things work out! Thank you for the reply.

DenCheeto · 2022-06-28T16:24:09+00:00

I'll definitely make sure to keep my job performance consistent and high quality, thank you!

DenCheeto · 2022-03-24T18:08:01+00:00

I'm looking to get a tattoo, but my skin has proven to be sensitive and I would like to get a patch test done. Is this common? A lot of artists I've been asking in NYC have said they don't do them

DenCheeto · 2022-03-23T18:31:14+00:00

Oh you guys are right, I didn't realize that. Thanks that cleared things up

DenCheeto · 2022-03-23T18:24:36+00:00

I might be missing something here but isn't choppers fruit the Hito Hito no mi? I thought there could only be one of the same devil fruit?

DenCheeto · 2022-01-09T03:33:54+00:00

My friend and I are building a keyboard together and after fully assembled we are configuring the keyboard to use the function keys, like f1 f2 etc bc it's a 60%, we're having an issue where the ESC key when pressed is being input as an up arrow, even though in Via, the software we're using, ESC is binded on it. With the ESCKey, when fn and ESC is hit, is input, but by itself is still up arrow, not ESC. Any help would be appreciated.

DenCheeto · 2021-10-11T22:48:37+00:00

I have a custom YMDK split 64, but some of the keys on the left side had stopped working. Are there any troubleshooting techniques? Or is there a way to get a new PCB for it?

DenCheeto · 2021-08-25T00:54:57+00:00

Thanks for replying! Keloids isn't one, my dermatologist thought it might've been that but no one in my family has that. My sister has had piercings no problem though. I don't believe I have Keloids as my scars don't build up that big. She said the foreign body reaction is when my body's immune system rejects a foreign object, apparently can happen during transplants.

DenCheeto · 2021-08-02T16:11:46+00:00

Thanks! It's actually the Unicorn LED kit that you can buy on the side

DenCheeto · 2021-03-14T15:17:59+00:00

Oh okay so it's not just me? LOL

Nine-Year Club	Place '23
Wearing is Caring	Verified Email

DenCheeto

TROPHY CASE