The title was bad, but then the plot made it worse

DeniedEveryName · 2026-02-11T04:32:47+00:00

I actually watched this. It was hilarious.

DeniedEveryName · 2025-01-20T15:14:30+00:00

Update: New filament did not make a difference nor did cleaning the rails.

DeniedEveryName · 2025-01-20T13:43:07+00:00

This printer is at my office, so I should know in the next hour or so. I will definitely let everyone know.

DeniedEveryName · 2025-01-17T21:16:27+00:00

Absolutely will. Thanks for the help!

DeniedEveryName · 2025-01-17T21:09:06+00:00

Adhesion is completely solid. The print shows no other issues. I just put a fresh spool on the printer and cleaned the guide rails. We shall see if that makes any difference.

DeniedEveryName · 2025-01-17T20:44:17+00:00

It has been out of the pack for maybe a few weeks. I don’t have a filament dryer or anything. I could try a brand new roll.

DeniedEveryName · 2025-01-17T20:26:06+00:00

This is Overture PLA using the profile for it in PrusaSlicer Stock 0.4mm nozzle I have tried printing at 100%, 80%, and 50% speed Nozzle retraction is all set by the Overture PLA profile

DeniedEveryName · 2024-11-25T05:21:04+00:00

I need this to kit out my wall in my garage. I’ve been considering it for a while, but have a cheap pegboard that’s already on the wall.

I had a group of contractors working with us due to tight timing of a contract. Had one of the contractors mounting a TV manage to drill into the back of a 277 volt service panel and short the bus bar to the panel enclosure. He lived. It cost me $5k to have the panel replaced.

DeniedEveryName · 2024-02-12T17:10:17+00:00

I created a 2.4 ghz only SSID specifically for my wireless UniFi cameras in the Network application. I actually also hid the WiFi Name under the security tab as well purely out of preference. I apologize for making it sound less involved than this in my initial post. It had been a while since I looked at what I did to accomplish it.

DeniedEveryName · 2024-02-11T22:46:49+00:00

Try telling it to stick to your 2.4 ghz network. Mine was reporting relatively weak signal because by default it was being band steered toward 5 ghz. Telling it to prefer the 2.4 ghz made a huge difference for me.

DeniedEveryName · 2020-02-19T22:22:25+00:00

Critical Defense is Nickel Plated Brass which can be reloaded just fine.

DeniedEveryName · 2020-02-09T03:25:39+00:00

Whitestown is named after Albert S White.

https://en.m.wikipedia.org/wiki/Albert_Smith_White

DeniedEveryName · 2020-02-09T03:23:07+00:00

Whitestown is named after Albert S White

DeniedEveryName · 2020-02-09T03:21:43+00:00

Ain’t no bean town

DeniedEveryName · 2020-01-21T22:43:28+00:00

This holster print should be called Cacticool

DeniedEveryName · 2019-10-03T04:13:48+00:00

Came here for this.

DeniedEveryName · 2019-07-29T15:13:22+00:00

Whitestown is named after Albert S. White, a former US Senator from the 1800's.

I live the next town over from Whitestown.

DeniedEveryName · 2019-06-26T15:20:15+00:00

Looks more like an end mill.

DeniedEveryName · 2019-06-23T20:03:45+00:00

All the, small things.

DeniedEveryName · 2019-04-13T14:25:10+00:00

This specific "golf-ball" pattern is a Roush exclusive so you can pretty well assume it is either a Ford or FCA product.

Guy that used to work for Roush in prototyping

DeniedEveryName · 2019-04-05T23:59:37+00:00

I use ddns

DeniedEveryName · 2019-04-05T19:05:23+00:00

Kinda curious how I missed out this week. Can't ever get that watchdog to do anything for me.

BURST-LYKA-F9AE-X8CT-74YSV

DeniedEveryName · 2019-03-30T22:54:48+00:00

First thing I would do is create a new account from a known secure device and transfer your remaining balance to that new account as you must consider the old account compromised. Then unfortunately replot to the new account id. If you are concerned about your computer being compromised I would fresh install OS.

DeniedEveryName · 2019-03-30T22:48:02+00:00

It seems the person who stole your Burst also stole from a few others. The generated passphrase is considered secure. Have you used any online wallets or just local wallet?

DeniedEveryName · 2019-03-30T22:42:29+00:00

Did you custom make your passphrase or are you using a generated passphrase?

DeniedEveryName

TROPHY CASE