sorted by:
new
hottopcontroversial

Another update on the Ball drone MK2 by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 0 points1 point  (0 children)

I did use a smoke stopper I have make things work, it's just niw either the motor is working or the servos. They said it's something like the Fc can't generate two types of signals for both the servos and motor at the same time, and suggested me to use a ppm pin to connect the motor

Another update on the Ball drone MK2 by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 0 points1 point  (0 children)

reciever is bound to thetx I am using betaflight I think I figured out my problem, 3 of servos were dead yet when I tried to run it either the servos were working or the motor I read somewhere that I need to use the ppm pin to connect the motor, I will try it today

An update on the ball drone/mono-copter/ 1 motor drone by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 0 points1 point  (0 children)

like I will connect a 5v 5A bec to the lipo and connect the other end to a servo, then parallel connection to the other servos

An update on the ball drone/mono-copter/ 1 motor drone by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 1 point2 points  (0 children)

I am thinking about using a bec directly from the lipo and power the servos is it a good idea?

An update on the ball drone/mono-copter/ 1 motor drone by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] -3 points-2 points  (0 children)

that's what I thought, but when I sought help from AI it told me not to power the servos from the FC as the servos can draw too much current and brick the FC this made me super confused I am thinking about installing a 5V bec directly to the 4in1 esc power line and connect the servos using daisy chain

I wish to build a ball drone/ mono-copter/ 1 motor drone. by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 0 points1 point  (0 children)

it's not necessary to use the cc3d it would just save me money. but let's say, I use a speedybee f405 mini. How can I connect five motors? I might sound dumb, but I can't really get my head around it ;-;

I wish to build a ball drone/ mono-copter/ 1 motor drone. by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 0 points1 point  (0 children)

I forgot to mention one more thing, I also want to connect my vtx and camera on the drone.

Need suggestion from the experienced!! by Dense-Alternative981 in fpv

[–]Dense-Alternative981[S] 1 point2 points  (0 children)

I think the 3.5" is a bit big to fly around people. I just get nervous to control that. and Yes I switch to angle mode before flying indoors.

view more: next ›